Question about 2005 Nissan Maxima

1 Answer

How do I put car in gear with engine turned off?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 312 Answers

If it's an automatic you'll need to start the car, put it in gear, and then turn the car off. If it's a manual simply depress the clutch and select the desired gear.

Posted on Aug 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000bmw323i shuts down when put in gear.


Automatic tranny? Check the neutral safety switch that only allows you to turn engine on when car is in neutral. If that switch/relay is malfunctioning it could turn off the ignition when you put gearshift into gear.

Oct 13, 2015 | 2000 BMW 323i

1 Answer

Battery fully charged, engine won't start or even turn over, gear locked in park, brake pedal is depressed.


This may help: http://www.toyotanation.com/forum/274-2nd-generation-2004-2010/199861-04-sienna-transmission-lock.html
There are multiple issues here.Won't crank? Go direct to starter.

Possible recall:http://www.toyoheadquarters.com/threads/2004-2005-2007-2009-toyota-sienna-shift-lock-solenoid-recall-d0r.206/

Nov 10, 2014 | 2004 Toyota Sienna

1 Answer

Audi 100 c4 with automatic transmission engine turns off when gear put on drive


stationary rpm is to low,its normal higher the handgearbox.
too keep motor running it chould be higher so engine stay running,
while put in drive.

Apr 13, 2013 | Audi 100 Cars & Trucks

1 Answer

1996 villager vg30e distributor won't turn, gear inside engine does not turn


You have defective camshaft drive timing belt (also runs the distributor). Pull the front cover off the engine and take a look. This is a free running engine and the broken belt will cause no damage to the engine valves in this make, it is a different story in other models like the Maxima.

Oct 18, 2012 | Cars & Trucks

2 Answers

87 maxima will not turn over battery has full charge car has been sitting for 7 years


A few options,
1, starter seized, remove fromcar and oil it, turning the spindle with grips or similar.
2, starter jammed, tap with a mallet or hammer, if it has a square "nut" on the back of the motor, turning this will ease the jamming.
3, engine seized, put a spanner on the crank shaft pulley and try to turn the engine, if a petrol engine, remove the sparkplugs to make it easier. Or put the car in gear (2nd) and rock the car back and forth to free the engine, this also frees the starter and brakes if they are stuck.

Oct 24, 2009 | 1987 Nissan Maxima

1 Answer

The idle drops when i put it in gear almost stalling the engine


That is normal, in park or neutral there is no resistance on the engine when you put it in gear there is resistance because the car wants to move. Also when you turn on the ac that turns on the compressor that is run off the belts of the engine so it puts more resistance on the engine. Low idle is not a problem unless the engine dies.

Oct 22, 2009 | 1992 Honda Accord

1 Answer

Difficult to put in gears.


Either your clutch is not fully disengaging or the synchros inside the transmission are worn.

Jun 16, 2009 | 2000 Isuzu Rodeo

2 Answers

I need a diagram to sincronize the timing belt of my isuzu tropper 3.2 sohc


if this is 6VD1 engine it has single cam gear each head, but is still a 2 cams per head, engine
if belt has broke or you have turned any gear you must remove rocker covers to check positions of camshafts front lobes are in certain spot as well as timming mark on belt driven cam gear to cover
this cam gear is a 3:1 ratio (3 turns of cam gear = 1 turn of cams)
184d763.jpg

Jun 12, 2009 | 1993 Isuzu Trooper

3 Answers

Ford probe


the front drive axle on one side may have not been installed all the way in to the transmission, check to see if it is loose and have some one look under front end with engine on, front end jacked up, emergency brake on and in gear to see if a axle is turning. if one is and yhe other is not put the car in park and turn\ roll the wheel that was not turning by hand if it rolls your problem is most likley to be the axle has come loose from the transmission

Oct 18, 2008 | 1990 Ford Probe

Not finding what you are looking for?
2005 Nissan Maxima Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14251 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...