Question about Chrysler Town and Country

1 Answer

I have a 2003 town and country and trying to figure out why my doors wont lock when using the keyless entry and when i try to lock it by using my hand to push the button down manually

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 5,763 Answers

This sounds like a frozen door lock actuator, this is the part that locks and unlocks the doors, this is part of the latch, you will need to replace latch asm, the first thing to do would be to remove the door panel and make sure the latch is not rusted and jammed, i kinda doubt it as the door is opening and closing good but i would still look. hope this is helpful.

Posted on Sep 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Door locks keyless entry won't work


Try changing the battery in the pad, or check the fuses under the dash

Jan 24, 2012 | 2003 Pontiac Montana

1 Answer

What would you do when your 1996 lincoln town car doors won't lock with the key. And the trunk won't open.


How can a lock not lock or unlock with a physical key? Maybe the cylinders are frozen? Try squirting a little oil into the locks.
1996 Town Cars have keys and keyless entry. The physical keys are two, an ignition key and a door key. You can't use the door key in the ignition, nor the ignition key in the door. They aren't interchangeable.
The default key code for keyless entry is posted on the right trunk hinge, inside the trunk.

Jul 19, 2010 | 1996 Lincoln Town Car

1 Answer

Keyless entry won't work, only drivers side works electronically


Look for a door lock relay in the fuse panal alot of them are the same swap them around with the door lock one to see if it is bad

Dec 27, 2009 | 2003 Chevrolet Silverado 1500

1 Answer

My car alarm will not reset and the issue with problems below


If you (hopefully) have the key fob (keyless entry remote), try closing the doors, then lock and unlock using the keyless entry. This should reset the security so the vehicle will start.

Jul 04, 2009 | 1998 Chrysler Town & Country

1 Answer

Keyless entry on honda civic 2006 not working


The keyless entry is designed to work with the doors closed (closed - not locked). If the door ajar sensor thinks the door is open the keyless entry is disabled. When you manually lock the door it might tighten the door just enough to activate the keyless entry. I would try slamming all the doors closed and then see if the keyless entry works. If it still wont work have the wiring checked on the front door lock.

May 12, 2009 | 2006 Honda Civic Hybrid

1 Answer

Power sliding door will not activate when outside handle is pulled on chrysler town and country 2002


oh we have a 02 C T & C and our keyless entry for the sliding doors. when the side doors are not closed all the way or opened all the way the keyless entry won't kick in. try doing it closed or fully open, if this does not work try checking the battery in the remote. over all lets put it this way the 02 C T & C is like the best mini van around however it comes with alot of problems from ac. to tail lights

Apr 06, 2009 | 2002 Chrysler Town & Country

2 Answers

My remote for the keyless entry does not work.


does trunk button work? panic button?
here's 2003 info:


  • The doors do not lock/unlock using the remote transmitter
  • Remote transmitter.
  • Driver door module (DDM).
  • Go To Pinpoint Test G .

SECTION 501-14: Handles, Locks, Latches and Entry Systems 2003 Town Car Workshop Manual
GENERAL PROCEDURES Remote Transmitter Programming
  1. Cycle the ignition from OFF to RUN four times within three seconds. The locks will then lock and unlock, confirming that the program mode has been entered.
  1. NOTE: When the first keyless entry remote transmitter is programmed, all other keyless entry remote transmitters are erased.
    Press any button on the transmitter to be programmed.
  1. If additional keyless entry remote transmitters are to be programmed, repeat Step 2 within 7.5 seconds.
  1. To exit program mode, turn the ignition to START or wait 7.5 seconds.
--------------------------------------------------------------
report back

Mar 22, 2009 | 2004 Lincoln LS

1 Answer

2003 Yukon XL Front passenger side door: Electric


yes it does sound like that is your problem. try checking for used one.

Mar 11, 2009 | 2003 GMC Yukon Denali

2 Answers

Reprogram a keyless entry remote


Hello
this is how to program the remotes/keyless entry

How
  • Obtain all remote transmitters
  • enter the 5 digit permanent code into the keyless entry pad on the drivers door
  • Press the 1-2 switch on the keyless entry pad
  • Within 5 seconds
  • Press any button on the first remote transmitter
  • The doors should open then lock
  • Within 5 seconds
  • press any button on the second & third remote
  • within 5 seconds for each remote
  • to exit programming
  • simultanionusly press 7-8 & 9-0 switchs on the key pad or wait more then 7.5 seconds
NOTE
The 5 digit permanent code is located in one of the following places
  1. On the owners warranty card
  2. On the label on the inside the trunk/ boot
  3. On the owners code card
  4. On the centrel locking control module located in the drivers door
  5. In the PCM ford can get this for about $25.00
I hope this help
Regards Paul
www.limotec.co.uk

Jan 13, 2009 | 1995 Lincoln Town Car

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...