Question about 2005 Chrysler Crossfire

Open Question

How do I reset the service indicator on my 2005 chrysler crossfire after and oil change

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: How to change air conditioning filter chrysler crossfire 2005

I found a chrysler blog. Pull back carpet on passenger foot well, remove white styrofoam computer protector. Remove cardboard cover (remove two screws) from bottom of glove box. On Left side see a slot with plastic cover and two sliding latches. Open and remove and replace filter. Follow reverse to finish up. It is tight fit and hard to get to for normal sized man.

Posted on Nov 23, 2008

onyeredson
  • 404 Answers

SOURCE: Resetting Oil Service indicator lights on 1995 e300d mercedes

Hi Mike,
I'm in the U.K. and your Quarts are of a different measure to ours, I would say that is about the right amount, however careful topping up on level ground and monitoring the dip stick should get you there? anyhow where you bought the oil will have capacity details.
As for oil service light have you tried holding down the trip reset button whilst turning on ignition? Keep it pressed for about 10/15 seconds.
Good Luck!
Press the Blue button please if helped by my FREE Effort, Thank You!
Paul 'W' U.K.

Posted on Feb 09, 2009

jagjeffery
  • 318 Answers

SOURCE: BMW528i 1999-How do you reset oil service light after oil change?

With the key in the ignition but in the off postion press and hold your odometer trip button in then turn your key to the first postion hold the trip button in for 5 seconds the display will read oil service or inspection then it will say reset release the button and then press it again untill the reset starts to flash then release and press the button briefly to reset

Posted on May 28, 2009

RixsFixes
  • 2200 Answers

SOURCE: I have a 2003 BMW X5, how do I reset the service indicator?

Hi,

You can reset your service indicator, as follows:

  1. Get in the car, close the door, buckle the seatbelt.
  2. Push in the clutch pedal and hold it to the floor
  3. Press the left hand dash button (the one that resets your odometer) and hold it down
  4. Put the ignition key in the key slot, and turn it gently (very gently) until the dashboard lights come on - the key will not click - if it clicks you've gone too far and you have to start again. Hold the key in this position. In five seconds or so, the dash will display "SIA" and some other characters. Do not proceed until this happens.
  5. Release the dash button (and only the dashboard button) and then press and hold it again. In another 5 seconds or so the display should begin to flash "RESET?" Do not proceed until this happens.
  6. Release the dash button and push it again to confirm. You won't need to hold it - the display should change immediately and your service indicator will display five green LED's.
Hope this helps. Please remember to rate this answer. Many Thanks.

Posted on Jul 29, 2009

ZJLimited
  • 17970 Answers

SOURCE: How to reset the oil service meter-2005 Land Rover LR3

Service light reset – Land Rover PDF File

I hope helps with this (remember rated this help).

Posted on Dec 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil light is still on after the oil change and reset the mile


Is it the red warning light for low oil pressure ?

Mar 05, 2013 | 2005 Chrysler Crossfire

1 Answer

What is the best oil for a 2005 chrsler crossfire


there is only one oil you should use - Mobil1 0W 40 full synthetic

Aug 30, 2011 | 2005 Chrysler Crossfire

2 Answers

2005 Chrysler Crossfire Can too much oil and resulting HIGH OIL PRESSURE indication result in a ''bad oxygen sensor'' reading on the diagnostics?


yes cos the engine is blowing oil out of the exhaust manifold onto the lambda probe(oxygen sensor)which
is reading unburnt fuel/sensor fault.drain oil ASAP.

Apr 06, 2010 | 2005 Chrysler Crossfire

2 Answers

2004 chrysler crossfire resetting service light


Disconnect negative battery post for 30 seconds & reconnect. This action will reset the car's computor & remove the light.

Jan 07, 2010 | 2004 Chrysler Crossfire

2 Answers

125 miles to service says the computer, what does this indicate? what part will need service? on my 2005 Chrysler Pacifica 3.5L V6 Touring?


this is telling you that the vehicle is due for minor service such as oil change and filters if you have already done this recently the service light needs to be reset for the new cycle generally a cycle is anywhere from 3000-5000 miles depending on manufacturer. take to dealer and have them reset it or your owners manual will walk you through resetting

Aug 27, 2009 | Chrysler Pacifica Cars & Trucks

1 Answer

Low fluid indicator light is on. Check fluid and


well it is the fact that air got in to the sensor and the liquid needs to enter a little hole in sensor if the overflow stays full for so many key cycles it will reset itself good luck hope this helps

Aug 14, 2009 | 2005 Chrysler Crossfire

1 Answer

An alert signal. a - 13 with a picture of a rench blinking?


Thats the oil change reminder light. To reset this (U have to be fast doing this) turn the ignition on engine off. Press the left trip button on the odometer cluster 3 times quickly 3rd time hold it turn the key off then on with the button still pressed until the service reminder resets. Hope this helps.

Aug 10, 2009 | 2005 Chrysler Crossfire

Not finding what you are looking for?
2005 Chrysler Crossfire Logo

Related Topics:

590 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...