Question about 1992 Isuzu Rodeo

1 Answer

My front wheels for my 1992 isuzu rodeo are vibrating antd tilting when i turn corners

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 191 Answers

If you live near a Les Schwab then take it to them,the inspection is free, it sounds like you have ball joint that is coming apart or a tire that has separated,if you want to do it yourself then make sure the car is in park and chock the rear tires so it can't move then jack up the front end you can do one side at a time or both it's up to you just make sure to support the car on jack stands,once it is up off of the ground put one hand on the top of the tire and one on the bottom then try to make it move by pushing in at the top and pulling out at the bottom it shouldn't move then do the same thing on the side of the tire this will let you see if your tie rod ends are ok they shouldn't wiggle in there socket.Also check your tires for bulges or sharp steel belts sticking through the tread face.Hope this helps and good luck

Posted on Sep 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I NEED TO SEE A SCHEMATIC PICURE OF WHEEL BEARINGS ON THE FRONT WHEEL 4 WHEEL DRIVE OF A 1992 RODEO ISUZU


Check with local parts store they often have blowup they can print off or purchase a vehicle specific repair manual..Chilton or haynes are best.

Aug 24, 2016 | 1992 Isuzu Rodeo

1 Answer

What caused the rear wheel to fall off my 1992 Isuzu rodeo


Did just the wheel fall off or did the axle come out with the wheel attached?

Nov 02, 2013 | 1992 Isuzu Rodeo

1 Answer

Is a isuzu rodeo a front wheel drive vehichle?


The '95 Rodeo was not available in front-wheel drive, only RWD and optional 4WD:

http://www.edmunds.com/isuzu/rodeo/1995/features-specs.html

Jun 22, 2012 | Isuzu Rodeo Cars & Trucks

1 Answer

I need a digram showing me how to change the shocks on my 1999 isuzu rodeo


It is quite easy really, Remove the wheel on the corner you want to change, The back ones have one bolt at the top and one at the bottom, Simply unbolt the old one and fit the new one, The front ones are pretty much the same but they may have 2 bolts at one or both ends, Simply unbolt and fit the new ones, just make sure the replacements are bolted in tightly.

Mar 06, 2012 | 1998 Isuzu Rodeo

1 Answer

Need wiring diagram for 1992 Izuzu Rodeo 6 cyclinder.


For the 1992 Isuzu Rodeo 3.1L V6:
Firing Order
:

1-2-3-4-5-6
Cylinders:
.....(back)
5...............6
3...............4
1...............2
Distributor:
.....(back)
..............(+)-screw
.........4
..3
...................5
2
.................6
........1
(+)-screw
.....(front)
Rotation: Clockwise

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Aug 18, 2010 | 1992 Isuzu Rodeo

1 Answer

Need the firing order for a 1992 isuzu rodeo 3.1L - i read 1,2,3,4,5,6 but where is the 1 if i am looking at the enginge is is straight back on left


the firing order is 1-2-3-4-5-6 the distributer turns counter clockwise the number one cylinder is the front passanger side from front to back on pass side is 1-3-5 and driver side is 2-4-6

Dec 16, 2009 | 1992 Isuzu Rodeo

1 Answer

How do you take off a rotor on an 1992 Isuzu


you need to remove the locking hub

Sep 25, 2009 | 1992 Isuzu Rodeo

1 Answer

Front drivers side wheel is getting violent


no it wont fall apart it just keeps on tilting so better check for wleel alignment

Jan 20, 2009 | 1992 Isuzu Trooper

1 Answer

1999 Isuzu Rodeo LS, 4 wheel drive


it is probably a brake adjustment problem

Oct 18, 2008 | 1999 Isuzu Rodeo

1 Answer

Isuzu Rodeo w/3.1L engine


Front Passenger side on cap is 1 - if you look on the inside of your cap there SHOULD be a pin marked with a 1, and the plugs go CLOCKWISE not counter. Just had the same problem myself with my 91 Rodeo. Cylinders are as follows Passenger side (front to back) 1 - 3 - 5, Driver side (front to back) 2 - 4 - 6. I called the Isuzu dealer and they told me it was counter clockwise, but when I hooked it up that way it backfired through the Carb.

Jul 05, 2008 | 1992 Isuzu Rodeo

Not finding what you are looking for?
1992 Isuzu Rodeo Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...