Question about 2004 Toyota Sienna

1 Answer

How do i replace front rotor in 2004 toyota sienna

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 864 Answers

1. Put your car on a level spot for safety and start your car Sienna.
2. For left front rotor, turn your steering wheel to the left all the way and stop the engine. DO NOT put emergency brake on! Put stopping blocks on the passenger front front, rear right and rwear left for safety.
3. Half loosen all front left tire nuts and jack up the left front then loosen all nuts and take the wheel off.
4. Use a 3" G-clamp from Lowes, Home Depot or any store near you, press against brake cylinder so that brake fluid flows back to its reservoir
4. Remove one bolt on the caliper and the other bolt loosen and lift the caliper with the other bolt on and rest on a block. Do not take the rubber hose off nor attend to loosen any brake fluid pipes and nuts.
5. Remove brake pads and remove the nuts on the rotor, done.
If you need further assitance please let me know and if this assisted you please feel free to rate the solution accordingly. Thanks, Midwest-tek

Posted on Aug 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove 2006 toyota sienna rear bumper


I have written a detailed step-by-step tutorial on how to remove and replace the bumper of a 2004-2007 Toyota Sienna on my blog: John Fixes Stuff How to Remove the Front Bumper on 2004 2007 Toyota Sienna

Mar 19, 2013 | 2006 Toyota Sienna

1 Answer

How to remove front bumper from 2009 sienna


I have written a step-by-step tutorial on how to remove (and replace) the bumper of a 2004-2010 Toyota Sienna on my blog: John Fixes Stuff How to Remove the Front Bumper on 2004 2010 Toyota Sienna

May 13, 2012 | 2009 Toyota Sienna

1 Answer

How to remove 2007 toyota sienna front bumper


I have written a step-by-step tutorial on how to remove (and replace) the bumper of a 2004-2007 Toyota Sienna on my blog: John Fixes Stuff How to Remove the Front Bumper on 2004 2007 Toyota Sienna

Feb 01, 2012 | 2007 Toyota Sienna

1 Answer

How to remove front bumper and grill from a 2005 Toyota Sienna


I have written up all the steps on how to remove the bumper of a 2004-2007 Toyota Sienna on my step-by-step tutorial on how to replace the radiator: John Fixes Stuff How to Replace the Radiator on 2004 2007 Toyota Sienna

Dec 19, 2011 | 2006 Toyota Sienna

1 Answer

How often should I have to replace the front brake pads and front rotors on a 2004 Toyota Sienna? We had them done at 30,000 and the dealer this morning says that we need them done again at 57,000 (two...


this sounds about right, 30,000 miles for mostly local runs, but rotors should be resurfaced instead of replaced every brake job, aset of good rotors can be cut at least twice between brake jobs.

Oct 09, 2010 | 2004 Toyota Sienna

1 Answer

Where to buy brake pads and rotors for 2004 toyota sienna


Brake pads and rotors can be purchased at any auto parts store.

Jul 10, 2010 | 2004 Toyota Sienna

1 Answer

How do i change the brakes and rotors on my 2004


When you say fit properly I assume you mean it's not going back together. Make sure you have the bearings and races installed correctly on the back side and that you are installing the correct rotor on the correct side with the correct bearings. The front and rear bearings look the same but they aren't and if you try putting that rotor on with the front side bearing installed in the rear of the rotor it will never go back together.

Jul 12, 2010 | 2004 Toyota Sienna

1 Answer

I would like to replace the front rotors, 2006 Toyota Sienna LE,can you describe the process? I can replace the pads but have not done rotors on front wheel drive before.


I don't believe I have enough space to expain it all so the best thing is to get a Sienna manual at your local auto parts store or on line and you can always refer to picturs too. This really helps - I'm a manual junky

Oct 15, 2009 | 2006 Toyota Sienna

Not finding what you are looking for?
2004 Toyota Sienna Logo

614 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...