Question about 2007 Chrysler Aspen 4x2

Open Question

What does the Malfunction Indicator Light mean in a 2007 Chrysler Aspen

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 46 Answers

SOURCE: how do i turn off my malfunction indicator light?

If it is an error produced by the engine control system, you should be able to clear it using an OBD II reader. OBD=on board diagnostics. You have to find the plug for the unit, but just plug it in and the machine will read it. I usually borrow one from the local car parts store--give an ID and they will let you temporarily borrow it. Make sure you read the error code as well. There may be some interesting info about what produced the error message. Good luck.

Posted on Apr 09, 2009

polarcycle
  • 1392 Answers

SOURCE: malfunction light popped up

If it turned over slowly, You most likely need a battery. The light can/will come on for battery voltage low. You should have it checked to make sure though.

Posted on Jun 18, 2009

greezy_je208
  • 237 Answers

SOURCE: WHERE IS THE FUSE FOR THE BACK UP SENSOR, LOCATED

under the hood.

Posted on Dec 16, 2009

  • 98 Answers

SOURCE: Malfunction Indicator light

usually a sensor has gone bad. have it check by a mechanic on the computer.

Posted on Mar 29, 2010

  • 593 Answers

SOURCE: I have a 2005 Chrysler 300C hemi and the

The malfunction indicator light(mil) can come on, if there is a problem in
1 or more of the vehicle's systems. Such as fuel/electrical or emissions.
To isolate the problem, the car needs to be scanned with an OBD II
(onboard diagnostic)scanner. You can stop by any of the auto parts chain store's(advance/auto zone/napa)and they will scan it for free.
Hope this helps.

Posted on May 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code P1126 Chrysler Aspen 2007


Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1126 Chrysler OBD Code Description
Throttle Control Motor Relay Circuit Open is one of the definitions for the P1126 Chrysler; however your vehicle's manufacturer may have a different definition for the P1126 Chrysler code. Please check below for your specific make.
P1126 Chrysler Information for specific makes
Locksmith Hamburg NY 716 646 8383 24 Hour Locksmith In Hamburg NY

Aug 04, 2016 | 2007 Chrysler Aspen

1 Answer

Back & front tail light will not cot off. Light switch is off, car is off & keys are out of ignition.


Sounds to me you have a short to ground meaning its bypassing the switch that turns on and off the lights and staying on

Dec 30, 2015 | 2007 Chrysler Aspen

1 Answer

Malfunction indicator light (MIL) mean


It means a problem has occurred in the engine and or emission system.

Aug 31, 2013 | 2008 Chrysler Aspen

1 Answer

Malfunction indicator light


If you mean the check engine light, you have to get the computer scanned for trouble codes, then after the repairs are made, the codes are erased and the light will stay off.

Apr 22, 2013 | Chrysler Cars & Trucks

1 Answer

My malfunction indicator light came on stay on for a while an went back off what does this mean


Not okey

Anytime you have the engine started & any light
stays lite on your dash you have a system malfunction

Jan 30, 2013 | 2007 Chrysler 300

1 Answer

My malfunction indicator light came on but it went back off what does this mean 2007 chrysler300


The MIL is an indicator of excessive emmissions,if the light went
out,it's ok. May have been a loose gas cap or even a wheel spinning
in snow,I'd let it go unless it comes on and stays on.

Jan 30, 2013 | 2007 Chrysler 300 AWD Sedan

1 Answer

2007 chrysler aspen at idle, rpm's fluctuate erraticly.why?


You probably have a bad throttle position sensor.

Sep 20, 2012 | 2007 Chrysler Aspen 4x2

1 Answer

Malfunction light came on..something about catalytic convertor?


this would mean the converter is not cleaning the exhuast good, the good part of this is that it should be covered under the federal emmission warranty through your local dealer, all emission components are covered for 8yrs or 80,000 miles. unless you have more than 80,000 miles then you would pay. also have this checked by a tech this could be due to a bad airfuel sensor or o2 sensor, if one of these sensors are giving a false reading to the computer it will assume the cat converter is bad. i have run into this more times than not. good day.

Aug 24, 2011 | 2007 Chrysler Aspen 4x2

1 Answer

What does a Fault code of P0456 mean on a 2007 Chrysler Aspen?


I would ask the Chrysler dealer, probably quicker than asking anyone else.

Sep 11, 2010 | 2007 Chrysler Aspen 4x2

Not finding what you are looking for?
2007 Chrysler Aspen 4x2 Logo

Related Topics:

711 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...