Question about 2003 Jeep Wrangler

1 Answer

I just turned past 80500 miles and the yellow engine icon lit up... is this a service reminder and how can I clear the icon? Thanks! :)

Posted by on

  • tghn1 Sep 01, 2010

    I'll give it a try. Thanks! :)

  • tghn1 Sep 01, 2010

    The code was P0122... throttle position sensor. He reset the light and it has not came back on yet. If I did need to replace the sensor would this be an easy fix that I can tackle?

    Thanks! :)

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,299 Answers

I would take it to Autozone. They will hook it up to their computer for free and tell you what the code is for the light to be on.

Posted on Sep 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Emission warnig light on


Check Engine Light
The fault codes are cleared after the problem has been rectified and the engine has been started 5-10 times.
Service Interval Reminder Lights
The on-board computer is used to evaluate mileage, average engine speed and engine and coolant temperatures as well as other computer input factors that determine maintenance intervals. There are 5 green, a yellow and a red LED used to remind the driver of oil changes and other maintenance services.
The green LED'S will be illuminated when the ignition is in the ON position and the engine OFF. There will not be as many green LED'S illuminated when the maintenance time gets closer. A yellow LED that is illuminated when the engine is running, will indicate maintenance is now due. The red LED will be illuminated when the service interval has been exceeded by approximately 1000 miles. This is the computers way of saying this is your last warning.
There is a service interval reset tool manufactured by the Assenmacher Tool Company (tool 62-1-100). This tool is used to reset BMW 6-cylinder and 4-cylinder vehicles with the aid of an additional adapter tool.
  1. Locate the diagnostic connector near the thermostat housing.
  2. Plug the special reset tool into the diagnostic connector and place the ignition switch in the ON position.
  3. Depress the reset button on the tool until all 5 green LED'S are illuminated, showing that the reset has completed.

Nov 12, 2012 | 2002 BMW 3 Series

1 Answer

Engine service light is on and all codes are cleared


hi engine service light is different from error codes, this is a system generated thing so its just reminding you that you have a service either due, or one is coming up, its on a countdown via the mileage counter, when it gets close it just reminds you to get it done, this will have to be reset in a different way here is how
  1. With the car started (ignition on), set the LCD odometer readout to total mileage(not trip A or B).
  2. Turn the car off (ignition key to the OFF position).
  3. Push in AND HOLD the button/knob that switches the odometer
  4. Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
  5. Release the odometer button/knob.
  6. Turn key to OFF position.
  7. That's it! The "MAINT REQD" light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so hope this helps, please rate and comment thanks

Feb 03, 2011 | 2001 Toyota Sienna

2 Answers

Is the yellow "service engine soon' light on my


Yes it is you need to take that to GM fast!

Dec 06, 2010 | 2000 Buick LeSabre

1 Answer

Engine oil light lit up and says Dist:3750mi


Nissan recommends changing the oil every 3750 miles. The computer is reminding you that you have driven 3860 miles without yet changing the oil.

May 14, 2010 | 2004 Nissan Murano

4 Answers

Why maint req´d driver in my car lit? what´s it the problem?


Maintenance required light is a reminder to change the oil. if you have had the oil changed within the last 3000 miles its likley the people that did the oil change didnt reset the light, if im not mistaken, to reset that light turn the car to the key on engine off position and hold the odometer button down until the light blinks and goes away

Apr 09, 2010 | 2005 Honda Civic

4 Answers

What does "service" light mean?


The service light comes on every 5000 miles to remind you to change the oil & check fluids. It is reset with a special tool that connects to the OBDII connector.

Jan 18, 2010 | 1998 Volvo S90

2 Answers

How to clear a maintenance request message from a volvo 2006 S60


can you scroll down to the mileage indicator for the oil change and re-set it again to zero miles on the oil change.....just an idea

Sep 11, 2009 | 2006 Volvo S60

2 Answers

Service reminder


You can reset it manually. Make sure the car is off, then click the ignition over to ON (do not turn over the engine). Press the INFO button until you see the service reminder (should be a wrench with 3 dashes by it). Once you see this, press and HOLD the INFO button for 3-5 seconds. The reminder should add 6 months and 5000 miles.

Oct 15, 2008 | 2008 Mitsubishi Lancer GTS CVT Sedan

3 Answers

Yellow warning light on dash


ok to turn the light off you can buy an unexpesive generic scan tool and do it your self, or take this truck to an autozone store and they will turn it off for free, but make sure to write the codes from the tool some where because if the light is coming on most likelly is goiing to come back again until you repair the problem
also when you fill your fuel tank, do it with the car off and meake sure the fuel cap is tie because that will turn the light on

May 28, 2008 | 2007 Toyota Tacoma

Not finding what you are looking for?
2003 Jeep Wrangler Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...