Question about 2006 Pontiac G6

Open Question

Panoramic sun roof, Pin on second pannel fell out and is in track. I need to know if i can remove glass panel and or part of the hardware to retrive pin and improve room to reinstall pin that fell out.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 6 Answers

SOURCE: power sun roof

It may be a circuit breaker.My windows and door locks stopped working,even after checking all fuses and replacing Main Driver side door switch! Found three circuit breakers that you can reset with a paper clip or small screwdriver. They were black with an aluminum cover on top. They don't come out easily,just insert the pin on each one.

Posted on Jul 27, 2008

Ad
  • 126 Answers

SOURCE: BMW X 3 Panoramic sun roof initialization.

title says X5, but description says X3. i'll explain for an X5, but X3 with the pano should be the same. and i'll explain function of the roof, not reprogramming.

button is located on the panel at the top near the front & center windshield. its the switch on the far left on this panel. its a switch that not only toggles, but also slides forward & back.

with your finger in front of the button, slide it back & release. this will make the cover slide back and store revealing the sun roof. you know have 2 options (tilt the sunroof up or open the roof completely).

to tilt it up, press up on the rear of the button and release. the rear of both roofs will pop up. to close, push up and release the front of the button or slide the switch forward.

to slide it open completely, repeat what you did to open the protective cover (slide the switch from front to back). the roof will open completely and stow out of the way. to close, slide the switch forward and release. pano roof will now close.

to close the cover, slide the switch forward again.

neat trick: if you want to tilt the sunroof open without opening the protective cover, press up on the rear of the button (when the cover is closed) and release. the cover will separate in the middle exposing about a 2-3 inch mesh, then tilts the sunroof open. to close, push the button forward again.

also, if you are above a certain speed (can't remember what it is off hand) with the sunroof open or tilted, it will close automatically, then perform the neat trick on its own to keep air coming in.

one last trick: if you want to open the windows and sunroof from outside, press & hold the unlock button (forward button on the key) and you will see the windows go down, then the roof will open to vent. releasing the button will stop the motion of the windows & roof.

hope this answered what you were asking.

Posted on Jan 28, 2009

  • 5 Answers

SOURCE: Sun Roof won't open

There may be a way to open the sunroof manually by turning the motor with a tool. The motor could be broken and "free spinning" or it could be off track or something is stuck in the track. You just need to take it apart starting with the interior trim the rest should be pretty self explanitory. You may also be able to find a diagram on www.autozone.com.

Posted on May 31, 2009

  • 1 Answer

SOURCE: 2005 Jetta, sunroof is broken

Me three.
If anyone has made headway please post.

Posted on Aug 07, 2009

  • 1 Answer

SOURCE: BMW X 3 Panoramic sun roof initialization.

Had same problem.. all you have to do to close it is slide plastic piece back or forward with a screwdriver. it had a hole you can put it in and does not require much pressure so if you are doing the wrong thing. IT IS NOT THE METAL PIECE ON THE TILT BUT RATHER THE PLASTIC PEICE THAT HAS A TRIANGLE SHAPE. hope this helps and saves the money to close it. im still trying to find out how to fix it so if anyone has luck let me know

Posted on Apr 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The factory sun roof front panel will not close all the way. Do you have reprogram steps for this unit. Thank you.


Lube the tracks on both sides. Look for something jamming the travel of the glass.

Oct 08, 2015 | 2005 Buick LaCrosse

1 Answer

Sunroof not closing


You must dismount the sunroof glass, and then run the open an close operation until the cables are lined up. You will know when. Then install the glass back. Hopefully the plastic track is not broken.

Oct 25, 2013 | 1996 Land Rover Range Rover

1 Answer

How to remove front glass panel on panoramic roof 2007 scion tc


go on line to sciontc.com and type ion this it should bring up how to remove it

Nov 30, 2012 | 2007 Scion tC Coupe

1 Answer

The sun roof won't close all the way shut. it opens ok and closes but won't lock shut


there shoulde be a hand crank (looks like a bent up allen wrench type thing) in the glove box...
there is a small hole in which it fits on the roof pannel... hand crank it tight to seal from inclimate weather.
Sounds like the switch is misalligned somehow.. and is stoping the glass short of full closed..
Open the glass full open and check the track area for debries and clear it out if there is any found.

use the tool to close the roof fully ...

Mar 31, 2011 | 1998 Chevrolet Cavalier

1 Answer

Sliding shade is stuck and won't slide. Glass is down in 1 corner, not flush with roof


the shade may be related to sunroof not closeing completely, the most common reason is the track is broken , this is the most common reason for when the sun roof doesnt close or jams when opening or closing its always the track breaks, the way to check this is to easy the headliner needs to be dropped and removed and then the glass from sunroof removed then unbolt track and drop down into car and check the track linkage and arms and track and see whats broken, note there are no replacement parts only motor or cable, as far as the parts that always break like an arm on the track this is not replaceable the track needs to be replaced, hope this helps , good luck.

Feb 06, 2011 | 2005 Chrysler 300

1 Answer

Chevy cobalt--leak from the sun roof dripping on the floor board on drivers side.is it easy to replace.also the drivers door locks and it cant be opened unless you keep locking and unlocking with the...


The Sunroof has DRAIN TUBES that get CLOGGED and Cause it to LEAK this WAY With the Roof OPEN you Should be able to SEE the DRAINS at the Front or Rear of the SIDE tracks, A Blast of AIR will UNCLOG Them One on EACH SIDE in LOW Spots

As For the DOORS UNLOCKING They Need LUBED from Time to Time and You May Even Need to Remove the Inside Pannels at liest PARTIALY to Gain Access to the Parts that NEED LUBE. I Recomend PB BLASTER Spray Lubercant for FReeing Up your Locking Mechenizms
This Should Cure your Problems Here

May 14, 2010 | 1995 Nissan Pathfinder

1 Answer

Rear passanger window fell off track


First you need to remove the door panel, which usually is just a few philip head screws or 10 mm socket sizedbut before you try pulling if your car has a tweeter/audio on a corner of the window make sure sure you remove that first very carefully you don't want to force since it is only held by its on clips... Then once you are ready to remove the door panel start by inserting a flat head screw driver in between the metal and the plastic pannel.

Then star opening it in a uniform manner only start opening from side till you open it since it has a bunch of plastic clips going all around the pannel to hold it on the metal.

once it is open you might need a rachet, a 10mm or 12mm socket and an extension for thet rachet.
Look for about 2-3 round holes enough to fit the socket in connect the power and psition the screwns of the control arm holding the glass and lossen the screws so tha glass can be pulled out its better and recommended to be done by two persons one holding the glass and one removing the screws.and then when the glass is pulled out all the way out is easier to re-aling it and as well one person pushes down and holds the glass the othe one makes sure from the insid panel area that the glass is going on its channel/u shaper rubber all the way....sets the screws back of once is well positioned start tightening the screws back on...and test it with the swich once is done, if stays in the track it means that you succeeded and your control arm is in good working condition and as boost up put some kind of lube on its track from up to down....And if it comes off the track againg you might need to replace the control arm which is that piece that holds the glass with the screws on it...

and to star putting the door pannel back on start by aligning it on the top , make sure that that ruber that keeps touching the glass gets in all the way and then just make sure that all the clips holding the pannel are all attached to the pannel and so just start pushing the pannel against the metal and it shoul clip once is well positioned.then just put the screws you took off the pannel and you should be don....don't forget to carfully clip back the and connect the tweeter window if has one....and voilah...you're done.

Mar 15, 2010 | 1995 Jeep Grand Cherokee

1 Answer

Initilaize panoramic sun roof


Have window closed. Press the vertical vent button (press in towards roof). Hold for 20 seconds and the window will start to open, keep holding button until the window goes all the way back and then all the way forward. BMW's initialization procedure.

Jun 15, 2009 | 2005 BMW X5

4 Answers

BMW X 3 Panoramic sun roof initialization.


I just had the same problem... the rear glass has 2 suports, which you will need to insert a long screw driver in it and force them back manually... It's a pain, but I can get you all the pictures to this procedure...

May 12, 2009 | 2004 BMW 3 Series

5 Answers

X5 panoramic sunroof


Ha, i just replaced one of these today. Yes they are serviceable but a pita. There is also a fix for the rear glass not closing. The rear tilt mechanisms need to be replaced bmw part number 54 13 7 240 682.

Jan 17, 2009 | 2004 BMW 5 Series

Not finding what you are looking for?
2006 Pontiac G6 Logo

Related Topics:

356 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

79123 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...