Question about 1991 Honda Accord

1 Answer

The brake pedal travels to the floor and does not come back all the way,the calipers have been changed,but the problem still exists.i also bled the brakes but the problem still exists

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Sounds like you need a new master cylinder

Posted on Sep 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

Brake pedal is mushy all the way to the floor. Have already replaced front calipers, master cylinder, and bled all the brakes. Pedal still goes all the way to the floor when stopping the car.


If the car has drum brakes in the rear, Jack the rear up and have someone push the brake pedal hard and you try to turn the wheel. If you can turn it you need to adjust the rear shoes. They may be traveling out so far that the fluid level drops causing the pedal to go to the floor. You must adjust them with the drum on till you hear and feel the shoes rubbing against the drum. Hope this helps.

Dec 30, 2010 | Honda Accord Cars & Trucks

1 Answer

Changed brake pads on my 94 dodge stealth and now i can't get the brakes bled


If you have a soft brake pedal and have to push hard to slow down or pump the brakes to slow down then you probably have air in the brake lines from the last brake pad replacement. The brakes need to be bled with this method: Use 1/8 inch 2 foot long hose from parts store and attach the hose from bleeder valve ball on the brake caliper to a bottle partially filled with brake fluid. The end of the hose in the bottle must be submerged in the fluid in the bottle. With a second person holding the brake pedal to the floor, slowly turn bleeder valve counter clockwise (loosen tiny bit) with wrench and watch for dirty brake fluid to create bubbles in the bottle. When bubbles start, quickly tighten bleeder valve back to tight. Second person should lift foot, pump and then while valve is still tight should push the pedal to the floor again and THEN you again open bleeder valve slowly turning counter clockwise and watch for bubbles. Repeat until no more bubbles can be created in the bottle where the hose is submerged. Move to next caliper and repeat. For a firm brake pedal you will need to repeat this on all four calipers.

Jul 24, 2010 | 1994 Dodge Stealth

5 Answers

Brake pedal goes to the floor only when engine is running. Pedal is perfect with engine off.


your power brake booster is blown out
the seal has a leak in it
run the truck for 3 minutes and shut it off. with the windows up listen carefully while you gently apply the brakes
listen for a hissing sound of air leaking.
the sound of these leaking is a very soft sound

Mar 27, 2010 | 1998 Chevrolet K1500

3 Answers

While driving my 1994 Honda Accord the brakes went out. I can only get the car to stop if I press the brake pedal all the way down to the floor. When the car is shut off and I pump the brake pedal, I can...


There may be air in the lines. Bleed all your brakes starting at the farthest wheel from the resevoir, and finishing at the closest one. Try the pedal after its bled. If the pedal still feels soft or travels to the floor there may be a pinhole leak that may be spraying on the underbody of the car, or the seals in the master cylinder are gone filling the vacuum booster(if equipped). Air compresses more than oil so if bleeding works that may be the problem.

Feb 21, 2010 | 1994 Honda Accord

2 Answers

Spongy brake pedal even after ABS bleed and base brake bleed.


Did you adjust the rear shoes out? If the rear drum brakes are out of adjustment they will give you a lot of pedal travel. If the pads are worn have no fear of that U-CLIP brake spring, just change one shoe at a time. Take the spring off one side, change the shoe, put the spring back on the post and do the same to the other shoe, no problem.

Dec 03, 2009 | 2001 Chevrolet Venture

2 Answers

Brake pedel pushes to the floor


pump the pedal about 10 times and see if it comes back up, u need to pump the caliper pistons out after a brake job.

Jun 27, 2009 | 1997 Ford F150 Regular Cab

2 Answers

Spongy brake pedal


I have a 2001 Chevy 1500 4 X 4 that recently had all new pads, rotors, and calipers installed. Since then my brake pedal goes almost to the floor before I get any brakes. I took it back to the shop and they bled the brakes with no better results. I bled them also with no results. I took the truck back and they installed a master cylinder with no results. It's now at the Chevy dealer and they say it's normal - BS! I had good brakes before I had all of the brake parts replaced, no one can figure it out. If you have a load in the truck or if you tow anything you better be looking at the ditch to avoid an accident. The original brakes would put you nose into the windshield and now I could stop it better the Fred Flinstone way. Anyone have an answer????????

Jun 18, 2009 | 1998 Chevrolet C1500

1 Answer

1994 corolla


If the hose kinked or twisted it may be collapsed inside, I would replace it and go from there.

May 12, 2009 | 2003 Toyota Corolla

3 Answers

Just replaced master cylinder on 1990 aerostar and bled the brakes, still the pedal goes to floor and i have no brakes


Did you bench bleed the master cyl. before installing it? then when you installed the new master, did you bleed all 4 points? If yes, then check all for points for leaking caliper/s and leaking wheel cylinder/s. If the van has ABS, check the valve body for a bleeder screw and see if air bleeds out of it. If you've checked everything twice and did everything right then your new master cyl. may be defective.

Apr 29, 2009 | 1986 Ford F 250

1 Answer

Brake pedal to floor


Change the brake caliper. This should do it.

Rate this

Apr 05, 2009 | 1995 Toyota Camry

Not finding what you are looking for?
1991 Honda Accord Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...