Question about 2008 Chevrolet Silverado 1500
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There should be a switch in the door frame which the door pushes in when it is closed. Sounds like it's loose or pushed back into the frame.
Posted on May 04, 2009
SOURCE: Front door speakers
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
SOURCE: front door speakers
i found the service buliton on this problem straight from GMC, bulletin No. 07-08-44-008 this is a recall issue and you need to go to the dealer to have them resolve.. i was locked out of your other question please rate this with the other one you have up... thank you Dave
Posted on Sep 03, 2009
I had the same problem as this...
When you open or close your door there is lever that sits just below the the door latch that is attached to the frame of your car by a single screw.
It is a black plastic L shaped bit of plastics that slides on its own guide. It has obviously started to malfunction over time.
To double check this:
Turn the car lights on
Open your door
Locate the black L shaped plastic level.
Wriggle it around sliding back and forth - if it starts to work when you are applying pressure onto it it looks like it has broken.
Go to your local wreckers and ask them for a replacement part (it cost me $2.00 AUD to get mine)
To take the part off all you need to do is push the level back as far as it will go and you will see a phillips heads screw holding it in place.
Undo the screw and detach the part (there will be a wire attached to the back of the metal guide)
Unplug the wire and throw the part into the bin.
Attach the wire to the back of the new part and screw the new one into place.
All should be working fine now.
Posted on Mar 09, 2010
Testimonial: "Thank you for helping. That did it!"
Tips for a great answer:
Aug 09, 2016 | Chevrolet Silverado 2500HD Cars & Trucks
Feb 22, 2016 | Cadillac Cars & Trucks
Apr 20, 2015 | 2000 Chevrolet Cavalier
May 28, 2014 | 2005 Buick Terraza
Oct 28, 2013 | 2008 Chevrolet Impala
Jul 19, 2011 | 2008 Chevrolet Impala
May 28, 2011 | 2007 Chevrolet Impala LS Sedan New Cars
May 08, 2011 | 2007 GMC Sierra 2500HD
Jul 20, 2010 | 2008 Chevrolet Cobalt
469 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: