Question about 1991 Ford F250

1 Answer

Im wondering what different transfer cases came in the 91 4x4 f250? mine has borg warner stamped on it

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 316 Answers

There were 2 Borg Warner Transfer cases in you years truck. A13-56, and a 1345; both are Borg Warner cases.

Posted on Sep 01, 2010

  • tonisguy06 Sep 01, 2010

    how do i tell the difference?

  • its420_us Sep 01, 2010

    The A13-56 was used on manual transmissions, and the 1345 was used on automatic transmissions.


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What transmission and valve body do i have in my 1999 explorer xlt

Locate the metal tag or stamp number on the case, ford is likely a Borg-Warner, shape of the oil pan can narrow your serch take a picture of it, compare to the charts online transmission websites.

Dec 31, 2016 | Cars & Trucks

1 Answer

Id trans. borg warner basic 2 casting #13-52-063-914

ok what are you looking for on the tranny if you need the numbers there is a plate on the tranny or numbers stamped on it

Jan 24, 2013 | Chevrolet Chevette Cars & Trucks

1 Answer


6 pints of Dexron or equivalent. I think Mercon V would qualify. Not Type F.

This is for both transfercases used by Ford that year. New prcess 208 and Borg Warner.

Jan 14, 2011 | Ford Bronco Cars & Trucks

2 Answers

Isuzu rodeo manual trans id

cheap truck 4cyl borg warner 6cyl mua

Jan 15, 2010 | 1991 Isuzu Rodeo

2 Answers

I have a 2000 bravada and the awd doesn't isn't working. I took to the shop I usually get work done at and they said it was working fine. I am no mechanic but when the front tires aren't moving and you are...

I'm pretty sure the computer controlled NP-136 transfer case (which uses two speed sensors to sense the difference in speed between the front output shaft and the rear output shaft, and engages the front axle accordingly) was installed in 1998 and later models.

These trucks (mine included) use an "Active On Demand" transfer case. Basically its a normal 4x4 transfer case with a big electrically actuated (by way of a motor) clutch that connects the front prop-shaft (which is being spun by the wheels full time) to the transfer case front output. Its all in the transfer case.

Good luck and hope this help, check all the fuses and the wire harness to the encoder motor and replace the encoder motor if it has gone bad. Try bring it to a transmission shop that is familiar with the AWD system on your Bravada. The earlier years were a different system, 1998 was when the change was made. 1997 and earlier use the Borg-Warner 4472, which is always engaged with the use of the viscous coupling. Both were marketed as "SmartTrak" though.

Sounds to me like the transfer case actuator motor is either faulty or it is being told to be on all the time (which it shouldn't be).

Dec 15, 2009 | 2000 Oldsmobile Bravada

1 Answer

4X4 Ranger transmission to tranny case problems

replaace transfer case or more head aches

May 26, 2009 | 1984 Ford Ranger

1 Answer


Hello rvkenneljmil: My name is Roger I can help you. You did not say what transmission you were asking about. GM used 3 different transmissions. The automatic was a 700Ra. The standard transmissions were a Borg warner and one made by Isuzu. The MW1 was made by Borg warner had a bolt up bel housing.The transmission bolts to it.The Isuzu transmission is a two piece transmission. The bell housing and one half of the transmission case are one piece. Depending on the transmission make sure you use the correct fluid in them. 90wt gear oil in the Isuzu transmission will destroy the bearings.The code numbers for the Isuzu is MG5/MY2/M50. Please rate the quality of the information you received. This is how we track that you received the answer you wanted. Thank You for using FixYa.Roger

May 07, 2009 | 1994 GMC Jimmy

Not finding what you are looking for?
1991 Ford F250 Logo

Related Topics:

346 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers


Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides