Question about 2007 Nissan Frontier SE Crew Cab

1 Answer

The driver's window won't go up; what seems like the problem?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Nissan Master
  • 2,050 Answers

Electric? Usually the motor, but with a volt meter you can see if you have voltage and a ground at the motor harnes while moving the window switch. Then you will be sure.

Posted on Sep 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2007 vw eos drivers window won.t close,all others works fine


Could be the master switch because the drivers window is mostly used, or the window motor/regulator. same reason. Easy to check with a volt/ohm meter. You'll need wiring/pin outs for electrical.

Sep 01, 2016 | 2007 Volkswagen Eos 2.0T

1 Answer

Window on driver side won't go up or down(manual)


more than likely off the track. have you pulled the door panel off to see?

Feb 12, 2013 | 2005 Chevrolet Cavalier

1 Answer

F150 dome lights won't come on and power windows won't work when I open the drivers side door.


fuse needs to be replaced. probably in the engine compartment or under dash.

Oct 07, 2012 | Ford F-150 Cars & Trucks

1 Answer

Drivers side power window won't go up or down


I couldn't find one for an 88 but they haven't changed much over the years and this should give you and idea of what your looking for

Jul 17, 2012 | 1988 Ford F 150

1 Answer

Windows won't roll up in my axiom


of course, the FIRST thing to check with anything electrical are the fuses

Jan 04, 2012 | 2003 Isuzu Axiom

1 Answer

Window switch for drivers side window/ window won't move all the rest work window stuck about 3 inches open


The driver side window switch panel and the circuit needs a check including the fact that there is POWER to the panel - if in case the power cable harness has opened in the door hinges.
Now the rest of the windows seems to cut off as there is friction when the glass goes up which can be a glas channel friction or if the motor drive is fault and so cuts off on load. You need to remove and check for free movement of the window glass and also check for the load bearing on the winder to confirm. Check for +12 voltage without loss to all the windows for the drive.

Oct 11, 2011 | 2005 Kia Amanti

1 Answer

2005 equinox left front window some times will go up and down , however most times times it seems to stick won't go up or down unless you help it to start moving. Should you stop it half way it seems to...


I have a similar problem with the same window. The window doesn't stop moving but it tilts forward until it won't close properly leaving a 1 inch gap between the top left corner of the window and the door frame from the perspective of sitting in the drivers seat. I had the motor and regulator replaced but to no avail.
I took off the door panel, everything looked fine. Took off all the weather strips and the driver side mirror. Behind the mirror there is the top portion of the metal guide the edge of the window rides up and down. it was partially cracked and bulged out beneath the crack. I gently pounded it back in and cleaned out the guides on both sides with window cleaner and WD-40. The issue will not be completely fixed until I replace the metal guide but it runs much smoother now.

Apr 30, 2011 | 2005 Chevrolet Equinox

2 Answers

Power windows won t work


MY POWER WINDOWS WOULD WORK AND THEN NOT WORK, IT SEEMED TO BE WHEN I WOULD SHUT THE DOOOR THEN THEY WOULD WORK, THEN CLOSE THE DOOR AGAIN AND THEN THEY WOULD QUIT AGAIN. THEY ALL STOPPED WORKING AT THE SAME TIME, IT SEEMS TO HAVE SOMETHING TO DO WITH THE DRIVERS SIDE DOOR. NOW THEY WON'T WORK AT ALL.

Apr 15, 2009 | 1995 Jeep Grand Cherokee

2 Answers

Drivers door panel removal


The book says 1. remove power accesory switch panel by using suitable flat blade tool at front. 2. Disconnet electrical connections.
3. pry door handle plug by using small flat bladed tool
4.remove door trim handle mounting screws
5. remove door trim panel from retainers.Start at rear bottom corner and pry outward.
6. remove door panel.
KD does make a tool that will properly pry the door panel away from reainers. KD 3705 You might get by with a screwdriver.
One other thing you may need to have the window down to get the panel to come off. You will have to lift up on it once it is loose from the fastners.
Hope this helps you out.

Mar 23, 2009 | 2003 Chevrolet Malibu

Not finding what you are looking for?
2007 Nissan Frontier SE Crew Cab Logo

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...