Question about 1991 Oldsmobile 88

1 Answer

Will my injectors work from my 1991 olds in my 1988 olds both r delta 88 and r 3800 sereis engins

Posted by on

  • 1 more comment 
  • crystal_233
    crystal_233 Sep 02, 2010

    do u know what other parts are compatible lol my car with leaking injectors also needs a new rad and fan and heater core lol but the other car wont start and when it was running it was always stalling and back firing we replaced modulater in it and still does it so i give up lol ty maly

  • crystal_233
    crystal_233 Sep 07, 2010

    ok so i took the injecters out of the old car and they work. but i have discovered a new prob i can run the car all day and its fine but the second i turn it off it wont start for a few hours tell the engine is cooled by 3 hours ish any ideas

  • crystal_233
    crystal_233 Nov 20, 2010

    hey mally if u see this i have another question up that i desperatly need help with please help me!!!!!!!!!!!!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Yes they will work

Posted on Sep 02, 2010

Testimonial: "ty verry much maly now i have taken what i need out of the other car and started fixing my girl i have another one posted if u can look at it pls"

  • 1 more comment 
  • crystal_233
    crystal_233 Sep 02, 2010

    for sure lol and do u know what else maybe compatiable from one to the other

  • malyduquette Sep 02, 2010

    all engine parts will fit radiator should fit as well

  • malyduquette Sep 02, 2010

    sounds like the cam maybe shot on the other car thats not running

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1991 olds location fuse for memory power/no back up power radio & ac control


now its not a 1988 but a 1091 olds, and not a Dakota.
im totally gobsmacked. what is it, below is Dakota answer
if it is an Olds what model car , what engine?

ok , the posts come out of order, i answered your first post
with a question, and he it is the memory fuse.
what engine?
2.2 L (134 cu in) K I4
2.5 L (150 cu in) K I4
2.5 L (150 cu in) AMC I4
3.9 L (238 cu in) LA/Magnum V6
5.2 L (318 cu in) LA/Magnum V8

the 2.5 ECU memory pin as pin A41 red wire
and goes to the battery via the main FUSE LINK.
i looked at the schematic for the other engine, same link.......
id bet dollars to donuts its not bad.
there are 3 links, one for Altenator, (is it dead) one for A/C and heater blower, is it dead, and one to drive the input to the ignition swich
the ignition goes dead, if that red wire is dead.
so is A41, not at 12v at all times.

my guess, is you posted to Dodge forum ,why do that?
post to OLDS. with engine size and correct year and model OLDS>
there are 10 Oldsmobile models, name just 1.
like Delta 88?

Jun 07, 2014 | 1988 Dodge Dakota

1 Answer

How to change a thermastat on a 1988 olds delta


Hello: Follow the top hose coming from the radiator to the engine toward the drivers side. Remove hose from housing. The thermostat is under the housing. Here is where it gets tricky, steel bolts go into aluminum and have a tendency to freeze up, if you force them you may break them off. Do this before attempting to do the task. Get engine hot then spray with WD-40. Let soak a couple of days. If that doesn't work, again get engine hot, pour brake fluid around bolts and soak for a couple of days. You don't have to drain more than a couple of quarts out of the radiator to do this job.

Oct 18, 2011 | 1988 Oldsmobile Delta 88

1 Answer

I have a 1988 delta olds and it will not crank


Move shifter to N and start the engine.
The netural safety switch can be bad.

Mar 05, 2011 | 1988 Oldsmobile Delta 88

1 Answer

I have a 1988 olds calais quad4, the engine had head gasket leak. i have a new never been used 1991 quad 4, the 1988 block has some pits in it. can i use the old 1988 head on the new 1991block.would the...


At first I was going to respond yes, but not sure when there is a huge difference of fuel pressure between the two systems. Even then, I'm not too sure, depending on specific model of the engine in question, as subtle changes were made between same engine even on Lumina to to Cutlass, and even worse, with California specific models

Feb 16, 2011 | 1988 Oldsmobile Calais

1 Answer

Location of 1988 oldsmobile delta thermostate


You can eather get back to us with the engine size or fallow the upper radiator hose back to the engine block. The thermostat will be under the housing the upper radiator hose attaches to.

Jan 08, 2011 | 1988 Oldsmobile Delta 88

1 Answer

Fire order for a 1988 delta 88 oldsmobile


There are two different ignition systems for that year, depending on if it is a VIN "C" or VIN "3". Here is the firing order diagrams for both systems.


1988 Oldsmobile Delta 88 3.8 liter engine VIN "C"

d678f3a.jpg



Oldsmobile Delta 88 3.8 liter engine VIN "3"

41d03cd.jpg

Jul 11, 2010 | 1988 Oldsmobile Delta 88

1 Answer

Olds 1988 delta 88 changed harmonic balancer and now odd things happen. Like sometimes when you turn on headlights the windshield wipers come on. Sometimes when idling in park the mileage odometer will...


Sounds like a ground issue. Look for any ground points around the area of the engine where you were. There are several bolts that have ground wires attached on the manifold and head areas.

Jun 23, 2009 | 1988 Oldsmobile Delta 88

1 Answer

Car runs fine but bogs down under a load on the highway.


On this fine problem, you're looking at many possibilities. Only sure way, is to test things. Are you getting a SES (Service Engine Soon) light? If you do, start there, run the code and see what it is. If not, possible things could be, your spark plugs are old and cannot burn the fuel, you pretty much have a misfire, fuel injector(s) are dirty. Many things really. My car had that problem, and turned out I had a bent intake valve, so like I said, could be many things.

Jun 04, 2009 | 1988 Oldsmobile Delta 88

1 Answer

1988 delta 88 wont start


It sounds like your iginition switch is faulty. Could be time for a new switch

Dec 31, 2008 | 1988 Oldsmobile Delta 88

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...