Question about 2001 Dodge Stratus
First jack up side you will be working on and place jjackstand under the frame, next remove the wheel,to make it easier remove the caliper and tie away, dont remove the brake hose!, then remove the rotor it slides off you may need to tap backside with a hammer, next is to remove the bolt and nut from the lower balljoint, then use balljiont tool to saperate the lower control arm from spindle, you may need a pry bar to pull down on control arm to completly separte move spindle to side and let arm up, next remove the axle (cv) nut on the front, then use pry bar to pop out of trany, install new axle hold straight and slide into tray as far as you can then with nut on the axle a little tap to axle in to trany the rest of the way you will feel it go in and lock and then reverse direction to put back together, hope this helps.
Posted on Sep 02, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jul 20, 2014 | 2001 Dodge Stratus
Jan 17, 2014 | Cars & Trucks
Aug 12, 2013 | 2001 Dodge Stratus
Dec 13, 2011 | 2001 Dodge Stratus
Oct 05, 2011 | Cars & Trucks
Mar 04, 2011 | 2001 Dodge Stratus
Mar 28, 2010 | 2001 Dodge Stratus
Feb 11, 2010 | 1999 Dodge Stratus
438 people viewed this question
Usually answered in minutes!