Question about Ford F-150

1 Answer

2001 ford f150 need to change blower and wondering where it is

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,796 Answers

Hi!!!

Here are the steps you need to follow to replace the Blower Motor

  1. If equipped, remove the aftermarket air filter.
  2. If equipped, remove the mounting bracket for the removed cover.
  3. Disconnect the push-pin retainer from the motor mounting plate.

2001 ford f150 need to - 96b2fc2.jpg
4. Disconnect the connector
5. Remove the blower motor cover.


424186b.jpg
6. Remove the three screws.
7. Pry to release the three tabs.
8. Remove the cover.

WARNINGCarefully remove the blower motor to avoid damage to the wheel.


85a4e39.jpg

10. Remove the gasket.
11. To install, reverse the removal procedure

Good luck!! Don't forget to rate this post!!

Posted on Sep 01, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
rtpflh
  • 546 Answers

SOURCE: tail light change in 2001 Ford F150 King Cab

lower tailgate.look for small 8 or 10mm bolts that hold tail light assembly in place .remove bolts,pull assembly off.there are also plastic 'pins' that align and help hold the tail light.grasp bulb socket and twist to remove.pull bulb straight out.

Posted on Sep 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the blower motor resistor?


once you find the resistor you unplug the electrical connector, then remove the two screws that fasten it to the duct work and remove resistor.

Mar 07, 2015 | 2001 Ford F150 Styleside SuperCrew

1 Answer

2001 f150 blower motor wont work


Are you getting power and ground at the blower motor ?
Are you getting power at the resistor ?

Jul 27, 2012 | Ford Cars & Trucks

1 Answer

2001 f150 ac blower motor will only blow on high


This is a symptom of the Blower motor resistor is out on the lower settings.

Easy enough to change, and I think it is still ~ 25.00 from the dealer ( or Ford dealers that sell parts online ).

Most just lay on the passenger floor to do the work, it is facing down.

This is a picture of the blower motor resistor installed, taken from the passenger floor
sscullys_153.jpg

It could be just the blower motor resistor itself or the resistor and pigtail
sscullys_154.jpg

sscullys_155.jpg

Apr 02, 2011 | 2001 Ford F150 Styleside SuperCrew

1 Answer

A/c front blower does not work when a/c is switch on


Check the voltage to the blower motor,if it has voltage,replace the blower motor.If it does not have voltage,replace the blower relay,,and check the connection on the fan switch,or control.

Apr 23, 2010 | 2001 Ford F150 Styleside SuperCrew

1 Answer

How do you change the blower moter on a ford f150


if the blower motor housing is in the engine you need to take the battery and the battery support out and you will see the screws the hold the motor in remove them and pull motor out

Oct 09, 2009 | 2004 Ford F150

1 Answer

Tail light change in 2001 Ford F150 King Cab


lower tailgate.look for small 8 or 10mm bolts that hold tail light assembly in place .remove bolts,pull assembly off.there are also plastic 'pins' that align and help hold the tail light.grasp bulb socket and twist to remove.pull bulb straight out.

Sep 22, 2009 | 2001 Ford F150 Styleside SuperCrew

1 Answer

How do you disconnect the electrical connector from the blower?


you need to change your blower motor resistor, located in the blower motor housing....

Aug 07, 2009 | 2000 Ford F150 Flareside SuperCab

1 Answer

2000 f150 blower motor


the blower motor itself....see if its gone bad

Feb 12, 2009 | 2001 Ford F150 Styleside SuperCrew

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...