Question about Chevrolet Silverado 2500HD
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Fuel Rail Pressure Low During Power Enrichment
The engine control module (ECM) uses the fuel rail pressure (FRP) sensor to determine fuel pressure to the fuel injectors. This is then compared to the calculated target fuel pressure as determined by the ECM. The ECM adjusts the FRP by modulating the duty cycle of the control driver of the fuel pressure regulator. Injector pulse duration is determined by the measured rail pressure and the target injection fuel into each cylinder. If a sensor circuit malfunction is detected, or the commanded fuel injection pump flow is not within the proper range for a given engine load and speed, DTCs will be set.
DTC U1000 and U1255 Circuit Description Modules connected to the class 2 serial data circuit monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the modules. When a module receives a message for a critical operating parameter, the module records the identification number of the module which sent the message for State of Health monitoring. A critical operating parameter is one which, when not received, requires that the module use a default value for that parameter. When a module does not associate an identification number with at least one critical parameter within about five seconds of beginning serial data communication, DTC U1000 or U1255 is set. When more than one critical parameter does not have an identification number associated with it, the DTC will only be reported once. The class 2 serial data line on this vehicle is a ring/star configuration. The following modules communicate on the class 2 serial data line:
• The body control module (BCM) • The digital radio reciever • The driver door module (DDM) • The electronic brake control module (EBCM) • The front passenger door module (FPDM) • The HVAC control module • The inflatable restraint sensing and diagnostic module (SDM) • The instrument panel cluster (IPC) • The memory seat module (MSM) • The powertrain control module (PCM) • The radio • The radio amplifier • The rear seat audio (RSA) controller • The rear seat entertainment (RSE) assembly w/U42 • The rear wheel steering control module • The remote playback device-CD player w/U1S • The transfer case shift control module • The transmission control module (TCM) w/Allison transmission • The theft deterrent control module • The vehicle communication interface module (VCIM) w/UE1
Posted on Dec 09, 2008
Tips for a great answer:
Jul 18, 2016 | Cars & Trucks
Aug 23, 2015 | GMC Cars & Trucks
Dec 18, 2014 | 2005 Chevrolet Silverado
Nov 16, 2013 | Cars & Trucks
engine light comes on and off, these are indication that there is some
error code stored in your vehicles ECM. The engine module computer
needs to be scanned. These will give the code and as per the error code the
further problem can be detected and confirmed. The engine light
indicator blinks or remains steady on dash when engine computer
noticed any problem with any engine electrically operated components.
more help, I suggest you to refer the help links provided below. These will let
you know more about which areas to look, check, when there is engine light
coming up on dash panel.
the link below: -------
details will help.
Nov 28, 2012 | 1999 Acura CL
Feb 16, 2012 | Cars & Trucks
Jan 08, 2011 | Chevrolet Silverado 2500HD Cars & Trucks
Sep 30, 2009 | 2007 Chevrolet Silverado 2500HD
Jun 29, 2009 | Chevrolet Silverado 2500HD Cars & Trucks
54 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: