Question about 1999 Volvo V70

Open Question

How do I remove a faulty hazard flasher switch in my 1998 Volvo V70 to install a replacement?

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 76 Answers

SOURCE: faulty flasher unit

The flasher button is the relay. Push the two long strips at the side of the radio. They are on the faceplate, they look like two long rectangles. Push them in until they click. Then pull them out like handles. You can then reach in the recess and feel the flasher switch just to the bottom of the hole the radio sits in. The flasher switch itself is about six inches long. Push the back of the switch and it will pop out through the front panel. It does require a good amount of force so cover your wrist/arm with a rag to keep your arm from getting cut up on the hard plastic.


Hope this helps

Posted on Feb 23, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Volvo 1998 V70 Wagon,turn signal lights do not flash,hazards do not lights or flash


Sounds like the hazard flasher switch has failed and needs to be replaced.

Jun 08, 2014 | 1998 Volvo V70

1 Answer

I'm hoping someone can tell me where the flasher relay is. Not the part that's behind the hazard switch, but the actual relay that they give you at the parts place. You know the 3 prong square plug thats...


FLASHER UNIT BUILT IN THE TURN SIGNAL WIND SHIELD WIPER SWITCH YOU HAVE TO REPLACE TURN SIGNAL SWITCH TO FIX FLASHER.SINCE ALL BUILT IN ONE UNIT.

Feb 11, 2011 | 1998 Volvo S70

3 Answers

Where does the flasher go on a 98 chevy malibu


Replacement The turn and hazard flashers are integrated into one flasher on these models. The flasher is located in the hazard warning switch and the hazard warning switch is located on the trim plate. Replace the flasher by unplugging the old one, removing it from the panel, and plugging in the new one.
  1. Remove the bezel from the ignition switch.
7f58edd.gif
Remove the bezel from the ignition switch

Carefully remove the instrument panel accessory trim plate.

9f5c3cc.gif
To remove the trim plate, use a suitable prytool to carefully apply pressure at the retaining clip points . . .

bd28884.gif
. . . then gently pull the accessory trim plate away

Detach the electrical connector from the hazard warning switch.

daa6205.gif
Unplug the electrical connector from the hazard warning switch . . .

Unfasten the screw securing the hazard warning switch and remove the switch.

c506713.gif
. . . then unfasten the screw securing the hazard warning switch and remove the switch from the vehicle


Installation is the reverse of removal.

Dec 01, 2009 | 1998 Chevrolet Malibu

1 Answer

Where can i locate the signal flasher of my 1998 volvo v70 wagon


up above fuse box under driver side dash panel. Little silver drum looking things

Oct 06, 2009 | 1998 Volvo V70

1 Answer

2003 v70 volvo brake light problem.


check to see if the car has a multifunction switch this switch controls everything from brake lights to hazard lights to wipers ect. so you want to call volvo parts ask them about the multifunction switch and ask them if the hazard switch is built into multi then replace the switch.

Jun 12, 2009 | 2003 Volvo V70

1 Answer

TURN SIGNAL LIGT WONT BLINK ,JUST STAYS ON


dont replace the switch make sure you have the correct bulb installed correctly first. might save you another headache i take it the other blinkers work than you have a good relay good luck

Apr 14, 2009 | 1998 Volvo V70

1 Answer

Faulty flasher unit


The flasher button is the relay. Push the two long strips at the side of the radio. They are on the faceplate, they look like two long rectangles. Push them in until they click. Then pull them out like handles. You can then reach in the recess and feel the flasher switch just to the bottom of the hole the radio sits in. The flasher switch itself is about six inches long. Push the back of the switch and it will pop out through the front panel. It does require a good amount of force so cover your wrist/arm with a rag to keep your arm from getting cut up on the hard plastic.


Hope this helps

Jan 03, 2009 | 1998 Volvo V70

Not finding what you are looking for?
1999 Volvo V70 Logo

Related Topics:

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...