Question about 2007 Jeep Wrangler Unlimited Rubicon 2 Doors

1 Answer

Accessory power ports are not working and fuses are ok. what could the problem be?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,353 Answers

Sometimes the ports have a fuse built on the back. you will need to check and be sure that there is power going to them, if so, the fuse may be bad that is mounted on the back of the port.

Posted on Aug 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 jeep liberty flashers and lighter port wont work. changed fuses, still wont work. any help??


What flashes ? What fuse's did you change ? Only one fuse for lighter , M7 20amp located in the ( TIPM ) - totally integrated power module . There is a relay that powers that fuse , Run/ Accessory relay , also in the (TIPM) The TIPM is part of the under hood fuse box.

Oct 22, 2016 | 2008 Jeep Liberty

1 Answer

Scan tool want connect to ecm


Year/make/model/?? If there is no power at the ALDL/OBD port the scan tool will not connect. The power is usually provided from the accessory fuse. If the power outlet/lighter is not working, this will most likely be the fuse/problem

Oct 18, 2015 | Cars & Trucks

2 Answers

Windows


You need a wiring diagram to
learn the circuit your working on,
& find places to do your testing

Apr 22, 2014 | 2000 Cadillac Eldorado

1 Answer

2011 honda pilot accessory port failure


remove what.

i bet you didnt know there are 2 fuse boxes.

check all fuses in both boxes.

or read the drawings on alldata.com

see what fuse powers this acc. port.

the inverters suck big current and will blow a power port in jiffy

(read amps on inverter, and see, wow huge)

1000w is 83+ amps.

500w is 40 amps. both are fuse killers.

fuse that look bad are

fuses that look good, can in fact be bad, hair line cracks

use any ohm meter on low scale, 0ohms good. infinity bad.

to test any fuse.

Jan 10, 2014 | 2011 Honda Pilot

1 Answer

Neither lighter outlet works on my 01 allero, just bought it used so don't know if and when they did work! Help..need to charge stuff!!


You have options there. First use a test light and probe the center terminal of the outlet. If it has power, check the ground on the socket. If no power, check the fuse. (if you have no diagram, probe all of them and replace any that don't have power at both ends with the key on, and replace any that are blown. the one you are looking for is usually 20 or 25 amp). Your other option is to create a new circuit. To do that, find an open fuse port that only has power with the key on. attach a wire (close to 14 gauge is best) to a spade connector and plug it into the fuse connection that has power. Run that wire to the connector at the rear of the accessory port (lighter housing center post). If you do that, make sure you install an accessory fuse holder in that wire that is rated at 25 amps. I use that method to install additional ports so you don't have to plug in one of those "octopus outlets" in a working power outlet. Only difference is that I also install a new lighter housing into the dash. That requires a new hole in the dash or console and a ground wire to the outside of the housing.

Oct 01, 2011 | 2001 Oldsmobile Alero

1 Answer

Which fuse for my jeep wrangler 97 is for the ciggarette lighter?


Hi, the 1997 Wrangler has two fuses to check. Both in the Power Distribution Center (PDC) under the hood. Fuse 3 supplies the accessory circuits through the ignition key and energizes the coil of the accessory relay. If your radio works that fuse is OK. The other fuse, fuse 5 supplies the power to the accessory socket when the relay is energized. The relay is behind the glove box and mounted to a stack of multi-wire connectors.
Replace fuse 3

Jul 26, 2011 | 1997 Jeep Wrangler

1 Answer

Accessaory power plug stopped working


Check all the other fuses in the car,sometimes they tie a few together.

Mar 29, 2010 | 2004 Chrysler Sebring

1 Answer

Accessory (2) ok cig lighter fuse OK All outputs not working


Check the fuse that sais POWER SOCKET on it. Its most likely blown. Common problem in Muranos. Too much draw by what ever you are plugging in blows that fuse.

Jul 21, 2008 | 2003 Nissan Murano

Not finding what you are looking for?
2007 Jeep Wrangler Unlimited Rubicon 2 Doors Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...