Question about 1992 Subaru Legacy

1 Answer

I have a 1992 Subaru Legacy 2.2L turbo, that is miss firing in its # 3 cylinder. It gets spark and i have changed the fuel injector but it still runs the same. the spark plugs & wires have been changed. Any thoughts on the subject would be great. THX.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Subaru Master
  • 22,246 Answers

Take the head off and do a valve grind in ?? valve springs ?? weak broken .low compression??

Posted on Sep 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there anyone who has added turbo on a 1999 Subaru Legacy GT 2.5 liter?


I would do a Google search on this. If you add a turbo you must make many other changes to the engine management system, bigger capacity fuel injectors, hight capcity fuel pump, different cylinder head gaskets improvements to the transmission and so on. You can't just bolt it on.

Oct 05, 2012 | Cars & Trucks

2 Answers

We have a Subaru Legacy GT, Twin Turbo 93, the car cut out and will not start, no fault codes, replaced spark plugs, fuel filter, checked the fuel pump, replaced air flow meter, engine temperature sensor,...


sounds like your timing may be off, or have a crank shaft postion sensor failing, when it cuts are you losing spark completely? do you have a fuel pressue gauge? whats the pressure? also you could try running it with the map sensor unplugged and see if the condition improves

Jul 31, 2011 | 1993 Subaru Legacy

1 Answer

I have a '92 Subaru Legacy automatic that has been running like its on three cylinders.I had put bad gas in my car from a friend that said it was good. (he worked at a junk yard). I ended up changing a...


to check miss fire run engine when warm and at idle remove injector wire one at a time when disconnected engine will run rougher if there is no change to engine when injector is disconnected that cylinder is not firing check wire and plug if ok compression test cyl

Jan 14, 2011 | Subaru Legacy Cars & Trucks

1 Answer

I had this code PO300, P0302, and p0301. I changed my spark plugs but engine wont't start.I'll like also to know the probable causes of misfiring too,please.


300 is multiple cylinders miss fire, 301, 302 you have cylinder 1 and 2 miss fire. check your wires and fuel injectors on those cylinder

Feb 27, 2010 | 1992 Lexus Es 300

1 Answer

Subaru legacy gt twin turruns like it only running on 3 cylinders


nee to test fuel injectors and watch engine electronics thru a scanner? another thing you might check is the airintake rubber bellows goes from air cleaner to engine for cracks or leaks? if all that checks out run a compression test ?

Aug 27, 2009 | 1996 Subaru Legacy

2 Answers

Engine seems to run good then goes downhill


Have a look at the fuel pump it looses pressure when hot which means it is due to be replaced.

rate this please

May 24, 2009 | 1991 Subaru Legacy

1 Answer

91 LEGACY STARTED RUNNING ROUGH


The cylinders are numbered as on the spark pack you changed. You might have done better putting the seafoam in the tank as an injector cleaner. Not sure why you changed so many parts, you seem to know how to get the codes from test connector lead hookup and the blink pattern. You might also want to check the fuel rail pressure and the crank and cam angle sensors. Before replacing the injector, swap the #4 injector with the adjacent one and see it the code moves with the injector or stays put. If the code stays on #4, then check the injector wiring, if it moves clean or replace the injector.

Mar 16, 2009 | 1991 Subaru Legacy

1 Answer

Miss fire in cylinder #1, 1998 subaru legacy outback


fuel injectors getting ground from pcm?

Oct 29, 2008 | 1998 Subaru Legacy

2 Answers

95 volvo 940 running rough


Have you checked compression on non firing cylinders? Likely has blown head gasket between these two cylinders if located side by side.

Jun 24, 2008 | 1995 Volvo 940

Not finding what you are looking for?
1992 Subaru Legacy Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...