Question about 2008 Chevrolet Malibu

2 Answers

Are they electric brakes on the 2008 Chevy Malibu??

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Contributor
  • 264 Answers

HI, no your car has standard hydraulic brake system it may have disc brakes front and rear or disk in the front and drums in the rear. It should also have ABS breaking which parts of this system are electronically controlled. If there is more you r needing or wanting to know be sure to ask and i will try and give you the information. Thank you.

Posted on Sep 02, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

No all hydralic with electrical ABS system

Posted on Sep 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Find fuse box for 2008 chevy malibu


Like most newer cars, your Malibu has two fuse boxes. One is under the hood, just outboard from the battery. [really lousy place to put electrical stuff, right next to a container full of acid. Be sure to keep the outside of your battery clean, or you will be buying a new fuse box/wiring harness in the future] The second fuse box is located in the trunk, just above the driver's side wheel well [left rear wheel well]

Dec 03, 2014 | 2008 Chevrolet Malibu

1 Answer

How do i change the cabin filter on a 2008 chevy malibu


It is located under the cowling on the right side if you have one ( note you will have to take off the windshield wipers off to get to it.

Oct 17, 2014 | 2008 Chevrolet Malibu

1 Answer

2008 chevy malibu third brake light not working


Stop Lamps
The body control module (BCM) is responsible for controlling the stop lamps. When the driver presses the brake pedal, the BCM will receive a signal from the brake pedal position sensor. The BCM then supplies battery positive voltage to both left and right stop lamp assemblies and to the center high mounted stop lamp (CHMSL). The stop lamps are grounded at G401 and G403. The CHMSL is grounded at G302.
Did you check the blub , is there power ( B+) at the third light ? Is the ground G302 good ? Do you have a DVOM - digital volt ohm meter , do you know how to use one ? Do you know what voltage drop is ? an know how to test it ? Check the stop lamp relay in the under hood fuse / relay box.
Did

Dec 16, 2012 | 2008 Chevrolet Malibu

1 Answer

Chevy Malibu Brake light Problem when pedal up or when key on brake lights are on


Disconnect the brake light switch under the dash above the pedal, if the brake lights go off adjst or replace the switch.

Oct 29, 2012 | 2008 Chevrolet Malibu

1 Answer

My 2008 Chevy Malibu won't go into park and I can't take the keys out of the ignition.


There is a problem in the shift linkage or internally in the transmission.
Needs further diagnostics.

Jul 27, 2012 | 2008 Chevrolet Malibu

1 Answer

How do you compres the rear caliper on a 2008 chevy malibu


use a special tool or long nose pliers to turn the piston either clockwise or counterclockwise (not sure which way) while you push in on the piston. make sure to seat it all the way down (to make clearance for the new pads to be installed) also, be carefull not to nick the rubber seal aroud the pistons outer edge. Hope this helps you out !!! PS make sure you have the emergency brake released.

Jul 16, 2011 | 2008 Chevrolet Malibu

1 Answer

How much does it cost to replace breaks on a chevy malibu when you hear the metal to metal sound.


There is no reason to hear metal to metal

That is abuse

Those brakes,all four, need to come apart
once a year for cleaning,inspection and lubing,
on all vehicles

Done properly at least $100.00 per wheel
position

Feb 10, 2011 | 2008 Chevrolet Malibu

Not finding what you are looking for?
2008 Chevrolet Malibu Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...