Question about 2004 Chevrolet TrailBlazer

1 Answer

2004 impala all lights work work but brake lights no fuses were found to be bad

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chevrolet Master
  • 2,050 Answers

There is a brake light switch located on the upper part of the brake pedal. This turns on the brake lights, and may be out of adjustment or bad.

Posted on Sep 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Chevy impala. Both blinkers work sometimes, most times they won't. Fuse or wiring issue?


sounds like a bad ground wire somewhere. look in the front where the lights are and under the hood for bad ground wire. also could be the switch going bad. i found bad grounds are a big part of every ones electric problems. well my own lol on GM vehicles

Mar 23, 2015 | 2004 Chevrolet Impala

1 Answer

Impala brake lights


When you say "nothing" do you mean you found no problems, or no power ?
Are you getting power in and out of the brake light switch when it is engaged ?

May 11, 2013 | 2000 Chevrolet Impala

1 Answer

Lights back of my impala not work and my panel lights do not work at night


It sounds like a blown fuse..check owners manual for (fuses) Tail/brake lights

Jun 09, 2011 | 2004 Chevrolet Impala

1 Answer

My 2004 Chevy Impala Brake lights don't work. I checked the bulbs and fuse. All is ok. I replaced the brake light switch with a new one. Still nothing. Is there a relay somewhere that I am missing?


You have 2 brake lite switches . Did you replace the one for the brake lite or the one for the single lite. Check again please...when you replaced the brake lite switch .. did you check and see if the bakes lights were on and if they were on. If they were the problem is in the adjusting of the switch. If not check for the relay..Good Luck!!!

Nov 03, 2010 | 2004 Chevrolet Impala

1 Answer

I HAVE AN 02 IMPALA AND MY INSTRUMENT LIGHTS AND TAIL LIGHTS DONT WORK WHEN I TURN ON THE HEAD LIGHTS


Check the fuse box and look for a blown fuse. If the fuse keeps blowing, then there might be a bad wire somewhere or the brake light sockets may be corroded. That can cause problems an cause fuses to pop. Hopefully, it's just a blown fuse and and not too bad of a problem.

Jan 09, 2010 | 2001 Chevrolet Impala

1 Answer

2004 chevy impala....my brake light fuse keeps blowing...fine when you replace the fuse but then when you step on the brake it blows (the fuse that say BRK SW}


you have a short somewhere. if it is the brake switch fuse it is probably the brake switch which should somwhere on the pedal arm or actuated by the pedal arm. also check your bulbs if you haven't already. hope this helps.

Mar 25, 2009 | 2004 Chevrolet Impala

1 Answer

2004 impala break lights won't work


DID you check all fuses? If it is not a fuse and the bulbs are good its a wiring problem.. i have same car. if one bulb goes out they all do.. (and fuses) i think its a manufactored problem...

Jan 02, 2009 | 2004 Chevrolet Impala

1 Answer

I have a 2004 Chevrolet Silverado K2500 Crew Cab and the cab mounted break light doesn't work. I replaced the bulbs and still nothing. I cannot find a fuse or I just don't know what it would be labeled as.


First check to see if you have power to this light when you step on the brakes. if not there is probably a break in the wireing because if the regular brake lights on the rear of the truck are working then this light should work off the same fuse.

Nov 26, 2008 | 2004 Chevrolet Impala

2 Answers

2004 Chevy Impala Brake Problem


I did a complet brake job on my 2004 Chevrolet Impala about two weeks ago, and i still have warning light on. Thw system is working great. So how do I turn off the warning Lights, Traction off light, Brake light, and in warning center Low brake fuild?

Jul 08, 2008 | 2004 Chevrolet Impala

Not finding what you are looking for?
2004 Chevrolet TrailBlazer Logo

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...