Question about 1994 Jeep Cherokee

1 Answer

How do you install the drivers side window in a 1994 Jeep Cherokee Sport? Already removed interior door panel, bottom window molding, and screw & washer from regulator, Can't understand how to get the new window into the tracks.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Most door glass slides in from the top **** in the door. Sometimes the window seal around the window frame may have to come out and can be re-installed after you secure the glass to the track. You may have to insert the glass at an odd angle to fit it thru. Be sure to have the door panel off so you can access the track screws(bolts) and make sure you do or don't have to bond it with adhisive. A great bonding agent for this is gorilla glue, tested and still working on my friends 93grand cherokee. Good luck.

Posted on Sep 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the driver side door panel on a 1994 Lincoln Mark VIII


Remove mirror mount cover assembly.
Remove inside door handle cup (22634).
Remove door lock control bezel.
Remove window control bezel.
Remove interior lamp lens.
Remove screw from interior lamp assembly body.
Remove screw from window control bezel opening.
Disconnect mirror, lock switches and memory seat on driver side from bezels and wire harness.
Disconnect window switches from window bezel and wire harness.
Lift front door trim panel (23942) vertically, out of weatherstrip and over lock rod.
Disconnect interior lamp (13776) from wire harness.
Remove front and rear door trim retention hooks into door inner panel.
To install, reverse Removal procedure, paying special attention when inserting inner door trim into weatherstrip. Rock inner door trim into weatherstrip and push downward until lower trim belt character ditch lines up with score mark on inner door panel.

Aug 16, 2014 | 1994 Lincoln Mark VIII

1 Answer

Thow to take off door pannel and install passenger side window motor on 2000 jeep grand cherokee


first you have to remove dead plugs on door handle and remove screws another screw on door opening handle and you have to disconnect 2 metal pins behind that and look all around the door panel sides and under should have several rivets make sure no any screw and rivets left on door panel pull door panel foward and pull it up dont go too hard dont damage door panel conections for proper reinstallation. before removing door panel from the door dont forget disconnect cable connections from window and door lock switches.good luck

May 07, 2011 | 2000 Jeep Cherokee

1 Answer

Remove/replacing side view mirror on a jeep grand cherokee


    Remove the Old Mirror
  1. Step 1 Disconnect the negative battery cable before you take off the grand Cherokee front door trim panel. Remove all screws and clips.
  2. Step 2 Detachthe window trim cover screw, and control lever screw beforedisconnecting the entire mirror trim cover. Remove the rubber coverinside the mirror cover, and disconnect the electrical wire.
  3. Step 3 Remove three nuts from the power mirror using a Torx® star-shaped screwdriver.
  4. Step 4 Pull out the outside rear view mirror. Guide the power wire through the hole in the door.
  5. Install the New Mirror
  6. Step 1 Replace the old mirror. Put the new power mirror in place. Push the new wiring through the hole in the door.
  7. Step 2 Install and tighten the three retaining screws you took off when removing the old mirror.
  8. Step 3 Connect the power mirror wiring to the connection located on the door panel. Replace the rubber cover and interior mirror cover.
  9. Step 4 Put the front door trim panel back in place by securing all clips and tightening all screws.
  10. Step 5 Connect the Subaru Outback's battery cable to restore the power.

i will recommend i site where you will get all the information you need to remove and replace your side mirror
http://www.wjjeeps.com/mirrors.htm

Sep 10, 2009 | 2004 Jeep Grand Cherokee

2 Answers

Need to replace a broken window on rear passenger 1999 jeep chero


This information can help you to fix it:
- Section-08s-Power-Window-Systems-Ewj8s
- Section-23-Body-ewj23S (Rear Door, page 41 and next).

Good luck (remember rated this help).

Sep 09, 2009 | 1999 Jeep Grand Cherokee

1 Answer

Remove back hatch panel


Remove the 5 screws bolding liftgate interior trim panel; to aid in removal of the trim panel, start at the bottom of the panel.
Remove the trim panel a wide flat blade tool.

More details can find in ZJ-Secc-8P-Power-Door-Locks (page 4 and next).

I hope help you, good luck (rated this).

Sep 04, 2009 | 1994 Jeep Grand Cherokee

1 Answer

1999 Jeep Cherokee Sport How do you


I WOULD CHECK THE WIRING BETWEEN THE DRIVER'S DOOR AND THE POST..YOU WILL SEE A RUBBER BOOT BETWEEN DOOR POST AND DOOR..HAVE SEEN PARTIALLY BROKEN WIRES CAUSE ALL SORTS OF PROBLEMS HERE

Sep 03, 2009 | 1999 Jeep Grand Cherokee

1 Answer

Passanger window just fell down, when i shut the door.


jUST REMOVE THE SCREWS AT BOTTOM AND POP HANDLE BLANK OUT A LITTLE SO CLIP CAN BE REMOVED AT HANDLE MAKE A **** PULLER OUT OF AN OLD PUTTY KNOFE AND CUT A SLOT IN IT . bUT GOOD ENOUGH FOR KNOW .

Jun 14, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Rear hatch will not open


Fixed this last week in my Cherokee Classic. I started by releasing the hatch catch from the the interior by manually placing a flat screwdriver (something flat) under the catch, pulling the door inward, and letting the hatch open. From here unscrew all screws around the interior panel including the 2 screws under the rubber caps that mount the interior pull handle. Then carefully pull the panel, one section at a time, (carefully...this plastic is cheap) until all panel clips are free and the panel is removed. At this point you will see the inner mechanics of your door latch. Pushing your key fob lock you will see what you have been hearing, and lifting the outside handle you will see what it is supposed to be doing. As you sit in the interior of the car and face the inside of the hatch door, on the drivers side of the latch mechanism you will see a small threaded rod that is attached to the latch mechanism and the catch on the bottom of the door. This threaded rod must be adjusted/returned to the proper setting in order to lift the door catch. This entire mechanism is so cheaply made that you could have something broken in it also....but after finding the aforementioned adjustment mechanism, I realized that it would not take much for this part to self destruct. Hope this helps!

Jun 04, 2009 | 2000 Jeep Cherokee

1 Answer

Need to remove drivers door panel


please rate if this helps. Section 01-05: Trim, Interior 1995 Thunderbird, Cougar Workshop Manual REMOVAL AND INSTALLATION The interior trim component Removal and Installation procedures generally apply to all models. If some of the steps do not apply to the particular models being serviced, proceed to the next step. Trim Panels, Door Removal and Installation
  1. ssd~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Do not pry front door trim panel (23942). Prying on front door trim panel will break the hook retainers.
    Disconnect battery ground cable (14301) .
  1. Carefully pull front door trim panel finish panel (23712) away from front door trim panel .



    9e3f506.gif
Item Part Number Description 1 23713 Front Door Trim Panel Finish Panel 2 17B676 Outside Rear View Mirror Control 3 14028 Door Lock Switch 4 55928-S55 Screw (5 Req'd) 5 14529 Window Regulator Control Switch 6 23942 Front Door Trim Panel
  1. Disconnect wires from front door lock switches (14017), outside rear view mirror controls (17B676) and window regulator control switches (14529) , if equipped; remove front door trim panel finish panel.
  1. Remove front door trim panel retaining screw through front door trim panel finish panel opening.

    Trim Panels, Door


    83b257f.gif


    Item Part Number Description 1 20124 Front Door 2 23942 Front Door Trim Panel 3 383356-S100 Nut (2 Req'd Each Side) 4 56903-S58 Screw (2 Req'd Each Side)
  1. Remove interior lamp lens cover.
  1. Remove screw through interior lamp opening.
  1. Slide front door trim panel upward to disengage hooks.
  1. Rotate top of front door trim panel away from front door (20125) , and lift bottom hooks from front door.
  1. Disconnect window regulator jumper wire (14A630) .
  1. Remove front door trim panel.
  1. To install, reverse Removal procedure.

May 07, 2009 | 1994 Mercury Cougar

1 Answer

03 Jeep Grand Cherokee Driver side window


There are about 3 or 4 screws holding some molding at top and around the arm rest remove them. Starting at the bottom or back of panel put a small screwdriver or similar object between panel and metal of door and start prying slowly. You will need to buy replacement clips because usually they break when removing, but they are not that expensive. Just take your time and its not that hard. Had to take both off of wifes jeep to replace motor

Dec 14, 2008 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...