Question about 2007 Jeep Grand Cherokee Overland

3 Answers


Posted by on


3 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

I have found the solution to this problem. I have replaced a total of 3 starter motors and has gone away for various periods of time. Further diagnosed when concern happened again starter
would work again after starter ignition feed wire wiggled. I found corrosion build up in connector at ignition feed wire. I replaced connector on wire to starter solenoid and concern has not returned.

Posted on Sep 13, 2010

  • 1 more comment 
  • jeep help Nov 09, 2010

    my jeep is doing the same thing. the dealer told me i needed to replace a censor in the ingnition switch. 2 days later it wouldnt start again. At dealer now... i am going to have them check the connector and hope that solves it.

  • jnacy500 Jan 20, 2011

    did this work for you? My jeep is at the dealer now and they have no idea whats wrong with it!

  • winitall001
    winitall001 Jan 27, 2013

    mine is doing the same thing for second time replaced starter the first time one year later its doing it again


  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Did you ever find the cause of this? my jeep is doing the exact same thing!!!!

Posted on Sep 10, 2010

  • edge60059 Jan 23, 2011

    I have the same problem..the first i changed the ignition module140.bucks same peoblem then they changed the relay block.. same'd going back to the dealer today..don't know what to do next..


  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Roth, on 15 Feb 2011

The same thing happened to me and the road service mechanic removed the earth connection from the battery which resets the computer and it has worked fine since - except for the radio which now has to have te pin code re-inserted

Posted on Feb 15, 2011

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Have 2007 Jeep GC, v-6, dash lights started flashing and gauge needles swung in full arc, what's cause?

what lights, be clear, there are like 10 or more lights there.
warning lights, illumination?
so the guages stick high, do say what they do and where they end up.?
name all lights that flash,
is car battery charged up? at 12.6vdc rested.

does car start?
does car drive ok>
do headlights work perfectly?
my other shoe drops, do tell all good, bad and ugly and pretend
we are blind, we are.

the cluster you mean the dash is huge thing, with lots of stuff there.
radio is part of dash

the cluster on this jeep is really a stand alone digital display.
it has 2 power pins, and 2 ground pins. for power
and 2 fuses. (are they both good and not loose")
the CLuster brain, is a computer too. as are most modules in this car.
if it has power it boots up with PCM with key turn
and attempts to link up communications with the PCM
and sync, up odometer readings.
and all other indications on the cluster are synced, now.
if you bet comm errors it will do odd things.
but we scan it next.
using any scan tools (even $5 one with canbus)
we scan it and see errors.
i bet you do.
and that, tells you whats wrong.

Feb 19, 2015 | 2007 Jeep Grand Cherokee

1 Answer

The dash lights won't come on in my 97 jeep cherokee. the lights were on when I bought the jeep.

Look at your fuses under the dash or by the battery black rectangular box

Sep 07, 2011 | 1997 Jeep Grand Cherokee

1 Answer

Have to turn the ignition on and off several times to get the fuel pump working

Your Jeep ecu is in need of repair. Your jeep is having a common problem known as the "Delayed check engine light" starting problem. Next time you try starting the jeep and it the fuel pump won't prime, look at the dash.....the check engine light is not on and the fuel pump will not come on until the check engine light eventually come on, on the dash. Have it repaired and it will eliminate the delayed check engine light start problem.

Aug 15, 2011 | 1995 Jeep Grand Cherokee

1 Answer

Electronic key on 2008 jeep cherokee says key damaged or key not programmed. car won't start. some things work but radio won't come on. etc..

electronic key on 2008 jeep cherokee says key damaged or key not programmed. car won't start. some things work but radio won't come on. etc..

Jul 24, 2011 | 2008 Jeep Cherokee Grand

1 Answer

I drove the Jeep home with no problems. This morning, it won't start -- no power at all, no radio, light, power lock, power window ... nothing works but I keep on hearing a fast "tick, tick, tick" sound...

Your battery is low or has weak cell. I recommend jump starting vehicle. If it jump starts then replace the battery. If
battery warning light is illuminated on dash may have charging
system concern.

Sep 12, 2010 | 2007 Jeep Grand Cherokee Overland

1 Answer

2007 Cherokee will not start. Lights work, radio

Problems could be the starter, you could switch the transmission to try to put the transmission in neutral and see if it gives start and also problems with the immobilizer or the starter relay you can remove and make a direct connection and are sure is not the starter. thanks

May 10, 2010 | 2005 Jeep Grand Cherokee

1 Answer

Minor Electirc Troubles (1998 Jeep Grand Cherokee Laredo)

Definately take it back to the radio installer

Jan 20, 2009 | 1998 Jeep Grand Cherokee

1 Answer

Od drive and transmission overheat warning light

hi first of all check the temp sensor on the auto box.also check transmission oil cooler that it is not blocked.when the computer for the auto box detects a problem it turns off the over drive.

Oct 14, 2008 | 2001 Jeep Grand Cherokee

Not finding what you are looking for?
2007 Jeep Grand Cherokee Overland Logo

2,249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides