Question about 2002 Pontiac Bonneville
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
get new cylinder look at it and see the spring loaded tab you need to push in. Now pull the steering wheel column lock plate (gm tool required unless you have super thumbs) pull out key buzzer switch , roll key over to unlock wheel, press the same area on the lock cylinder to release it
Posted on Nov 19, 2008
SOURCE: unplug wiring harness
there are usually clips holding it in.... and from doing my windstar.... it is an extremely tight fit... i believe i had to use a screw driver to pry it looks... make sure the battery is unhooked when you do that
Posted on Dec 18, 2008
hit it between hub and studs with out hiting studs and or hit up around the hub bearing with a torch acetylene torch that is and it should pop off.
Posted on Jun 11, 2009
Your public library will have a manual covering your mechanical repair. Moreover, they have the automotive shops online software called AllData. It is the best auto technician database available today. You can print out specific troubleshooting procedures, diagrams, step-by-step istructions, and soforth. The typical person cannot afford to pay for this service, just automotive dealerships, etc... that is why the public library made it available to everyone and for free to view and print out material. This should Fixya! Good Luck!
Please rate my assistance.
Posted on Aug 29, 2009
assuming that u have replaced any bad fuses. you have to remove the cover around the instrument panel. then u need to have a socket small enough to remove the screws that hold the head light switch in place. the head light switch knob should come out. you may have to pull it out first before u take the cover off. then remove the old switch and disconect the wires then replace the switch. i hope this helps
Posted on Aug 18, 2010
Tips for a great answer:
Feb 20, 2014 | 2002 Pontiac Bonneville
Mar 24, 2013 | 1999 Pontiac Bonneville
Mar 16, 2012 | 1989 Pontiac Bonneville
Jul 23, 2011 | 1998 Pontiac Bonneville
Jul 06, 2011 | 2002 Pontiac Bonneville
Dec 30, 2010 | 2002 Pontiac Bonneville
Oct 15, 2009 | 1989 Pontiac Bonneville
Sep 17, 2009 | 2003 Pontiac Bonneville
Jul 07, 2009 | 2002 Pontiac Bonneville
494 people viewed this question
Usually answered in minutes!