Question about 1992 Dodge Caravan

2 Answers

Maintenance required light on how do u turn it off autozone said car is to old to check with meters.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 630 Answers

Try disconnecting the battery for ten minutes.
These old systems also would throw a code for the check engine light to come on and you would turn the ignition key on and off three times...on the third turn leave it on...read the flahing light, example a code 23 would be two consecutive flashes...pause...then three consecutive flashes it would repeat the same code process three times then go on to the next,....when the codes were through the last code would flash a code 12...one consecutive followed by two consecutive flashes.
The code breakdowns are in the old Chilton manuals which for free can be found on AllData.com or at the public library.

Posted on Aug 31, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,092 Answers

Need to fine a repair shop that has a snap-on scaner, with that the light can be reset.

Posted on Aug 31, 2010

  • Alexander Mimun
    Alexander Mimun Sep 01, 2010

    The engine light can be reset by disconnecting the battery, but the maintenance light can ONLY be reset with a scan tool, to reset the mileage counter in the computer, the light will come back on in 60,000 miles again for maintenance.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset timing belt light on quantum 2.5 diesel


Try this: 1. Put the key in the ignition and turn it up one notch. The dashboard lights will not turn on. 2. Hold down your trip meter button next to the odometer. 3. When you are holding the trip meter button down, turn your key to the next notch. So, the dashboard lights will be on, but the car will not be started. Do not start the car. 4. Continue holding the trip meter button until the light turns off. You have now reset your Maintenance Required, or Maint Reqd, light

Jan 02, 2014 | 2007 Toyota Quantum 2.5

1 Answer

I changed oil on my 2006 Tacoma pick up, how do I turn off my maint light. Tks John


Try this procedure.

1. Turn the ignition key up one notch. (The dash lights will not be on)

2. Press and hold down the Trip Meter Button next to the odometer.

3. While continuing to press down on the Trip Meter Button turn the ignition key to the next notch or the "Run" position, the dash lights will come on but do not start the engine.

4. Continue to press down on the Trip Meter Button until the Maintenance Required light turns off.

The Maintenance Required light should now be reset.

Nov 06, 2010 | 2006 Toyota Tacoma

3 Answers

Why is my Maintencen Required Light on?


is it possible they did not reset change oil light?

Feb 23, 2010 | 2003 Honda Accord

1 Answer

Looking for transmission dip stick to check fluid i have two lights on check engine and maintainece required. i have topped off the radiator, the battery and the oil


To reset maintenance required hold in the stem for you trip on the cluster turn ignition switch on and keep holding stem until,light goes out as far as check engine autozone can reset it.

Aug 05, 2009 | 1998 Honda Accord

1 Answer

Maintence Required Light Came On


The maintenance Require light is there to remain you to do the maintenance on the vehicle.
If you stop by the Dodge dealer service department and ask for a service menus.
That can guide you as to what maintenance is need to be done.

Mar 16, 2009 | 1989 Dodge Caravan Cargo

2 Answers

Toyota Matrix Check engine light is on


Is it a check engine light or Maintenance Required light? If its the maintenance required light, turn the car off, push and hold the trip odometer button while turning the ignition back on. Don't start the car. You'll see five dashes that will count down to none. That'll reset the maintenance required light. Do it after every oil change and it'll come on when its time for an oil change.

Feb 15, 2009 | 2006 Toyota Matrix

2 Answers

Check engine & maintenance required lights on


Take to autozone and have them put it on a scanner its free then I can take it from there, can't guess with these newer vehicles. For the maintenance light its easy to rest contact me and I will be glad to help.Good Luck

Dec 11, 2008 | 2000 Honda Accord

2 Answers

Maintenance required


That is a friendly "get the oil changed light" and a reminder that a 25K service is due. To get rid of the light, push down the "A" trip reset button, turn the car off (while holding the button down), and turn the ignition on but don't start the car - while still holding down the A reset button. You'll see a count up meter on the display that will tell you when the system is reset. Enjoy.

Jul 08, 2008 | 2007 Toyota Camry

1 Answer

Maintenance required light blinking.


press and hold trip meter button - insert key and turn ignition to second position while continuing to hold trip meter button - when maintenance light stops flashing you can release button and remove key

Jul 03, 2008 | 2003 Honda Civic

4 Answers

Reset maint req


Reset - step 1 turn the key to the 'on' position. using the trip meter button, toggle the lcd until 'ODO' is displayed. step 2 turn the key off. now, push and hold the trip meter button. while holding the trip meter button, turn the key to 'on'. step 3 while you continue to hold the trip meter button, you will see on the lcd disply five (5) small dashes and they will begin to 'count down' rather quickly. step 4 continue holding the trip meter button and once all the dashes have been cleared, your lcd will display six zeros (000000) - release the trip meter button now - and then the lcd will display 'ODO' and your current mileage. at this time, your 'maintenance required'/oil change light has been reset.

May 15, 2008 | 2005 Scion tC

Not finding what you are looking for?
1992 Dodge Caravan Logo

308 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...