Question about 2002 Ford Explorer
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
You should take the vehicle to a certified dealer immediately; Your airbag could deploy prematurely causing serious injury or death!
Posted on Mar 31, 2009
You have a bad Passenger Air Bag Deactivation Indicator. The bulb that shows when the passenger air bag is off.
Have seen alot of these go bad especially in police cars. The part number you need is 5W1Z-10A936-A.
Posted on Apr 15, 2009
The automatic air bag sensor is tested EVERYTIME to start the car/van. Your system has detected a failure in the Air Bag deployment sensor. It is not dangerous... but the air bag with the faulty sensor will not deploy in an accident.
Posted on Oct 13, 2009
get the code, but my guess is it\'s the seat belt pre-tensioner connectors. There is a TSB to replace them on both seats at the same time. Not a recall so not covered under warranty. Please rate highly if this helps.
RESTRAINT SYSTEM - SAFETY BELT BUCKLE AND PRETENSIONER DIAGNOSTIC TROUBLE CODE (DTC) B1877 AND/OR B1881
This article supersedes TSB 04-24-4 to update the service procedure.
Some 2001-2004 Escape vehicles may exhibit an intermittent air bag lamp on and diagnostic trouble code (DTC) B1877 and/or B1881. This may be caused by a variation in the electrical continuity between the pins of the driver and/or passenger side wiring harness and the buckle pretensioner connector. If this condition were to occur, the air bag system remains fully functional.
Install a replacement harness connector kit ON BOTH the driver and passenger safety belt buckle pretensioners, even if the DTC is present for only one side. The kit includes improved connector halves to replace the existing connectors on both the body harness and the safety belt buckle pretensioner.
One kit is required per side (2 kits per vehicle). Refer to the instruction sheet included in the kit for complete repair procedure.
2001-2004 Escape Install A Replacement Harness Connector On Both The Body Side And Safety Belt Buckle Pretensioner Harness For Both Driver And Passenger Safety Belt Buckle Pretensioners (Do Not Use With 14056D)
Posted on Sep 09, 2010
Tips for a great answer:
Jul 30, 2008 | Mazda B4000 Cars & Trucks
Jun 08, 2015 | 2003 Chevrolet Avalanche
Nov 05, 2014 | Cars & Trucks
Jun 03, 2012 | 2003 Ford Escape
Nov 18, 2010 | Ford Expedition Cars & Trucks
Aug 06, 2010 | 1996 Nissan 200SX
Apr 09, 2009 | 1997 Nissan Maxima
38 people viewed this question
Usually answered in minutes!