Question about Kia Rio

1 Answer

I would like to know the PSI for a 2001 kia rio fule pump? I read about 49-50 PSI when i pressure test. cant get the to start...

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 972 Answers

The fuel pressure is ok,you will have to look at fuses/sensors etc

Posted on Sep 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2001 jeep grand Cherokee larado L6 4.0 I have a crank/no start condition I got spark and fuel pump is coming on/


the pump can make noise, good or bad.
its just a simple dc motor rotor pump.
this jeep is EFI so pressure matters not sounds.
if the pump sounds dead that is dead pump or no 12vdc power to it, voltmeter wins this battle.
why not learn first that nostarts have 50 causes.
one can guess
one can replace parts in statistical order (sorry your car never reads stats)
or one can learn to diagnose EFI. i cant teach you in this box.
sorry.
but I can put you on the correct track for sure.
1: lets pretend the ENGINE is ok , the larger list of parts bad.
2: and go for SPARK. no gas engine runs with no spark so
is like NUMBER ONE first test
GOT SPARK , my guess is you dont even know what that means.
google or youtube how to test spark, 10,000 examples for 100 years running. (car repair for dummies in the book store "?)
3: spark needs to be good on all 5 cylinders. not 1.
so most fail to do that, lazy or ? i dont know why.
this engine and this year runs a odd huge single coil rail pack
so not scanning the PCM now ,is really making the job hard.
no?
to do this correctly lacking most tools. (scanner missing)
the FSM tells you how. its free to read, why not read that now
in the offical jeep book.
what is done is the pack is racked back(unbolted )
and test spark plugs used.
if you know EFI, you know 2 things, in same book
do not short plugs. nor run them open circuited , on purpose.
so getting 6 plugs there and 6 grounds, is a daunting task.
for most persons, (not the shop its normal)
chapter 8I (8 india) in the FSM is SPARK chapter, read it now.

if the spark test passes then test fuel, test passes.
instant start spray in a can, buy it in any auto store earth.
if that works engines sounds great. then
we ATTACK fuel now.
next is fuel pressure,
just because a rail fitting shows leaks fuel test.
means nothing , it only means the pump is not 100% dead
EFI need spec pressure to run any engine,
spec
case in point, 10 PSI the engine can not run.
see?
the running fuel pressure is
49.2 psi 6 5 psi). not 10.
over 55.4psi is bad FPR
the books says, below 44.2 psi (weak pump or FPR bad)

there you go, all way to find this, (engine good)
Mr, otto cycle engines, same deal for 100 years

engine good. CAT convertor not melted.
good spark x6 (this case)
and proper fueling , not starving not flood , it starts.
THE PCM does FUEL and SPARK now from 1988 to now.

Jan 20, 2017 | Jeep Cars & Trucks

1 Answer

2001 Kia rio starts first time than will start than die u push gas acts like it gets no fuel but fuel pressure is fine tested for codes nothing


as this is an ECM related problem there will be fault codes. There are different ways to get the scanner to read for these codes so it is possible that the correct connections to the data connection were not used .

Jul 11, 2014 | Cars & Trucks

1 Answer

Cylinder #1 miss fire in 2003 kia reo stand trans changed plug, power pack, wire, mass air flow sencer don't know what else to change need help.


if ignition coil(s) wires plugs are ok, there can be a burnt exhaust valve on cylinder 1. you can test it by a compression tester. it is a simple gauge with a hose attached. check it on interet. you can make one for yourself. you will disable fuel pump by removing its fuse, and remove all spark plugs. and one will try to start car when you are reading cylnder pressure one by one.

Mar 01, 2014 | 2003 Kia Rio

1 Answer

What should the fuel pressure be for a 2003 Kia Rio


you other guys are useless, try reading the question 46-51 psi

Dec 29, 2012 | 2003 Kia Rio

1 Answer

Where is it on 2002 kia rio fuel test port don't


You would have to test the fuel pressure on this vehicle by connecting to the line coming from the fuel filter to the fuel rail, there is no actual fuel test port on this vehicle. if you do decide to test the pressure... here is what your pressure readings should be>> Fuel Line Pressure 46-51 psi (320-350 kPa)
This actually sounds like a Fuel Pressure Regulator issue. I would recommend replacing the regulator and see how the vehicle responds after that..

Hope this helps...

Sep 13, 2011 | Kia Rio5 Cars & Trucks

1 Answer

I have a 2001 Rio 145,000. It started losing power (speed) taking off , then it just died, tried starting but would not turn motor, got it home and the starter was working but the car would not...


test for fuel from fuel pump check for spark from plugs check all fuses if not getting spark replace coil pack if not getting fuel replace fuel pump

Dec 21, 2010 | 2001 Kia Rio

1 Answer

2001 kia rio fuel pump does not work


Are you positive its the fuel pump? Have you tried running the pump with the return line off to see if it pumps fuel? They don't always have to make a noise.

Also refer to www.kiatech.info

Jan 10, 2009 | 2001 Kia Rio

1 Answer

Kia rio 2001 has no current to fuel pump engine cramks ok


Try replacing or swapping fuel pump relay its in the main fuse box close to the battery

Jan 10, 2009 | 2001 Kia Rio

3 Answers

2001 kia rio


That was exactly what the the problem used to be...THANX...Guru INDEED...

Aug 11, 2008 | 2001 Kia Rio

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...