Question about 2003 Buick LeSabre

Open Question

RIGHT FRONT FENDER IS TOTALED. HOW DO I REMOVE IT TO REPLCE WITH A NEW ONE I HAVE ALREADY PURCHASED AND PAINTED

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace front left fender on a 02 pontiac grand. Prix


Best to start by removing the wheel, then the inner plastic fender...held on with plastic push up tabs...remove all under hood fender bolts...probably 13mm...compare your replacement fender to confirm all necessary bolts to be removed, Is your new fender already painted?

Dec 26, 2014 | 2002 Pontiac Grand Prix

1 Answer

2010 Honda accord removal front left fender


Is that a question? Is it dented badly? Can you not open the door and see the bolts in the door jamb? Then others right under the hood? Then you may have some behind your fender liner. Maybe even a bolt or two under your rocker panel. You have to open you hood, your door and remove the bolts. If it doesn't feel loose, then you have more bolts. Or was this a question as to the cost of having one removed? Most costs for removal are also a cost for installation of a fender as well. Simply removing a fender and putting one back on is not very time consuming, so long as there is no damage. The cost arises when you try to put a fender back on but nothing lines up. Just to change a fender out your labor is about 75 to 100 bucks. If you need body work or paint it can be anywhere from 100 to 500 dollars. Typically, if it isn't crazy damaged you can get a brand new, after market, primer black fender for about 75 to 100 bucks and installation for about the same. With paint? Depends on the color. Red is expensive--- gold, silver, or black is cheaper. From start to finish with damage and cost of fender and paint is about 300 to 4oo bucks. I recommend you find a painted one the same color and break out your size 10mm socket and ratchet and do it yourself. Car Part com Used Auto Parts Market Use DISTANCE in your search criteria, as you dont want to have to have a fender shipped. Good luck. I hope this helped?

Oct 29, 2014 | 2010 Honda Accord

1 Answer

How to replace right front fender on a2007 replace fender 2007 chevy impala


There are four bolts and the hood hinge to remove on top. Remove the tire, remove the inner fender cover( seven or eight screws). There are two bolts to remove the fender from the front bumper cover. And one bolt to remove from inside the door( open the door, remove the cloth, the bolt is close to the top). Replace in reverse.

Oct 09, 2014 | 2007 Chevrolet Impala

1 Answer

Passenger side front fender removal


study the new fender and where there is a bolt hole then that is where you will find the bolts to remove on the old fender . They will normally be along the top inside , at the bottom near the door and around the bumper and up the panel that the door hinges are attached to

Jul 20, 2014 | 1998 Buick LeSabre

1 Answer

My 2005 Avensis sedan front windscreen washer does not work - wipers do still opperate. Where is the fuse for this located and what else could cause this problem?


PROBABLE CAUSE Impact to the front bumper pushes the bumper back far enough to break the washer pump hose fitting. CORRECTIVE ACTION Replace the windshield washer reservoir and washer motor with updated parts. REPAIR PROCEDURE 1. Turn the ignition switch to ACC (I) to unlock the steering column. 2. Raise the vehicle on a lift. 3. Remove the right front inner fender. Unhook and pull back the bumper for better access. CLIPS (6 places.) SCREWS (6 places.) RIGHT FRONT INNER FENDER 4. Release the hooks on the upper right side of the front bumper. 5. Remove the clip from the filler neck, then remove the filler neck. FILLER NECK CLIP WINDSHIELD WASHER RESERVOIR CLIP WASHER MOTOR CONNECTOR BOLT BOLTS WASHER TUBES 6. Remove the right front fender trim, and disconnect the washer hose from the 90-degree fitting. CLIP FRONT FENDER TRIM FRONT HOSE 7. Disconnect the 2P connector and the two washer tubes from the washer motor. 8. Remove the washer reservoir clip and the three bolts, then pull out the reservoir. 9. Assemble the new reservoir components, but do not install the filler neck. 10. Trim 85 mm off the end of the 1,260 mm washer tube only. 11. Route the washer tubes on the reservoir. NOTE: The black fitting is for the front windshield nozzles, and the white fitting is for the rear nozzle. 85 mm 12. Install the reservoir. 13. Connect the rear tube to the straight fitting in the wheelwell. 14. Connect the 2P connector to the washer motor. NEW RESERVOIR Connect the rear washer tube. CLIP BOLT 9.8 N•m (7.2 lb•ft) 15. Install the filler neck with the original clip. Connect the front washer tube to the 90-degree fitting. Then reinstall the front fender trim. WASHER FLUID DIPSTICK 2P CONNECTOR FRONT FENDER TRIM FILLER NECK CLIP

May 15, 2011 | Toyota Passenger Cars & Trucks

1 Answer

HOW TO CHANGE FRONT RIGHT FENDER?


Basically you remove the hood, remove front lights, then unbolt the fender from the uni-body. reverse to put the new one on.

Mar 31, 2010 | 2001 Pontiac Grand Am SE

1 Answer

How do I take off a front fender?


you don't remove the fender,
remove the right front wheel,in the front side of the inner fender there is a panel you need to remove to gainn access to the battery

Nov 23, 2009 | 1999 Dodge Intrepid

1 Answer

Need to replace passenger side front fender. I have new front fender, it is painted and ready to be installed. Are there any special problems or tools needed?


just used standard sockets with extenson, screw driver and phillips, remove head light and fender and fender guard cover. helper would really come in handy, so you dont scratch or drop fender.

Jul 07, 2009 | 2000 Ford Taurus

1 Answer

INSTALLING A NEW WATER PUMP



REMOVAL
  1. Drain Cooling System.
  2. Remove accessory drive belt.
  3. Remove right front lower fender shield.
  4. Remove water pump pulley bolts and remove pulley.
    1. Remove water pump mounting screws. Remove water pump.
    2. Remove and discard O-ring seal.
    3. Clean O-ring groove and O-ring surfaces on pump and chain case cover. Take care not to scratch or gouge sealing surface.
    INSTALLATION
    1. Install new O-ring into groove.
    2. Install water pump to chain case cover. Tighten screws to 12 Nm (105 inch lbs.) .
    3. Rotate pump by hand to check for freedom of movement.
    4. Position pulley on pump. Install screws and tighten to 30 Nm (250 inch lbs.) .
    5. Install accessory drive belt.
    6. Install right front lower fender shield.
    7. Refill Cooling System.

Jul 03, 2009 | 2000 Dodge Caravan

1 Answer

Replacing the Right Front Fender on a 1999 Mazda 626


Can you remove the wheel well splash shield and get access to the bolts? Body shop techs have a special tool to get into this area.

Here's a 97 Probe whcih was the same as a 626 in 1997:

Fender, Front Removal
  1. On GT models, remove the side sill extension. Refer to Section 01-08 for the removal and installation procedure.
  1. Remove the front fender bolt located in the door jamb opening.


    RH Side Shown, LH Side Similar


    b7b1239.gif

  1. Remove the three upper front fender bolts located on top of the front fender (16005) inside the engine compartment.
  1. Raise and support the vehicle.
  1. Remove the wheel (1007).
  1. Remove one push pin and five front fender splash shield bolts and remove the front fender splash shield (16102).
  1. Remove the upper front fender brace screw.
  1. Remove the inner front fender bolt.
  1. Remove the screw holding the front bumper cover (17D957) to the front fender.
  1. Remove the two lower front fender bolts.
  1. Remove the front fender.
Installation
To install, reverse the removal procedure. Tighten the front fender bolts to 7-9 Nm (61-86 lb-in).

Feb 24, 2009 | 1999 Mazda 626

Not finding what you are looking for?
2003 Buick LeSabre Logo

Related Topics:

360 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...