Question about Nissan King Cab

1 Answer

I have a nissan interstar 2.5 2005 model. The cam belt broke 3 weeks ago and I asked a mechanic to sort it out. He eventualy got it back together but now he has spent 4 days trying to start it. The engine starts on easystart but will only keep going if on full revs. There is lots of smoke. No engine management light on when engine is going. Cams where timed up correctly and diagnosis says no faults. Any clues?? Thank you John

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 5,763 Answers

Well the first thing is to do a compression test, too make sure that when your belt poped no valves got bent, i think you will see that theres low or no compression in some cylinder from bent valve, if so then have the head removed and repaired, if it has compression then its not the valves, i would triple check the timing marks and make sure the correct marks are being used, you may want to do this before the test, hope this helps.

Posted on Sep 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nissan Civilian CO sensors


think this is about air quailty

cant find the listing for co sensors on the nissan civilain

these sensors fit the nissan interstar bus 2006

Sensors NISSAN INTERSTAR Bus X70 dCi 150 107 KW 145 PS from 2006 Electrics
26220085-rbhpigkjbg41n3t3ajiek4my-1-0.jpg

Jun 17, 2016 | Nissan Cars & Trucks

1 Answer

Nissan terstar dci 120 not starting flashing red stop light


no year, now that makes for a long story, huh?
what is a terstar?
you ment , INTERSTAR (so says google.)??????
a VAN.
ouch wiki is only in German....
2003-10 (transated)
Analogous to the revision of the Renault Master II / Opel Movano I also received the Interstar 2003 a revision of the body, engines and interior. Since then, an automated manual transmission (Interstar X70) was for the revised model now available and optional ESP (vehicle dynamics control) available. Also belonged from now a Brake Assist besides the previously installed anti-lock braking system standard on all models. Since then, the Interstar has been delivered as a minibus with up to 16 seats. 2010, the Interstar was replaced by the Nissan NV400.

NO START.
but to start any DIESEL engine,
IT MUST Crank first. does it?
if NOT, the the battery is dead, or bad. (or discharged)
DOes jumper cables used, (donor car) crank engine now?
if it DOES, crank, and robustly, then Id bet the glow plugs are bad.
if not glow plugs, lack of FUEL , ever change the filters per schedule>?

open glove box, extract the operators guide, I PROMISE
it tells you what the RED lamp means..
if lost , get one. from NISSAN , they are free.

Jul 04, 2014 | Cars & Trucks

1 Answer

How to change main belt on nissan interstar bus


go to www. automecanico.com + www.autoelectronico.com since the web is in spanish, the comments coming in english. However you must find ANY information complete for diagnose, troubleshooting, and repair for ANY car do you need.

God bless you

Jun 27, 2012 | Nissan Nissan Cars & Trucks

1 Answer

Hi there, I got a Nissan Interstar Engine recently built, drove the vehicle for a day, and I have spotted a oil leak, I took it to a mechanic and he told me the rear main bearing is leaking oil, but now...


Hi, You may have done more damage than your mechanic says. The oil may have been very low to start. Bearings and valve cam needs oil. You have already burned the turbo. (lack of oil).
Good luck.

Jun 09, 2011 | Nissan Minivan Cars & Trucks

1 Answer

2005 Altima Nissan break light and battery light went on then car died 2 days later. Replaced the battery but lights did not go off. I think that @ two days ago I heard like a thump like a belt broke or...


Check alternator belt. Light is to show alternator working, not battery state.
If you have a volt meter check output is around 12.5 -14.5 volts when car running.

May 27, 2010 | 2005 Nissan Altima

1 Answer

Squealing fan belt.


New belts tend to stretch after a week or two.Simply retighten the belt now that it has settled in & it will be fine.Was it the alternator belt?That is the most common one to sqeal after replacement.Hope this helps you.

Mar 28, 2009 | Nissan Pickup Cars & Trucks

1 Answer

HONDA CRANKS LIKE IT HAS NO COMPRESSION OR BROKEN TIMING BELT .


Remove the valve cover, and watch the cams while cranking it. My best guess is that one if them is not turning. This would explain why there is only compression in once cylinder. Sure the timing belt may be in tact, but if the cam guide pin is sheered off, and bolt that holds gear to the cam is loose, it will cause this.

Mar 27, 2009 | 1990 Honda Civic

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

373 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...