Question about 2003 Chevrolet Suburban 1500

Open Question

Were is my starter located on a 2003 suburban?

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why will my 2002 suburban crank but not start after installing a starter


assuming the starter is installed properly, it could be a variety of things. if the battery is not strong enough to fully start the truck. could check the condition of spark plugs and spark plug wiring.

Jun 20, 2014 | 2003 Chevrolet Suburban 1500

1 Answer

My 2003 chevy suburban wont start i gave it a charge its making a clicking sound


could have faulty starter relay could have faulty starter solenoid or starter.

Oct 12, 2012 | 2003 Chevrolet Suburban 1500

1 Answer

Need to locate starter relay on 350 GMC suburban engine


The starter relay is attached to, and a part of the starter.

Mar 12, 2011 | 1995 GMC Suburban

1 Answer

Where is the starter located on a 2002 Chevy Suburban? How do I replace it?


    Removing the Starter
  1. Step 1 Open the hood to access the engine compartment. Disconnect the battery by unscrewing the positive and negative terminals. This will prevent the risk of electrical shock.
  2. Step 2 Crawl under the passenger side of the truck and locate the starter. The starter is positioned between the transmission and the engine.
  3. Step 3 Unbolt the negative and positive wires from the starter with a socket wrench. Take the nut off the stud and pull the wires off the stud. Repeat the same for the positive wire.
  4. Step 4 Unscrew the two bolts holding the starter to the frame. Wiggle the starter to work it free from the flywheel.
    Installing the Starter
  5. Step 1 Position the new starter onto the frame. Tighten the bolts to secure the starter in place.
  6. Step 2 Unscrew the nut on the positive stud and push the positive wire down on the stud. Tighten the nut on the stud to secure the positive wires.
  7. Step 3 Unscrew the nut on the negative stud. Push the negative wire on the stud and tighten the nut to the stud to secure the wire.
  8. Step 4 Connect the battery cables to the terminals. Ensure the positive wire connects to the positive terminal. Ensure the negative wire connects to the negative terminal.
  9. Step 5 Start the truck to ensure the starter is functioning correctly. The starter should catch as soon as you turn the key and start the truck.

May 23, 2010 | 2003 Chevrolet Suburban 1500

1 Answer

2003 suburban help!!


battery falt ,recharge the battery for 2/3 days and use jumper cables as well to help it start

Dec 03, 2009 | 2003 Chevrolet Suburban 1500

1 Answer

Changing CO2 Sensor on 2003 Chevy Suburban


check the whole exaust sestyem? there should be 4to5

Mar 19, 2009 | 2003 Chevrolet Suburban

1 Answer

1999 suburban gmc - where's the starter?


on bottom back of engine on the passenger side of engine

Feb 19, 2009 | 1993 GMC Suburban

Not finding what you are looking for?
2003 Chevrolet Suburban 1500 Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...