Question about 2003 Mercury Grand Marquis

1 Answer

#1 Where is the fuel filter? #2 Where is the automatic headlamp module? #3 My cruise control has been getting harder and harder to actuate... what is the most likely component failure.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

Fuel filter is on frame in the rear, need small tool to disconnect. lighting control module is black box under steering column on a bracket.

the buttons on the cruise get corroded with lack of use, by switching back/forth while not in use, you will eventually clean a patch and it will work better. you can also remove it, and use circuit cleaner (also works on window switches) you need to be good at tinkering to do this. the switches are available new from ford.

Posted on Sep 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

99 Corvette Headlights open and close for no reason When I'm driving down the road they will just pop up and a little while later close. Then I hear what might be a motor, Any suggestions? Thanks, Don


Could be the switch going bad or a short in a wire. If it had ever been in a accident that is where i would look for a broken or smashed wire.

Sep 30, 2017 | Cars & Trucks

1 Answer

Por favor, necesito diagrama de caja de fusibles para Mazda B2300 del 2001


Mazda B-Series (2001) - fuse box diagram Year of production: 2001

Interior fuse panel

Mazda B-Series - fuse box -
interior fuse panel Number Ampere rating [A] Description 1 5 Power Mirror 2 10 Blower Motor Relay, Air Bag Diagnostic Monitor, Passive Deactivation (PAD) Module 3 7,5 Trailer Tow Connector (LH Stop/Turn) 5 10 4×4 Control Module 7 7,5 Trailer Tow Connector (LH Stop/Turn) 9 7,5 Stoplamp Switch 10 7,5 Cruise Control Servo/Amplifier Assy., GEM/CTM, Shift Lock Actuator, Blend Door Actuator, A/C Heater Control Assy., Turn Signals 11 7,5 Instrument Cluster, Main Light Switch, RABS Resistor 13 20 Brake Pedal Position Switch 14 20 RABS Module 10 4WABS Mod., 4WABS Main Relay 16 30 W/W Motor, Wiper Hi-Lo Relay, Wiper Run/Park Relay, Washer Pump Relay 17 25 Cigar Lighter, Data Link Connector (DLC) 19 25 PCM Power Diode, Ignition, PATS 20 7,5 GEM/CTM, Radio 21 20 Flasher 22 20 Auxiliary Power Point 24 7,5 Clutch Pedal Position (CPP) Switch, Starter Interrupt Relay 26 10 Battery Saver Relay, 4×4 Electronic Shift Relay, Interior Lamp Relay, 4×4 Elec. Shift Control Module, Dome/Map Lamp, Instrument Illumination Dimming Module, Restraint Control Module, GEM/CTM, Instrument Cluster 28 7,5 GEM/CTM System, Radio 29 15 Radio 33 15 Headlights, DRL Module, Instrument Cluster 35 15 ISA Horn Relay if not Equipped with Truck Security Module

Engine compartment fuse block

Mazda B-Series - fuse box -
engine compartment Number Ampere rating [A] Description 1 50 I/P Fuse Panel 6 50 ABS Pump Motor 7 30 Powertrain Control Module 8 20 Power Door Locks and Remote Entry 11 50 Starter Relay Ignition Switch 12 10 PCM Memory 13 20 4×4 Motor 16 40 Blower Motor 21 10 PCM Memory 23 20 Fuel Pump Motor 24 30 Headlights 25 10 A/C Clurtch 28 30 4WABS Module 30 15 Trailer Tow 31 20 Fog Lamps, Day Time Running Lamps (DRL) 33 15 Park Lamp 38 10 Left Headlamp Low Beam 41 - Heated Oxygen Sensors 42 10 Right Headlamp Low Beam 45A - Wiper High/Low 45B - Wiper Park/Run 46A 46B - Front Washer Pump 47A 48A - Fog Lamp 48B - Fog Lamp Relay 49 - Full Starter 50A 50B - Fuel Pump 53 - Powertrain Control Module (PCM) Diode 54 - Powertrain Control Module (PCM) Diode 55 - Blower 56A - A/C Clutch Solenoid 56B - Trailer Tow

Jul 04, 2017 | Mazda Cars & Trucks

1 Answer

Y need book for fuse box


Fuses are listed here
* = maxi fuse
1*=50A I/P fuse panel
2*=40A blower motor relay
3*= 50A 4 wheel ABS module
4*=20a Main light switch-Instrument cluster
5*=50A Ignition switch, starter relay
6*=20A Transfer case relay
7*= NOT USED
8*=20A Auto Ride Control Switch/on off switch
9*=40A Auto Ride Control relay
10*=30A PCM power relay
mini fuses
1=10A A/C relay
2=20A Aux power point
3= not used
4=15A Fog lamps-Daytime lamps
5=10A Air Bag diagnostic monitor
6=10A Powertrain Control Module (PCM)
7=30A 4WABS module
8=30A PCM relay
9=20A Fuel Pump relay and RAP module
10= 15A Horn relay
11=15A Park Lamp relay-Main Light Switch
12=30A Main light switch--Multi Function switch
13=15A Heated O2 sensors, EGR Vacuum Regulator, EVR solenoid,Camshaft position (CMP) Sensor,
Cannister Vent Solenoid, A4LD Auto Transmission
14=30A Generator-Voltage regulator
Interior fuse panel (mini fuses)
1=7.5A Power mirror switch
2=7.5A Blower motor relay,PAD module,Air Bag diagnostic monitor
3=7.5A Trailer tow connector
4=10A Left headlamp
5=10A Data link connector (DLC)
6=7.5A Air bag diagnostic monitor, Blower motor relay, Passive deactivation Module (PAD)
7=7.5A Trailer Tow connector
8=10A Right headlamp, Daytime running lamps (DRL) module, Foglight relay
9=7.5A Stop Lamp switch
10= 7.5A Speed control-amplifier assembly,Brake pressure switch, Generic electronoc Module (GEM)
Shift lock actuator, Blend door actuator, Main light switch, RABS resistor, A/C heater assembly
Flasher
11= 7.5A Instrument cluster, Main light switch, RABS resistor
12= 10A Power window relay, Washer pump relay
13= 20A Stop lamp switch, Brake pressure switch
14= 20A Rear Anti Lock Brake system (RABS) module
**10A 4WABS module**
15=7.5A Instrument cluster
16= 30A Windshield wiper Motor, Wiper Hi-lo relay, wiper run/park relay
17=7.5A Cig lighter
18=15A Drivers unlock relay-All unlock relay
19=25A PCM power diode
20=7.5A RAP module GEM module, Radio
21=15A Flasher (hazard)
22=20A Aux power socket
23=15A Turn signals
24===not used
25= 7.5A GEM module, Instrument cluster
26= 10A Battery saver relay, Electronic Shift relay, Interior lamp relay
Power window relay,Electronic shift control module, transmission control
27=15A Switch,DRL, Backup lamp switch, DTR sensor,Instrument illumination dimming control module
Dome/map lamp, GEM,electronic shift,Interior lights,Glove box lamp and switch
28=7.5A GEM module-Radio
29= 15A Radio
30=15A Park lamps, trailer Tow relay
31===not used
32=10A rear blower
33=15A Headlamps, DRL module, Instrument cluster
34=7.5A Rear integrated control panel, CD
35=10A RABS test connector
36=7.5A CD, rear integrated control panel, memory seat,

i copied this off another post hope this helps

Oct 09, 2016 | 2003 Ford Explorer

1 Answer

What is wrong 2007 HHR cruise cntrl and auto door lock function stopped working at the same time ?


Automatic Door Lock Operation
This BCM controlled feature can be personalized to driver preference.
The BCM will automatically lock the vehicle doors if the following conditions exist:
• All vehicles doors are closed.
• The ignition is in the ON position.
• The vehicle is shifted out of PARK.
The BCM will then unlock the doors when the ignition is placed in the OFF position. The body control module (BCM) monitors the signal circuit of the cruise control switches. The BCM relays the cruise control switch status to the engine control module (ECM) via the GMLAN serial data circuit. The ECM uses the status of the cruise control switch to determine when to capture and maintain the vehicle speed. The ECM monitors the vehicle speed signal circuit in order to determine and the desired vehicle speed. The ECM uses the throttle actuator control (TAC) motor in order to maintain the vehicle speed. For further information on the TAC system, refer to Throttle Actuator Control (TAC) System Description for the 2.2L (L61) engine or to Throttle Actuator Control (TAC) System Description for the 2.4L engine. Ignition voltage is supplied to the cruise control switch from the 2-amp EPS fuse located in the integrated BCM fuse block.
You should have the BCM checked for DTC'S

Jan 22, 2016 | Cars & Trucks

4 Answers

It will not accelerate. I push on the gas and it won't go. I changed the oil a week ago and about a year ago i changed the fuel pump


Well an oil change is probably not the cause.
What IS it doing? You're telling me what it isn't doing...
Does the motor rev up?

Jun 10, 2015 | 2002 Chevrolet Tahoe

1 Answer

Fuse for the alarm system


Here is the full list of fuses for you! and for the car.

Fuses on E-box, on left in Engine Compartment

Fuse 1 - Not assigned

Fuse 2 - 10/15A - Engine control unit

Fuse 3 - 5A - Radiator fan control unit

Fuse 4 - 5/10/15A - Lambda probe heater,
Lambda probe 1 heater after
catalytic converter

Fuse 5 - 10A, 20A - Lambda probe heater1,
Lambda probe 1 heater after
catalytic converter,
Fuel system diagnostic pump,
Charge pressure control solenoid
valve,
Exhaust gas recirculation cooler
change-over valve,
Crankcase breather heater element,
Vacuum pump for brakes

Fuse 6 - 5A, 10A,15A - Fuel system diagnostic pump,
Throttle valve module,
Activated charcoal filter system
solenoid valve 1,
Continued coolant circulation pump,
Auxiliary air heater heating element

Fuse 7 - 20A, 5A - Ignition transformer,
Fuel pressure regulating valve,
Fuel metering valve

Fuse 8 - 10A - Throttle valve module,
Activated charcoal filter system
solenoid valve 1

Fuse 9 - 5A - Automatic glow period control unit,
Electric fuel pump 2 relay,
Fuel pump relay

Fuse 10 - 5A - Speedometer sender,
Brake light switch

Fuse 11 - Not assigned

Fuse 12 - 5A - Coolant circulation pump

Fuse 13 - 5A - Water pump

Fuse 14 - 5A - Engine control unit

Fuse 15 - 30A - Voltage stabiliser

Fuse 16 - 30A - ABS control unit

Fuse 17 - 30A - Automatic gearbox control unit

Fuse 18 - 20A - Automatic gearbox control unit

Fuse 19 - 1A - Onboard supply control unit

Fuse 20 - 30A - Onboard supply control unit (AW0)
Automatic intermittent wash and
wipe relay (AW1)

Fuse 21 - 50A - Secondary air pump motor

Fuse 22 - Not assigned

Fuse 23 - 40A - ABS control unit

Fuse 24 - 50A - Trailer detector control unit

Fuse 25 - 50A - Terminal 15 voltage supply relay 2

Fuse 26 - 60A - Automatic glow period control unit

Fuse 27 - 60A - Radiator fan

Fuse 28 - 40A - Onboard supply control unit (AW1)

Fuse 29 - 40A - Onboard supply control unit (AW1)

Fuse 30 - 50A - Terminal 75 voltage supply relay 1

Fuse 31 - 30A - Amplifier

Fuse 32 - Not assigned

**************************************************

Fuse assignment - Interior Fuse Panel

Fuse 1 - Not used

Fuse 2 - 5A - Electronic steering column lock control module

Fuse 3 - 10A - Instrument cluster control module

Fuse 4 - Not used

Fuse 5 - Not used

Fuse 6 - 10A - Vehicle electrical system control module,
Interior ceiling lights,
Tail lights

Fuse 7 - 5A - Fog lamp relay,
Instrument panel and switch illumination dimmer switch,
License plate lamps,
Vehicle electrical system control module

Fuse 8 - 7.5A - Windshield and headlamp washer pump switch,
Windshield washer pump

Fuse 9 - 5A - Airbag control module

Fuse 10 - 10A - Right steering column switch

Fuse 11 - Not used

Fuse 12 - Not used

Fuse 13 - 5A - Automatic dimming interior rearview mirror,
Light recognition sensor,
Parking aid control module,
Air quality sensor,
High pressure sensor,
Climatronic control unit,
Tire pressure monitoring button,
Back-up lamp switch,
Left washer nozzle heater,
Right washer nozzle heater,
28-pin connector

Fuse 14 4- 10A - Left steering column switch,
ABS control module,
Light switch,
Airbag spiral spring/return spring with slip ring,
Fuel pump control module,
Data bus on board diagnostic interface

Fuse 15 - 10A - 16-pin connector (diagnostic connector),
Instrument panel and switch illumination dimmer switch,
Headlamp range control adjuster,
Auxiliary heater operation relay,
Mass airflow sensor,
Positive crankcase ventilation heating element,
Left front headlamp,
Left headlamp beam adjustment motor,
Right front headlamp,
Right headlamp beam adjustment motor,

Fuse 16 - 10A - Engine control module

Fuse 17 - Not used

Fuse 18 - 15A - Left front headlamp

Fuse 19 - 15A - Right front headlamp

Fuse 20 - 10A - Automatic transmission control module,
Selector lever sensor system control module,
Tiptronic switch,
Climatronic control unit,
Ignition/starter switch

Fuse 21 - Not used

Fuse 22 - 10A - Ignition/starter switch,
Converter box,
Alarm horn,
Interior monitoring sensor,
Alarm horn relay,
Dual tone horn relay

Fuse 23 - 10A - Vehicle electrical system control module,
16-pin connector (diagnostic connector),
Light switch,
Rain/light recognition sensor,
Compass magnetic field sensor,

Fuse 24 - 10A - Vehicle electrical system control module,
Access/start authorization control module

Fuse 25 - 15A - Automatic transmission control module,
Selector lever sensor system control module,
Multifunction transmission range switch

Fuse 26 - 15A - Brake system vacuum pump

Fuse 27 - Not used

Fuse 28 - 40A - Auxiliary heater operation relay

Fuse 29 - 1A - Vehicle electrical system control module,

Fuse 30 - 20A - Cigarette lighter,
12 V socket,
12 V socket 2,
Blocking diode

Fuse 31 - 30A - Light switch

Fuse 32 - 20A - Light switch

Fuse 33 - 40A - Heater/heat output switch,
Fresh air blower relay,
A/C control module,
Fresh air blower switch

Fuse 34 - 15A - Left front headlamp,
Left front headlamp,
Instrument cluster control module

Fuse 35 - 10A - Steering column electronics control module,
Instrument cluster control module,
Signal horn activation,
Data bus on board diagnostic interface

Fuse 36 - 25A - Vehicle electrical system control module

Fuse 37 - 15A - Left front headlamp DRL

Fuse 38 - 15A - Right front headlamp DRL

Fuse 39 - 15A - Low beam relay

Fuse 40 - 15A - Towing recognition control module

Fuse 41 - 15A - Towing recognition control module

Fuse 42 - 20A - Towing recognition control module

Fuse 43 - 30A - Front passenger door control module

Fuse 44 - A25 - Rear window defogger relay,
Vehicle electrical system control module

Fuse 45 - 30A - Driver door control module,
Front passenger door control module

Fuse 46 - 30A - Left rear door control module,
Right rear door control module

Fuse 47 - 15A - Fuel pump control module,
Fuel pump relay,
Fuel primer relay

Fuse 48 - 20A - Vehicle electrical system control module,
Vehicle electrical system control module,
Vehicle electrical system control module,

Fuse 49 - 20A - Climatronic control unit,
A/C control module

Fuse 50 - 30A - Front seat heating control module

Fuse 51 - 30A - Power sunroof control module

Fuse 52 - 20A - Dual tone horn relay

Fuse 53 - 15A - Front seat heating control module

Fuse 54 - 15A - Fog lamp relay

Fuse 55 - 20A - Light switch,
Left steering column switch

Fuse 56 - Not used

Fuse 57 - 15A - Radio,
Radio/navigation display unit control module

Fuse 58 - 1A, 30A - Telephone transceiver
DC/AC converter with socket, 12V-230V

Fuse 59 - 30A - Amplifier

Fuse 60 - 30A - Auxiliary heater control module


Hope this helps

--N

May 31, 2014 | 2010 Volkswagen Jetta

1 Answer

Headlight problem with my 2000 Corvette. Sometimes when I start the car both headlights pop up and turn on and the switch will not turn them off. I have to turn the engine off and turn the light swith on...


Do you know how to test automotive electrical circuits ?
When the headlamp switch is turned to the HEAD position, battery voltage is applied to the headlamp opening door actuator control module through CKT 103. The LH head lamp door opens when battery voltage is applied to the LH headlamp opening door assembly through CKT 576 and ground is applied to CKT 577. The RH headlamp door opens when battery voltage is applied to the RH headlamp opening door assembly through CKT 578 and ground is applied to CKT 579. When the headlamp switch is moved to the OFF position, battery voltage is applied to the headlamp opening door actuator control module through CKT 306. The LH headlamp door closes when battery voltage is applied to the LH headlamp opening door assembly through CKT 577 and ground is applied to CKT 576. The RH headlamp door closes when battery voltage is applied to the RH headlamp opening door assembly through CKT 579 and ground is applied to CKT 578. Battery voltage is constantly applied to the headlamp opening door actuator control module from the HDLP MOT L MiniFuse® #4 (CKT 2940) and from the HDLP MOT R, MiniFuse #3 (CKT 3040). The headlamp opening door actuator control module is grounded by CKT 150 through Splice Pack #100 to G102.

Headlamp Doors Do Not Close
Install a scan tool and go to the BCM input display.
Monitor the headlamp off switch status.
Turn the headlamps on and off.
Does the scan tool indicate the headlamp off switch inactive and active?
--
YES - Go to Step 4
NO - Go to Step 6
4
Disconnect the headlamp opening door actuator control module connector C1.
Connect a DMM from connector C1 terminal D to ground.
Measure resistance to ground of circuit 150.
Is resistance within the specified values?
0-2 ohms
YES - Go to Step 5
NO - Go to Step 9
5
Connect a test light from the headlamp opening door actuator control module connector C1 terminal C to ground.
Turn the headlamp switch off.
Does the test light illuminate?

Jun 25, 2011 | 2000 Chevrolet Corvette

1 Answer

Abs fuse


Fuses are listed here

* = maxi fuse

1*=50A I/P fuse panel
2*=40A blower motor relay
3*= 50A 4 wheel ABS module
4*=20a Main light switch-Instrument cluster
5*=50A Ignition switch, starter relay

6*=20A Transfer case relay
7*= NOT USED
8*=20A Auto Ride Control Switch/on off switch
9*=40A Auto Ride Control relay
10*=30A PCM power relay

mini fuses
1=10A A/C relay
2=20A Aux power point
3= not used
4=15A Fog lamps-Daytime lamps
5=10A Air Bag diagnostic monitor
6=10A Powertrain Control Module (PCM)
7=30A 4WABS module
8=30A PCM relay
9=20A Fuel Pump2.gif relay and RAP module
10= 15A Horn relay
11=15A Park Lamp relay-Main Light Switch
12=30A Main light switch--Multi Function switch
13=15A Heated O2 sensors, EGR Vacuum Regulator, EVR solenoid,Camshaft position (CMP) Sensor,
Cannister Vent Solenoid, A4LD Auto Transmission
14=30A Generator-Voltage regulator


Interior fuse panel (mini fuses)

1=7.5A Power mirror switch
2=7.5A Blower motor relay,PAD module,Air Bag diagnostic monitor
3=7.5A Trailer tow connector
4=10A Left headlamp
5=10A Data link connector (DLC)
6=7.5A Air bag diagnostic monitor, Blower motor relay, Passive deactivation Module (PAD)
7=7.5A Trailer Tow connector
8=10A Right headlamp, Daytime running lamps (DRL) module, Foglight relay
9=7.5A Stop Lamp switch
10= 7.5A Speed control-amplifier assembly,Brake pressure switch, Generic electronoc Module (GEM)
Shift lock actuator, Blend door actuator, Main light switch, RABS resistor, A/C heater assembly
Flasher
11= 7.5A Instrument cluster, Main light switch, RABS resistor
12= 10A Power window relay, Washer pump relay
13= 20A Stop lamp switch, Brake pressure switch
14= 20A Rear Anti Lock Brake system (RABS) module
**10A 4WABS module**

15=7.5A Instrument cluster
16= 30A Windshield wiper Motor, Wiper Hi-lo relay, wiper run/park relay
17=7.5A Cig lighter
18=15A Drivers unlock relay-All unlock relay
19=25A PCM power diode
20=7.5A RAP module GEM module, Radio
21=15A Flasher (hazard)
22=20A Aux power socket
23=15A Turn signals
24===not used
25= 7.5A GEM module, Instrument cluster
26= 10A Battery saver relay, Electronic Shift relay, Interior lamp relay
Power window relay,Electronic shift control module, transmission control
27=15A Switch,DRL, Backup lamp switch, DTR sensor,Instrument illumination dimming control module
Dome/map lamp, GEM,electronic shift,Interior lights,Glove box lamp and switch
28=7.5A GEM module-Radio
29= 15A Radio
30=15A Park lamps, trailer Tow relay
31===not used
32=10A rear blower
33=15A Headlamps, DRL module, Instrument cluster
34=7.5A Rear integrated control panel, CD
35=10A RABS test connector
36=7.5A CD, rear integrated control panel, memory seat, Message center Attached images fuse%20box001.jpg?imgmax=800 __________________

Oct 29, 2009 | 2003 Ford Explorer

2 Answers

I need a fuse box diagram for a 2003 Ford Explorer Sport


I believe that this is what you are looking for.....
Fuse and relay locations--2nd generation power distribution box Layout- I think this is a good sticky candidate--

attachment.php?attachmentid=29397&d=1133918512

Fuses are listed here

* = maxi fuse

1*=50A I/P fuse panel
2*=40A blower motor relay
3*= 50A 4 wheel ABS module
4*=20a Main light switch-Instrument cluster
5*=50A Ignition switch, starter relay

6*=20A Transfer case relay
7*= NOT USED
8*=20A Auto Ride Control Switch/on off switch
9*=40A Auto Ride Control relay
10*=30A PCM power relay

mini fuses
1=10A A/C relay
2=20A Aux power point
3= not used
4=15A Fog lamps-Daytime lamps
5=10A Air Bag diagnostic monitor
6=10A Powertrain Control Module (PCM)
7=30A 4WABS module
8=30A PCM relay
9=20A Fuel Pump relay and RAP module
10= 15A Horn relay
11=15A Park Lamp relay-Main Light Switch
12=30A Main light switch--Multi Function switch
13=15A Heated O2 sensors, EGR Vacuum Regulator, EVR solenoid,Camshaft position (CMP) Sensor,
Cannister Vent Solenoid, A4LD Auto Transmission
14=30A Generator-Voltage regulator


Interior fuse panel (mini fuses)

1=7.5A Power mirror switch
2=7.5A Blower motor relay,PAD module,Air Bag diagnostic monitor
3=7.5A Trailer tow connector
4=10A Left headlamp
5=10A Data link connector (DLC)
6=7.5A Air bag diagnostic monitor, Blower motor relay, Passive deactivation Module (PAD)
7=7.5A Trailer Tow connector
8=10A Right headlamp, Daytime running lamps (DRL) module, Foglight relay
9=7.5A Stop Lamp switch
10= 7.5A Speed control-amplifier assembly,Brake pressure switch, Generic electronoc Module (GEM)
Shift lock actuator, Blend door actuator, Main light switch, RABS resistor, A/C heater assembly
Flasher
11= 7.5A Instrument cluster, Main light switch, RABS resistor
12= 10A Power window relay, Washer pump relay
13= 20A Stop lamp switch, Brake pressure switch
14= 20A Rear Anti Lock Brake system (RABS) module
**10A 4WABS module**

15=7.5A Instrument cluster
16= 30A Windshield wiper Motor, Wiper Hi-lo relay, wiper run/park relay
17=7.5A Cig lighter
18=15A Drivers unlock relay-All unlock relay
19=25A PCM power diode
20=7.5A RAP module GEM module, Radio
21=15A Flasher (hazard)
22=20A Aux power socket
23=15A Turn signals
24===not used
25= 7.5A GEM module, Instrument cluster
26= 10A Battery saver relay, Electronic Shift relay, Interior lamp relay
Power window relay,Electronic shift control module, transmission control
27=15A Switch,DRL, Backup lamp switch, DTR sensor,Instrument illumination dimming control module
Dome/map lamp, GEM,electronic shift,Interior lights,Glove box lamp and switch
28=7.5A GEM module-Radio
29= 15A Radio
30=15A Park lamps, trailer Tow relay
31===not used
32=10A rear blower
33=15A Headlamps, DRL module, Instrument cluster
34=7.5A Rear integrated control panel, CD
35=10A RABS test connector
36=7.5A CD, rear integrated control panel, memory seat, Message center Attached images fuse%20box001.jpg?imgmax=800 __________________

Oct 10, 2009 | 2003 Ford Explorer Sport

2 Answers

I don't have an extensive tool collection and even less experience with cars. But my mechanic wants $500 to replace my starter in my 2000 Toyota Sienna. 15 years ago I changed the starter in my little...


Removal & Installation
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Remove or disconnect the following:

    Battery Battery tray
  3. Remove or disconnect the cruise control actuator, if equipped, as follows:

    Actuator connector and clamp 3 bolts and the actuator with the bracket
  4. Remove or disconnect the following:

    Automatic transaxle shift control cable Engine wiring Starter electrical connectors Both bolts, shift control cable clamp and the starter

To install:
  1. Install or connect the following:

    Starter and the shift control cable clamp. Tighten the bolts to 27 ft. lbs. (37 Nm). Starter electrical connectors Engine wiring Automatic transaxle shift control cable
  2. Install or connect the following, if equipped with cruise control:

    3 bolts and the actuator with the bracket Actuator connector and clamp
  3. Install or connect the following:

    Battery tray Battery

3.0L Engine
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove or disconnect the following:

    Battery Battery tray
  3. Remove or disconnect the cruise control actuator, if equipped, as follows:

    Actuator connector and clamp 3 bolts and the actuator with the bracket
  4. Remove or disconnect the following:

    Automatic transaxle shift control cable Engine wiring Starter electrical connectors Both bolts, shift control cable clamp and the starter

To install:
  1. Install or connect the following:

    Starter and the shift control cable clamp. Tighten the bolts to 27 ft. lbs. (37 Nm). Starter electrical connectors Engine wiring Automatic transaxle shift control cable
  2. Install or connect the following, if equipped with cruise control:

    3 bolts and the actuator with the bracket Actuator connector and clamp
  3. Install or connect the following:

    Battery tray Battery

  1. Before servicing the vehicle, refer to the precautions section.
  2. Remove or disconnect the following:

    Battery Battery tray
  3. Remove or disconnect the cruise control actuator, if equipped, as follows:

    Actuator connector and clamp 3 bolts and the actuator with the bracket
  4. Remove or disconnect the following:

    Automatic transaxle shift control cable Engine wiring Starter electrical connectors Both bolts, shift control cable clamp and the starter

To install:
  1. Install or connect the following:

    Starter and the shift control cable clamp. Tighten the bolts to 27 ft. lbs. (37 Nm). Starter electrical connectors Engine wiring Automatic transaxle shift control cable
  2. Install or connect the following, if equipped with cruise control:

    3 bolts and the actuator with the bracket Actuator connector and clamp
  3. Install or connect the following:

    Battery tray Battery

3.3L Engine
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Remove the air cleaner assembly and inlet tubes.
  3. Remove the air cleaner bracket.
  4. Remove the wiring from the starter.
  5. Remove the 2 bolts and lower the starter.
  6. Installation is the reverse of removal. Torque the starter bolts to 26 ft. lbs. (37 Nm).

  1. Before servicing the vehicle, refer to the precautions section.
  2. Remove the battery and tray.
  3. Remove the air cleaner assembly and inlet tubes.
  4. Remove the air cleaner bracket.
  5. Remove the wiring from the starter.
  6. Remove the 2 bolts and lower the starter.
  7. Installation is the reverse of removal. Torque the starter bolts to 26 ft. lbs. (37 Nm).
Thanks for using FixYa - please use the preceeding instructions to determine if it within your skillset (and tooling) to replace yourself. A FixYa rating is appreciated for answering your FREE question.

Jun 21, 2009 | 2000 Toyota Sienna

Not finding what you are looking for?
2003 Mercury Grand Marquis Logo

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

fordexpert

Level 3 Expert

5537 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...