Question about Chrysler PT Cruiser

1 Answer

Have bought two new low beam bulbs in three days for my 06 pt cruiser but the passenger side low beam headlight fails to work. the manual doesn't state anything about a passenger side low beam fuse

Posted by on

  • lavonelbert Sep 02, 2010

    I REALLY DONT KNOW. I DONT KNOW HOW TO TELL IF ITS FAULTY OR NOT

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 4,070 Answers

Hi! Before the replacement, is the low beam on the passenger side faulty? Please write back. Thank you for using FixYa!

Posted on Sep 02, 2010

  • dj_relly999
    dj_relly999 Sep 02, 2010

    What I mean is, before you replaced the bulbs are the old bulbs faulty?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Driver side headlight goes dim on high beam while passenger side is bright


bad connection or bad earth check all connection or bulb

Jan 24, 2016 | Cars & Trucks

2 Answers

What would cause the low beam headlight not to work when all other lights work?


If you have standard halogen bulbs:

  1. Burned out light bulb; or
  2. Fried wires between the dashboard wiring harness and the headlight bulb connectors; or
  3. Fried headlight bulb connectors.
If you have HEI emitters:
  • Failed ballast.

May 11, 2015 | 2002 Mercury Grand Marquis

1 Answer

Low beam light on my 2003 pt cruser diver side dont work


Simplest answer is probably a bad filament in that new bulb.

Jul 07, 2014 | 2003 Chrysler PT Cruiser

2 Answers

I have a 1995 Ford Explorer Limited and the high beams work but the low beams and fog lights do not, please help....


These trucks are known for bad multifuction switches.
the switch that i talk of is the signal switch , the handle is the switch, it bolts to side of steering column . this switch controls the signals and the headlights and high /low beams. the other thing is the headlight switch connector, the connector some times goes bad and starts to melt or just comes out of the connector. you will need to remove the cover to steering column, the screws are located under the bottom cover in holes. remove cover and check connector and then test for power if you have power going into switch but not coming out then switch is bad.

the last thing is to make sure the bulbs are good , make sure the headlight bulbs are good , and also the driving light bulbs, test for power at the connectors to those lights to.
You will need to do a little testing to find the problem.

Nov 22, 2012 | Cars & Trucks

1 Answer

Hello. i have a 06 pt cruiser limited edition. my low beam light on passenger side does not operate,but the driverside low beam does.my high beam,tail lights directional signal all work. what could be the...


your headlight bulb may have a high & low beam filament in it, if so the low beam filament is blown & you will have to replace the bulb.......cheers

Aug 16, 2011 | 2006 Chrysler PT Cruiser

1 Answer

Hi, I have a 2002 Buick Rendezvous and the high beam light will not come on on the Passenger's side headlight. The low beam works great and the high and low beams work great on the driver's side. We have...


Make sure the high beam realay under the hood fuse box is working. You can swap the hi beam relay with the horn relay to test. The hi beam filiament in the bulb can be open too.

Mar 24, 2017 | 2002 Buick Rendezvous

3 Answers

I have a 2003 PT Cruiser and I need to replace the low beams on both sides. Is this something I can do?


no you will have to replace the bulbs as you cannot replace just the low beams, the low and high beams are both located within the same actual bulb, you can replace the bulbs yourself, refer to your owners manual to find instructions on the proper procedures for this...

Dec 22, 2009 | Chrysler PT Cruiser Cars & Trucks

1 Answer

Right side headlight (low beam) dead


clearly volts without amps. pinch wire bad socket or multifunction switch under cover on steering column.

Jan 25, 2009 | 2006 Chrysler PT Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...