Question about Chevrolet Impala

Open Question

Routing for serpentine belt for 3900 06 impala

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

greg_margo
  • 1959 Answers

SOURCE: routing of serpentine belt for ford escort zx2

Click on the link below, Enter the year,make,model, and engine. You will get a page with a link to the diagram you need under the part number.
Greg

http://www.mvreader.com/multiview/dayco/index.php?autoCatalogSearch=0&catalog=auto&l=n&year=2000&year_from=&year_to=&make=FORD

Posted on Jun 17, 2009

bschilz
  • 2049 Answers

SOURCE: routing serpentine belt

For a v-6 3.6L follow this link...
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7031
For a v-6 3.8L follow this link...
http://www.gates.com/common/part_locator/view_diagram.cfm?id=S6024

Posted on Sep 03, 2009

greg_margo
  • 1959 Answers

SOURCE: i NEED 2005 mazda6 Serpentine Belt Routing

There are 2 engines for your Mazda 6, a 2.3 and a 3.0. Below are both diagrams:
2.3
e557cdf.jpg

3.0
c9ae9a7.jpg

Posted on Sep 08, 2009

  • 1757 Answers

SOURCE: Need serpentine belt routing diagram for 1994 Dodge grand caravan

3.3L?
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!

Posted on Jan 22, 2010

  • 47 Answers

SOURCE: 2006 Chrysler Pacifica serpentine belt routing

here are a couple diagrams...
1e7d361.jpg

011a835.jpg

If you need anything else, let me know.

Posted on Mar 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a diagram for a 2009 impala serpentine belt


look under the hood there should be a decal somewhere that shows the serpentine belt routing.

Aug 29, 2014 | 2009 Chevrolet Impala

1 Answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3


Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb

    Sep 21, 2011 | 2003 Chevrolet Impala

    2 Answers

    I need the serpentine belt diagram for a 3.8 2003 Impala.


    There should be a diagram of the belt routing under the hood somewhere. clay58_53.png

    Jul 03, 2011 | 2006 Chevrolet Impala

    1 Answer

    Serpentine Belt Diagram 2003 impala


    Serpentine belt routings can be found here:
    http://www.accessdayco.com/automotive#

    You should have one of two engines....
    The 3.8L
    zeevert_59.jpg Or the 3.4L

    zeevert_60.jpg

    Apr 06, 2011 | 2003 Chevrolet Impala

    1 Answer

    Removing a serpentine belt to change an alternator


    Easiest way is to release the tension and remove the belt from the alternator and secure it with a bungee cord to someplace that will hold it around the other pulleys. The decal showing the routing should be on the underside of the hood in case it comes off.

    Jan 17, 2010 | 2001 Chevrolet Impala

    1 Answer

    Need diagram for serpentine belt for 2004 chev impala


    For an 2004 CHEVROLET IMPALA - V6 3.8L 231ci GAS FI N K

    Belt Routing Diagram Multiple Accesories
    95d27a1.jpg

    I dont know if this is your model engine, so, in DAYCO Catalog you can find other engine too.

    I hope help you with this. Good luck ( remember rated this help).

    Oct 09, 2009 | 2004 Chevrolet Impala

    1 Answer

    I need the serpentine belt routing for my 06 chevy impala 3.9 v6. GM in there infinite wisdom (sorry finite wisdom) elected to not provide the belt routing label on the newer models.


    Hello smosa857, my name is JShreader. Thank you for choosing fixya.com.

    I uploaded the Belt Route for this 3.9L Engine in .pdf format. You can download it by clicking HERE. I hope this helps you. If you have any more questions or need any more diagrams, please don't hesitate to ask...Thanks again, JShreader!

    Mar 31, 2009 | 2006 Chevrolet Impala

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    114 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    74896 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7688 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...