Question about Ford Taurus

1 Answer

1992 ford taurus 3.8 have a problem with windshield wippers check the fuse replaced the multi func switch replaced the motor when i turn on the wipers the motor only moves about a 1/4 turn raises the wipers from the resting position. does the same without the wipers hooked up.

Posted by on

  • nathan_meste Aug 31, 2010

    thank you
    found it on my wire diagram

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,016 Answers

Hi,

You have a faulty interval governor which controls the wiper motor stroke.
This is mounted on the right hand side of the steering colum on a support bracket.
You need to replace this and this will fix your problem.

Let me know if you need more information.

Thanks

Jason

Posted on Aug 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1998 ford taurus se windshield wipers don't work


first you have to check if the motor has power. get a tester and test for power on the motor. if you are not getting power check a fuse, is you are getting power but the motor is not working then you may have to change it.

May 07, 2014 | 1990 Ford Taurus

1 Answer

Windshield wipers don't work on 91 taurus, fuse is ok


Maybe worth checking wiper switch or wiper motor.If you have a multi-meter it maybe worth checking power supply to switch and motor..hope it helps.....

Dec 30, 2012 | 1991 Ford Taurus

1 Answer

I have a 1992 ford taurus changed the multi function switch changed windshield wiper motor checked the fuses and wipers still not working is a v6 3.0


Wire connection are the only thing left to check. But then again multi function may not be operational you just a have to ck connections motor for wiper may be bad also

Apr 21, 2011 | 1992 Ford Taurus

1 Answer

Windshield wippers wont start


check for blown fuse, then check for a defective wiper switch, i doubt both motor are worn, but it could be possible..spray window with windex on the windshield and then turn on wiper switch and give the wiper a slight assist with your hands to see if the motors are week.

May 06, 2010 | 2001 Chevrolet Venture

1 Answer

Windshield wipers work intermediantly. Replaced


it could be the ckt board on the wiper motor or the motor it self

Mar 10, 2010 | 1991 Ford Taurus

1 Answer

Windshield Wipper switch will not turn off, 2005 Trailblazer


There was a recall on the wiper circuit board cracking and causing the problems your having and at worst the wipers not working. For now you can pull the fuse to the wipers to save the wiper blades, but the problem is the circuit board where the wire harness clips on to the wiper motor cracks and will need to be re-soldered. You can check with the dealer to see if your wiper motor is still covered with the campaign a few years ago, if not you can buy the replacement circuit board at most larger auto parts store like Auto Zone and they can give you the step by step instructions to get the job done. A light tap to the electric motor where the wire harness will also fix this problem, but it really needs to be re-soldered or replaced. Good luck

Dec 10, 2009 | 2005 Chevrolet TrailBlazer

1 Answer

My 99 ford windstar has a click noise from the fuse box under the


Check if u have power going to the motor first.If you have then your switch is faulty.

May 30, 2009 | 1999 Ford Windstar

3 Answers

THE WINDSHEILD WIPERS ON MY 2002 EXPLORER WILL NOT SHUT OFF.


if you havent fixed this yet, the only (2) solutions I can think of would be #1. a bad wiper motor relay, or the more likely of the 2, a worn/bad multi-function switch (common on most Fords with a M/Func. switch, i.e. turn signal/wiper control lever).

Apr 26, 2009 | 2002 Ford Explorer

2 Answers

2005 Taurus. Winshield washer not working.


This may be multi-function switch failure. The multi-function is the turn signal/wiper/headlight switch. It may need to be replaced. Is this the type of switch you have. Hope this helps. If it is not the switch then the pump may be bad or have a bad wire connection.
GOOD LUCK

Jan 16, 2009 | 2005 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...