Question about 1996 Chevrolet Blazer

1 Answer

I have a 96 Chevy S-10 truck I have replaced all of the relay fuses, the ingintion control module plugs wires fuel pump and filter and it still will not start

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

You need to decide if it is a fuel problem or an electrical problem. Open the air cleaner container and squirt a small amout of ether on to the air cleaner cartridge. If the S-10 starts you have a fuel problem. It will kill again when the ether runs out.

Posted on Aug 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuse for the alarm system


Here is the full list of fuses for you! and for the car.

Fuses on E-box, on left in Engine Compartment

Fuse 1 - Not assigned

Fuse 2 - 10/15A - Engine control unit

Fuse 3 - 5A - Radiator fan control unit

Fuse 4 - 5/10/15A - Lambda probe heater,
Lambda probe 1 heater after
catalytic converter

Fuse 5 - 10A, 20A - Lambda probe heater1,
Lambda probe 1 heater after
catalytic converter,
Fuel system diagnostic pump,
Charge pressure control solenoid
valve,
Exhaust gas recirculation cooler
change-over valve,
Crankcase breather heater element,
Vacuum pump for brakes

Fuse 6 - 5A, 10A,15A - Fuel system diagnostic pump,
Throttle valve module,
Activated charcoal filter system
solenoid valve 1,
Continued coolant circulation pump,
Auxiliary air heater heating element

Fuse 7 - 20A, 5A - Ignition transformer,
Fuel pressure regulating valve,
Fuel metering valve

Fuse 8 - 10A - Throttle valve module,
Activated charcoal filter system
solenoid valve 1

Fuse 9 - 5A - Automatic glow period control unit,
Electric fuel pump 2 relay,
Fuel pump relay

Fuse 10 - 5A - Speedometer sender,
Brake light switch

Fuse 11 - Not assigned

Fuse 12 - 5A - Coolant circulation pump

Fuse 13 - 5A - Water pump

Fuse 14 - 5A - Engine control unit

Fuse 15 - 30A - Voltage stabiliser

Fuse 16 - 30A - ABS control unit

Fuse 17 - 30A - Automatic gearbox control unit

Fuse 18 - 20A - Automatic gearbox control unit

Fuse 19 - 1A - Onboard supply control unit

Fuse 20 - 30A - Onboard supply control unit (AW0)
Automatic intermittent wash and
wipe relay (AW1)

Fuse 21 - 50A - Secondary air pump motor

Fuse 22 - Not assigned

Fuse 23 - 40A - ABS control unit

Fuse 24 - 50A - Trailer detector control unit

Fuse 25 - 50A - Terminal 15 voltage supply relay 2

Fuse 26 - 60A - Automatic glow period control unit

Fuse 27 - 60A - Radiator fan

Fuse 28 - 40A - Onboard supply control unit (AW1)

Fuse 29 - 40A - Onboard supply control unit (AW1)

Fuse 30 - 50A - Terminal 75 voltage supply relay 1

Fuse 31 - 30A - Amplifier

Fuse 32 - Not assigned

**************************************************

Fuse assignment - Interior Fuse Panel

Fuse 1 - Not used

Fuse 2 - 5A - Electronic steering column lock control module

Fuse 3 - 10A - Instrument cluster control module

Fuse 4 - Not used

Fuse 5 - Not used

Fuse 6 - 10A - Vehicle electrical system control module,
Interior ceiling lights,
Tail lights

Fuse 7 - 5A - Fog lamp relay,
Instrument panel and switch illumination dimmer switch,
License plate lamps,
Vehicle electrical system control module

Fuse 8 - 7.5A - Windshield and headlamp washer pump switch,
Windshield washer pump

Fuse 9 - 5A - Airbag control module

Fuse 10 - 10A - Right steering column switch

Fuse 11 - Not used

Fuse 12 - Not used

Fuse 13 - 5A - Automatic dimming interior rearview mirror,
Light recognition sensor,
Parking aid control module,
Air quality sensor,
High pressure sensor,
Climatronic control unit,
Tire pressure monitoring button,
Back-up lamp switch,
Left washer nozzle heater,
Right washer nozzle heater,
28-pin connector

Fuse 14 4- 10A - Left steering column switch,
ABS control module,
Light switch,
Airbag spiral spring/return spring with slip ring,
Fuel pump control module,
Data bus on board diagnostic interface

Fuse 15 - 10A - 16-pin connector (diagnostic connector),
Instrument panel and switch illumination dimmer switch,
Headlamp range control adjuster,
Auxiliary heater operation relay,
Mass airflow sensor,
Positive crankcase ventilation heating element,
Left front headlamp,
Left headlamp beam adjustment motor,
Right front headlamp,
Right headlamp beam adjustment motor,

Fuse 16 - 10A - Engine control module

Fuse 17 - Not used

Fuse 18 - 15A - Left front headlamp

Fuse 19 - 15A - Right front headlamp

Fuse 20 - 10A - Automatic transmission control module,
Selector lever sensor system control module,
Tiptronic switch,
Climatronic control unit,
Ignition/starter switch

Fuse 21 - Not used

Fuse 22 - 10A - Ignition/starter switch,
Converter box,
Alarm horn,
Interior monitoring sensor,
Alarm horn relay,
Dual tone horn relay

Fuse 23 - 10A - Vehicle electrical system control module,
16-pin connector (diagnostic connector),
Light switch,
Rain/light recognition sensor,
Compass magnetic field sensor,

Fuse 24 - 10A - Vehicle electrical system control module,
Access/start authorization control module

Fuse 25 - 15A - Automatic transmission control module,
Selector lever sensor system control module,
Multifunction transmission range switch

Fuse 26 - 15A - Brake system vacuum pump

Fuse 27 - Not used

Fuse 28 - 40A - Auxiliary heater operation relay

Fuse 29 - 1A - Vehicle electrical system control module,

Fuse 30 - 20A - Cigarette lighter,
12 V socket,
12 V socket 2,
Blocking diode

Fuse 31 - 30A - Light switch

Fuse 32 - 20A - Light switch

Fuse 33 - 40A - Heater/heat output switch,
Fresh air blower relay,
A/C control module,
Fresh air blower switch

Fuse 34 - 15A - Left front headlamp,
Left front headlamp,
Instrument cluster control module

Fuse 35 - 10A - Steering column electronics control module,
Instrument cluster control module,
Signal horn activation,
Data bus on board diagnostic interface

Fuse 36 - 25A - Vehicle electrical system control module

Fuse 37 - 15A - Left front headlamp DRL

Fuse 38 - 15A - Right front headlamp DRL

Fuse 39 - 15A - Low beam relay

Fuse 40 - 15A - Towing recognition control module

Fuse 41 - 15A - Towing recognition control module

Fuse 42 - 20A - Towing recognition control module

Fuse 43 - 30A - Front passenger door control module

Fuse 44 - A25 - Rear window defogger relay,
Vehicle electrical system control module

Fuse 45 - 30A - Driver door control module,
Front passenger door control module

Fuse 46 - 30A - Left rear door control module,
Right rear door control module

Fuse 47 - 15A - Fuel pump control module,
Fuel pump relay,
Fuel primer relay

Fuse 48 - 20A - Vehicle electrical system control module,
Vehicle electrical system control module,
Vehicle electrical system control module,

Fuse 49 - 20A - Climatronic control unit,
A/C control module

Fuse 50 - 30A - Front seat heating control module

Fuse 51 - 30A - Power sunroof control module

Fuse 52 - 20A - Dual tone horn relay

Fuse 53 - 15A - Front seat heating control module

Fuse 54 - 15A - Fog lamp relay

Fuse 55 - 20A - Light switch,
Left steering column switch

Fuse 56 - Not used

Fuse 57 - 15A - Radio,
Radio/navigation display unit control module

Fuse 58 - 1A, 30A - Telephone transceiver
DC/AC converter with socket, 12V-230V

Fuse 59 - 30A - Amplifier

Fuse 60 - 30A - Auxiliary heater control module


Hope this helps

--N

May 31, 2014 | 2010 Volkswagen Jetta

1 Answer

Installed new fuel pump, ignition control module, disconnected fuel line before filter no fuel being pumped and only a thump sound fro fuel tank. I don't hear the normal humm as it pressurizes. Checked...


the fuel pump fuse is in the fuse panel,using a test light with key on check all the fuses.you say you have checked the wiring so i am assuming you have checked powers and grounds at the pump on the pump wires and not the fuel gauge wires.its possible that you have a bad pump,and yes you can get a bad new pump.was the fuel pump the original problem or did you just start replacing parts without testing.

Nov 01, 2013 | 1991 Chevrolet S-10

1 Answer

1994 f150 6 cyl engine shuts down every 10 min restart after 5 min


Sounds like the module inside the distributor. Have to be replaced.

Sep 29, 2012 | Cars & Trucks

1 Answer

96 chevy truck, fuel pump relay switch (located under the hood, driver's side wheel well) keeps shorting out and melting fuse panel


I would replace the fuel pump and the fuel pump connector, both have problems in this year that cause excessive current draw and blow the fuse and overheat the system. If the relay socket terminals are discolored from heat that must be replaced as well. Of course before replacing any parts have a GM dealer confirm the problems i have guessed are to the cause.

Jul 09, 2012 | 1996 Chevrolet Silverado 2500

1 Answer

What does the codes 0627-0681-0680-0688 on 2006 chrysler sebring 2.4 16 valve 4 cly


Hi there:

DTC P0627 CHRYSLER - Fuel Pump Relay Control Circuit
ECM (Engine Control Module) detected an open or short in the fuel pump relay circuit
Possible causes
- Fuel pump circuit open or short
- Fuel pump circuit poor electrical connection
- Faulty fuel pump relay
- Faulty fuel pump control module (if applicable)


DTC P0680 - Cylinder 10 Glow Plug Circ, and,

DTC P0681 - Cylinder 11 Glow Plug Circ
The Engine Control Module (ECM) has detected a fault in the cylinder #10 or #11 glow plug circuit.


Possible causes
- Cylinder #10, or #11 glow plug circuit is open or shorted
- Faulty cylinder #10 or #11 glow plug
- Faulty glow plug module Help with this


DTC P0688 CHRYSLER - Auto Shutdown Relay Control Circuit Low

The Front Control Module (FCM) has detected the supply voltage below an acceptable value.

Possible causes
- ASD relay circuit is open or shorted
- Failed Auto Shutdown relay
- Failed ECM


Check all the ECM fuses, if the fuses are OK try replacing the ASD relay.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jul 03, 2012 | Chrysler Sebring Cars & Trucks

2 Answers

I REPLACED MY FUEL PUMP ON MY 1999 CHEVY SILVERADO EXT CAB P/U TRUCK AND IT CRANKS BUT IT WILL NOT START...ANY SUGGESTIONS?


did you check for fuel pressure at the fuel rail?
listen for the fuel pump when you turn the key on
did you change the wire harness when you changed the pump?

Sep 25, 2011 | Cars & Trucks

2 Answers

1997 chevy silverado 1500 350 vortech, new fule pump not working


before you drop tank again, check fuses & relay.then disconnect fuel line @ filter turn key to on position should hear fuel pump run and get gas stream out of line. if no flow from line new pump faulty be sure & remove negative battery cable first good luck.

Jun 04, 2009 | 1999 Chevrolet Silverado 1500

2 Answers

1996 chevy tahoe fuel system


check for voltage at the pump. If it has 12v there, (and a good ground) then pump is bad. there may be a pump fuse on the fuse block (can't remember) but if you find it has blown, the pump may be getting ready to fail. If fuse fixes the problem, replace it and carry an extra with you, then change the pump.

May 14, 2009 | 1996 Chevrolet Tahoe

2 Answers

1996 silverado 5.7 vortec cranks but wont start. fuel pump, gauges, "idiot" lights, blinkers do not work. flashers and all the rest of lights operate. Just replaced coil and this happens


Had the same problem with my '96 Silverado with 350 Vortec. The truck would only crank. It would start if fuel was poured down the throttle body. Could not hear the fuel pump hum. Fuse was good, but could not hear relay click. Relay was good, Did some electrical wiring trouble shooting. Turned out that one of the connectors that clasp onto one of the pins of the fuel pump relay wasn't making a good connection, too loose. I just stuck a peice of wire into the connector and pushed the relay back in. Relay clicked, Truck Started. It's been more than 4 yrs. since I made that McGuyver fix. Still firing.

Jul 26, 2008 | Chevrolet Silverado 1500 Cars & Trucks

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...