Question about 2005 Pontiac Vibe

Open Question

Need to change the inner fender liner on driver side on a 2005 vibe and i have trouble with "clips" near door, how to do the job without having to remove anything but the liner?

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
leetamara
  • 702 Answers

SOURCE: Will it be a safety issue if Fender liner missing?

No, the fender liner is basically there to keep your engine from getting dirty. I haven't seen any other use for them.

Posted on Jul 09, 2008

Ad
  • 30 Answers

SOURCE: 2005 Pontiac Vibe having trouble shifting 1st 2nd code P2716 MIL

This is most likely due to a bad solenoid pack in transmission. You could have tranny serviced and see if it helps. Poor fluid condition makes valves stick in those.

Posted on Aug 14, 2009

Ironfist109
  • 3018 Answers

SOURCE: to replace the front bumper

  • Put the bumper face on first. I assume by "fender covers" you mean the covers in the wheel well? They go on last. You don't need to do it all as one piece. When you attach the face you will do most from behind the bumper from underneath the car anyways. If you are installing a bumper face and fenders themselves and the covers in the wheel well I would go bumper face then fenders then wheel well covers just to make it a tad easier.

Regards, Tony

Posted on May 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Replacing front right turn signal bulb


what are the ways u tried....
open the bonnet, nw u can find an access to the front right lighting assembly.... u can change the bulb nw 

reply back

Jun 15, 2008 | 2007 GMC Yukon Denali

1 Answer

How too remoove driver side fender 2005 envoy


once you have removed the headlight assembly and remove the bolt behind the headlight assembly, continue locating the 10mm bolts attaching the fender along the top side, along the bottom in front and behind of the tire, open the drivers side front door, look into the opening between the door hinges and with a flashlight and a long extension on your ratchet you will then remove the two bolts between the fender and door, one on top and one at the bottom. you also have to remove the retaining bolts that attach the inner fender liner to the fender.

Jul 06, 2014 | 2005 GMC Envoy Xl

1 Answer

Headlight Bulbs Replacement. Do we need to remove bumper?


No. The access to the headlight bulbs can be done by removing the inner fender liner. It can also be done
by removing an inner fender liner clip and then pulling back the inner fender liner. This will create an
opening throught where you can insert your hand into. The video below may help you accomplish the task. If it doesn't play here, you may follow the direct link:


http://www.youtube.com/watch?v=QPtFlkqGn8Q



Jun 07, 2014 | 2006 Honda Fit

1 Answer

How to remove front bumper


Remove screws in wheel wells holding bumper to inner fender, and fender. Then remove screw holding the splash guard to the lower bumper cover. Finally, remove screws holding the bumper cover to the core support on each side of the grill, and possibly the outer corners, near the head lamps. There will be some pin/clips retaining the bumper cover still, but separate easily without tools.

Nov 02, 2012 | 2005 Kia Rio

1 Answer

Headlight BULB, Driver Side, Can I go thru the fender well to change it out? Or do I have to drop the bumper on driver side?


remove wheel,unfasten front half of inner fender liner,pull liner back and you will have access to change bulb.

Feb 06, 2011 | 2006 Nissan Maxima

1 Answer

How to change headlight bulb, '06 Honda Accord drivers side?


remove a few of the clips on the inner fender liner, depending on which bulb u are replaceing(left or right?) turn the wheels in either direction and u will be able to slide ur hand or arm between the liner and fender to gain access to the bulbs and connectors..do not remove the battery .

Mar 28, 2009 | 2008 Honda Element

1 Answer

Front fender removal


Hiya... here's the details of fender removal/installation:
the left-side (same for right-side) fender has 6 bolts attached to the "sidebody" frame.
The bolt location:
3 are on the top fender-easy to find when hood is open,
1 is hidden at the rear of top inner fender-just open the left-front door wide to find it (early equinoxes had foam-like noise absorber material in it, just remove it from underneath fender after the wheelwell liner is removed),
1 bolt is hidden at bottom of front fender area at headlight/bumper area-you need to remove plastic wheelwell liner to gain access,
1 bolt is hidden at bottom of rear fender area where the black plastic rocker panel meets below the fender...
THIS area is probably the most difficult task to do since it requires you to remove a small bolt found on the front of rocker panel behind the front-left wheel then use a flat screwdriver or clip removal tool to pry open the black plastic **clip's 'dime-sized' head prior to pull out the clip's body (it has 8 clips underneath the chassis) then use your hands to grasp the rocker panel underneath, pull it down-toward you...this should do it....USE CARE during rocker panel and clip removal/installation so you don't break the clips!
It also has yellow plastic clips inside the rocker panel (used as a guide during installation into rocker sill holes-use caution not to break it)
**note: early equinoxes had rocker panel clips that you can actually pull it out from the hole, while later equinoxes has 'built-in' clips inside rocker panels that you don't see the clip heads below it due to engineering part design change**
Be sure to exercise care when handing this task!

808b156.jpg

Nov 20, 2008 | 2005 Chevrolet Equinox

1 Answer

Diagram of the serpentine belt for a 2005 pontiac wave


there should be a diagram underneath the hood look near the radiator or up on the inner fenders

Oct 28, 2008 | 2005 Pontiac Vibe

3 Answers

Battery changing


Ok, trust me on this one, take the drivers side tire off and remove the forward inner fender panel. If you try it without removing the tire, it is just a royal pain.

Aug 25, 2008 | 2008 Dodge Avenger

Not finding what you are looking for?
2005 Pontiac Vibe Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...