Question about 2006 Chrysler Town & Country
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: turn signals
Hello I hope I can help with your turnsignals,Your replacement bulb should be number#3057 1.Raise the tailgate.2.Look on the sides where the tail-light is you should see two push in type bolts(fasteners)remove these by prying under the fastener with a large flat srewdriver,they will come out.3.Once those are removed,carefully pull out the whole tail-light lense.On the back you'll see two bulb socket's with tab's on them.Squeeze the tab's and carefully remove the socket,now remove the old bulb then carefully push in the new one.Hope this will take care of your problem be safe and happy out there. Tim
Posted on Oct 08, 2008
the pivot pin must be rusted to the point it does not want to move, try lubing it with wd40 or equivalent lube,at the bottom of the wiper arm just before the bolt that holds it to the car is the pivot point.that's where it has to be lubed.
Posted on Jan 18, 2010
Testimonial: " Thank you for the information. Will give it a try."
I have a 2005 Chrysler T&C. The turn signal would not work at all or activate incorrect side. The switch is easy to remove as described by dukecityman.
Once the switch is of, it has four screws holding it together.I took this apart to find that there was a circuit-board which was contaminated with dirt. wiped it of, put it back together, working fine.
If you take it apart use caution. there are parts on the "top" which will fall out. ( they go right back in) The circuit-board is on the "bottom" half. You really only need to take this part off. (less moving parts)
Your going to replace it anyway, whats the harm?
Posted on Jan 28, 2010
remove tire remove center pin and nut if needed and any othe bolts then pull straight off. Make sure parking brake is released or drum will not come off.
Posted on Apr 16, 2010
Depends on how baddly the whole car is bent and how much you pay your self. You can do it, and if it's bent bad enought that you can't expect to pay mor than flat rate anyway because thier not just changing the bumper cover and or the bumper core and or the bumper core supports and or painting the new bumper cover and or replacing or straightening the care and even pulling the frame.. Most body shops and dealers will estimate this job but they have to see it because of the stroy I just told. They most often estimate for free as your insureance companies adjuster wight also. They may even come to your work or home to see the problem. If you want to keep the insurance man out of the loop then go to an auto parts store that sells auto paint and supplies. They'll tellyou about their customers and what to expect from them. and you'll hear alot of different prices, including look good or look good and be good and strong, all the prices wil be different.
Posted on Jul 19, 2010
Tips for a great answer:
Jan 14, 2016 | Chrysler Cars & Trucks
Feb 06, 2014 | 2006 Chrysler Town & Country
Jan 28, 2011 | 2005 Chrysler Town & Country
Apr 22, 2010 | Chrysler Town and Country Cars & Trucks
Oct 10, 2009 | 2006 Chrysler Town & Country
Feb 14, 2009 | 2003 Chrysler Town & Country
Jan 09, 2009 | 2006 Chrysler Town & Country
Oct 08, 2008 | 2006 Chrysler Town & Country
68 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: