Question about 2002 Chrysler PT Cruiser

3 Answers

My PT Cruiser remote have no Panic Button How I programme another one

Posted by on

  • khalid50 Sep 02, 2010

    Please read my original request, I want to programme a remote fob from a functional fob, I do not want a spare key I have these. Most of the latest PT Cruiser remote fobs have three buttons including the panic button,however 2001 PT cruiser remote have only two button without Panic button.


    All the instructions on the internet for programming spare fob talk of press panic button?.


    Regards


    Khalid

  • khalid50 Sep 02, 2010

    Please read my original request, I didn't ask for spare keys I requested programming spare remote fobs (Transmitters) the manual you sent me is 2003 and for programming FOB, s it instructs to press PANIC button, which the 2001 model does not have, I have the manual for this model but it does not give instructions for self programming?
    Khalid

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 17,970 Answers

According to the 2003 Owners Manual:

You can program new keys to the system if you have two valid sentry keys by doing the following:
1. Cut the additional Sentry Key Transponder blank to match the ignition switch lock cylinder key code.
2. Insert the first valid key into the ignition switch and turn the ignition switch ON for at least 3 seconds but no longer than 15 seconds. Turn the ignition switch OFF and remove the first key.
3. Insert the second valid key and turn the ignition switch ON within 15 seconds. After ten seconds a chime will sound and the Theft Alarm Light will begin to flash. Turn the ignition switch OFF and remove the second key.
4. Insert a blank Sentry Key into the ignition switch and turn the ignition switch ON within 60 seconds. After 10 seconds a single chime with sound. The Theft Alarm Light will stop flashing, turn on for 3 seconds; then turn off.

The new Sentry Key has been programmed. Repeat this process to program up to a total of 8 keys."

Without 2 valid keys, it is back to the dealer for them to reprogram.

Also, could check the Chrysler PT Cruiser Sedan - Convertible Owners Manual (page 17)

Hope helps.

Posted on Sep 02, 2010

Testimonial: "Read the problem please, Remote programming and not key programming. It is so frustrating to get a solution which has no bearing to the problem. I wi"

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi
I have the same problem. I have a 2004 PT Cruiser in Australia and they do not have a panic button. If I find an answer I will let you know.

Posted on Dec 08, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,197 Answers

On the link below will tell you how to program the remote.

http://www.ptcruiserlinks.com/forum/tech-performance-forum/16957-new-remote-programming.html

Good Luck

Posted on Sep 02, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 11800 Answers

SOURCE: MY PT Cruiser Functional transmitter

If you don't have the Panic button then sorry, you can't program yourself, the dealer will have to program it to the RKE (Remote Keyless Entry) module in the vehicle, using their DRB scan tool.

Posted on Sep 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alarm goes off on it's own....how does one shut it off if it's not set off by the panic button on the key remote?


I had same problem kept hitting panic button several times and it eventually shut off. Never found out why alarm started on it own.

Nov 03, 2015 | 2003 Chrysler PT Cruiser

1 Answer

My 2004 pt cruiser shut off and will not even try to start. Shut the car up and came back next day and the alarm will not stop sounding. What can be the cause and how can i fix these problems?


2001 PT Cruiser Cuts Out, Engine dies for no reason ...

? 2:04
www.youtube.com/watch?v=cG9qCHfBhGw
Jan 10, 2014 - Uploaded by michelle salazar
2001 PT Cruiser Cuts Out, Engine dies for no reason ... picked it up on October 18, 2013 only to have it die on me while on the interstate. After it ...

Turn off alarm on 2009 PT Cruiser - PT Cruiser Forum - PT Cruiser ...

www.ptcruiserlinks.com > ... > Sound and Security Forum
Aug 18, 2013 - 10 posts - ‎8 authors It's not an add-on alarm, it's just the factory alarm. ... then I go in to panic mode (because it's horribly embarrassing when it goes off and won't shut off) and try everything else - like pressing the lock button, ... 2004 Pt Cruiser GT Car alarm installation, operation, problems and solutions ...
8 posts
May 17, 2013
KEYLESS ENTRY stop working
8 posts
Nov 1, 2009
How to reset Security.....
9 posts
Apr 26, 2009
Programming the keyless Remote
10 posts
Mar 13, 2005
More results from www.ptcruiserlinks.com

Oct 02, 2015 | Cars & Trucks

1 Answer

How to fix a horn for a PT Cruiser?


First figure out if it's the horn or the switch. Go out and hit the panic button on your fob. Does the horn go off?OK, it's not the horn. Your problem is in the switch in the steering column. possibly the clock spring.

Aug 05, 2014 | 2004 Chrysler PT Cruiser

1 Answer

My key remote for my pt cruiser will not work


Have you tried replacing the battery in the remote?

Jan 28, 2014 | 2001 Chrysler PT Cruiser

1 Answer

How to program a fob keyless remote


ATTENTION: You MUST HAVE one working remote to add one more to the system. If you do not have one working remote right now then these instructions will not work. You will have to have a Locksmith or dealership use a computer to program the first remote for you.

1. Turn ignition to run position (as far as you can go without starting engine).
2. Using any Working remote, press the UNLOCK button for 4 to 10 seconds.
3. Within the specified 4 to 10 seconds, continue pressing the UNLOCK buton and press
the PANIC button for 1 second and release both buttons at the same time. A chime will
sound within 3 seconds to indicate that the vehicle has entered remote programming
mode.
4. Within 30 seconds of the chime, press any button on all remotes to be programmed
including previously programmed remotes. A chime will sound after each remote is
programmed.
5. Turn ignition to OFF and remove key.
6. Test all remotes.

Jun 17, 2012 | 2002 Chrysler PT Cruiser

3 Answers

MY PT Cruiser Functional transmitter and the one to be programmed both have no "PANIC" Button . How I programme the spare Fob


If you don't have the Panic button then sorry, you can't program yourself, the dealer will have to program it to the RKE (Remote Keyless Entry) module in the vehicle, using their DRB scan tool.

Sep 05, 2010 | 2001 Chrysler PT Cruiser

2 Answers

New alarm fob for pt cruiser not coded to car (correct serial numbers)


Programming
When
Remote control added or replaced. System malfunction.
How
Switch ignition ON. Press and hold lock button Fig. 1 [2] for approximately 10 seconds. Keeping lock button depressed, press and hold unlock button within 10 seconds. Programming mode activated (acoustic signal will be heard). Proceed as follows: Release lock/unlock button. Complete the following within 30 seconds: Press lock or unlock button of first remote control. Correct programming indicated by a single acoustic signal. Press lock or unlock button of second remote control. Correct programming indicated by a single acoustic signal. Repeat above procedure to program any remaining remote controls. Remote controls can also be programmed using diagnostic equipment.
NOTE: A maximum of 4 remote controls can be programmed.

Feb 03, 2010 | 2001 Chrysler PT Cruiser

1 Answer

Alarm on my PT Cruiser


Being that this is a 2008 pt cruiser, I would take it back to the dealership and let them look the car over!! Should be covered under warranty!!

Dec 07, 2008 | 2008 Chrysler Pt Cruiser

2 Answers

Key fob will not undo cetral locking or disable car alarm changed battery in key fob still having no luck any idea who can re code key fob to central locking and alarm?


If you don't have one that works for the vehicle now, you'll have to take it to your local dealer to have it programmed to the vehicle. Some will charge for this, some will do it at no charge.

If you do have a remote that is programmed and working for the vehicle, then the following steps will allow you to program another remote:

1. Enter vehicle and close all doors.

2. Put seatbelt on (or clip it into the buckle) to shut the warning buzzer off.

3. Put key in ignition, turn to run position but don't start it.

4. Press and hold the unlock button on the working key fob and hold for 4 seconds, then also press the panic button.

5. Release both buttons and you should hear a single chime to indicate it is in program mode. You have 30 seconds after the chime to program any additional remotes you want to program.

6. Press and release both the unlock and lock buttons simultaneously on the remote you are programming. You should hear another single chime.

7. Within 4 seconds after hearing the chime, press either lock or unlock button on remote that you are programming.

Oct 16, 2008 | 2001 Chrysler PT Cruiser

Not finding what you are looking for?
2002 Chrysler PT Cruiser Logo

1,738 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...