Question about 2004 GMC Envoy

1 Answer

I need to remove the center console from my '04 GMC Envoy. my gear shifter slipped into Park, my dash shows drive but it is in Neutral. My brake pedal is locked as well and can not start car so trying to remove console to see if I can find release button or to see if I can reset cable. I removed screw from fron cup holder and removed a/c panel from back however it seems stuck underneath on back and I can not seem to pop loose or see any other screws. Please help!

Posted by on

  • kirklandrona
    kirklandrona Apr 17, 2013

    i am having the same problem did you find how to remove the console if so how....please help

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It sounds like your shifter cable came loose. the end piece came out that connects to your transmission. you will have to jack up the car and manually shift it back to park and then either replace your shifter cable which is 85$ or so just for parts or use a shifter cable replacement kit which runs for about 20 bucks online. http://www.atfspeed.com/store/index.php?main_page=index&cPath=21&zenid=g5830qsioo71fb0bsjtjne2cs6 the cable will only be sold by a dealer

Posted on Aug 31, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 50 Answers

SOURCE: My 2002 GMC Envoy transmission slips into neutral

try adding fluid and if still slipping neeed to have it checked could just need a fluid change

Posted on Oct 16, 2009

  • 20 Answers

SOURCE: envoy stuck in neutral

must pry it out

Posted on Jul 22, 2009

  • 1 Answer

SOURCE: remove the door that covers cup holder in the center console of a 2007 hyundai sonata

2005 Sonata the cup holder cover won't close. Is there a solution?

Posted on Aug 27, 2009

  • 524 Answers

SOURCE: Buick Regal cup holder problem

Yes absolutely you can my friend. and you are correct this will fit 1997 to 2004 actually!

Posted on Apr 09, 2010

  • 229 Answers

SOURCE: the front cup holder door is stuck in the closed

I had a similar problem and the cup holder was replaced under warranty. Looks like the pop up mechanism is broken...bad design

Posted on Apr 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

07 rabbit a/t shifter will not engage into gear


Hi, Sounds like the shift linkage is bent or broken. Have your mechanic check it out. Can not fix yourself. Good luck.

May 05, 2015 | Cars & Trucks

1 Answer

What can cause doors lock to unlock and then lock again while driving


The indicator for park/neutral is changing on the dash without you moving the shifter?
If so...the park/neutral switch on the transmission...(or could be on shifter housing) is informing the lock control module/body module... that the vehicle has been put in park...thus the door unlock actuation...then..apparently the switch is erroneously informing the lock module that it is in neutral...drive...thus locking the doors....could also be a fault in the general body module...which ..most likely...controls most of the body systems via CAN BUS....Controller Area Network system....
Odd that no codes are in the body/lock module....make sure your scan tool is indeed able to access the body control systems...if not...you need to find a location that will provide that service.

Apr 30, 2014 | 2006 GMC Envoy Denali

1 Answer

My mechanic tells me I need a new interlock shift in my 2002 GMC Envoy. On ocassion, I need to pump my brakes a few times before I am able to move my gear from park to drive. The shifter is cheap but the...


Before any parts are replaced, it needs to be determined if the brake pedal switch is being actuated properly and functioning properly. After that, the interlock solenoid needs to be checked, as well as the linkage.

Jan 03, 2013 | 2002 GMC Envoy

1 Answer

My suzuki verona 04, gear shifter is stuck on park, i have to hit the brakes severally for it to move to drive.


There is a lock mechanism that prevents moving shifter out of PARK unless your foot is on the brake. You can bypass this by sticking a small flat blade screwdriver or a key into the little slot on the console by the shift lever.

Are your brake lights coming on when you press the brake pedal?The shift lock is released electrically when your foot is on the brake, and the sensor is tied to the brake light switch circuit. The brake light switch can be seen if you look under the dash at the brake arm. First, check the connector. If the switch is out of adjustment, you can screw it in or out to adjust. Or just buy a new one.

Dec 28, 2012 | 2004 Suzuki Verona

1 Answer

2004 Envoy is not coming out of Park. The button will not push in for me to put it into gear. However, the Dash Indicator says its in Neutral. I can crank it, but the shifter will not move. How do I fix...


It sounds like your vehicles neutral switch has gone bad. If you replace the switch you should be fine. Then again It could also be your shifter cable. These problems are kind of hard to determine without actually seeing the vehicle. I hope this information helps you out at least a little, and if you have any more questions please feel free to ask.

Sep 19, 2011 | 2002 GMC Envoy

1 Answer

I have a 2004 GMC Envoy XT with 4wd. I started to


sounds like you have a broken shifter cable.Go under the rig and shift the transmision manually.Put on the parking brake and on the drivers side of the trany should be the lever to move.Look for the broken part while you are there it will also help to locate the shift lever on the trany.

Jul 31, 2010 | 2004 GMC Envoy

1 Answer

The button on our 2004 GMC Envoy gear shift will not depress when


The brake rlease switch for the gearshift might need adjusted-replaced or the shifter itself might need adjusted

Mar 22, 2010 | 2002 GMC Envoy

2 Answers

I am looking for the proper procedure to shift into 4wd lo on a 1994 GMC Suburban K1500


Typically and this is how it works on my 94 chevy suburban.

Put the truck into neutral.
apply the emergency brake
press the brake pedal and move the 4X4 shifter into 4wd lo
Than put the vehicle back in park release the emergency brake
and you should good to go from there.

please let me know if you need any further assistance with your vehicle and i would be glad to help you.

Jan 09, 2010 | 1994 GMC Suburban

3 Answers

The gear shift on my 2004 gmc envoy does not move from park.


cheak the brake pedel swich it work a swich in the gear seleter

May 26, 2009 | 2003 GMC Envoy Xl

Not finding what you are looking for?
2004 GMC Envoy Logo

1,331 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...