At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Not to bad you need remove wheel first then remove 2 bolts from brake caliber put caliber to the side or better yet hang it on the stut spring with a zip tie then remove 2 bolts that hold the brake caliber bracket on put it to the side then remove rotor then remove the big nut on the center of the axle then get a hub puller or a cold chisel to seperate the hub from the steering knuckle oh disconnect the ABS sensor from connection.
remove the plastic engine cover, follow the top radiator hose to the engine. the piect that it is attached to is the thermostat housing. remove the two ten millimeter bolts and pull it off the thermostat and seal will be underneath, you shouldn't even have to remove the hose
×