Question about 2005 Ford Mustang

1 Answer

Have 2005 mustang,can the emergency brake handle assembly be tightened by removing consol

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 17,130 Answers

If you meant only the brake handle mountings then it is possible but if you mean for tightening the play on the hand brakes you will have to adjust from the bottom the play adjusters at the lever end so as to establish a good pressure for the hand brake to act..

Posted on Aug 31, 2010

Testimonial: "the hand brake assembly is loose,can it be tightened by removing console?"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How too release the emergency brake foot pedal when the cable is broken?


About 73,400 results (0.87 seconds) Search Results

    Parking brake release cable snaps - Chevy Avalanche Fan Club of ...

    chevyavalanchefanclub.com > ... > Problems: Brakes

    24 posts - ‎16 authors
    Went to release the parking brake on my 04 and the cable snapped. ... More like the end cap coming of the cable that attaches to the foot pedal. ..... Then I released the parking brake, pulled out the broken release cable/handle assembly, ...

    How To Install Repair Replace Parking Brake Release ...

    ? 5:54
    https://www.youtube.com/watch?v=qx0oGfV62NQ
    Jun 23, 2011 - Uploaded by 1A Auto Parts
    How To Install Repair Replace Parking Brake Release CableHandle ... or replace a broken or worn out parking brake release cable handle.

    Emergency Brake Pedal Assembly & Stuck Brake Cable ...

    ? 10:13
    https://www.youtube.com/watch?v=0jYfvthBzhU
    Apr 17, 2014 - Uploaded by corgLLC
    Emergency (Parking) Brake Pedal Assembly & Stuck Emergency (Parking) Rear Brake Cable The emergency ...

    E-Brake Cable Broken? Stuck Emergency Brake... Help Please ' Chevy ...

    www.tahoeyukonforum.com > ... > Engine & Drivetrain


Jan 25, 2016 | Cars & Trucks

1 Answer

Fault lights


That happened to me on my 2000 toyota corolla and it was in the linkage adjustment on my emergency brake handle. I tightened up the linkage and then when I would release the handle, the light would go out. Hope that solves your problem.

Jan 25, 2014 | Cars & Trucks

1 Answer

How do i tighten my emergency brake?


Adjustment is at the emergency brake assembly, look for a nut on the end of a threaded cable. rack vehicle or rear wheels on jack stands. Pull e brake 2 or 3 clicks, spin both rear wheels and compare resistance. Slightly tighten nut about 1 turn and try to spin rear wheels. Do this until the rear wheels are locked in place. Reassemble e brake assembly, un rack vehicle, and enjoy your freshly adjusted e brake!

Nov 30, 2010 | 2004 Kia Optima

2 Answers

Illuminated when emergency brake is not on.


Check your brake fluid. there is a float switch in the resevoir that will turn on the light.

Nov 28, 2010 | Acura CL Cars & Trucks

1 Answer

How do i tighten my emergency brake once i've changed my brakes


There should be 2 adjusting nuts on the cables on the e-brake handle.

Mar 04, 2010 | 2005 Volkswagen GTI

1 Answer

Replace emergency brake lever. In a 2008 ford focus


I have the same damned thing and it made the car fail an inspection. The brake works fine, it's just the cheap plastic button that disengages the ratchet that holds the lever broke.
It's like a rally car now (the lack of a lock makes hand brake skids easier).
I haven't found any solutions online, other than replacing the plastic handle and button as one assembly ... but what if something is broken inside?

Jan 26, 2010 | 2008 Ford Focus SE Sedan

1 Answer

2005 Outlander has now new rear brake shoes and


Under the center console is a Y in the cable that leads under and around the top/rear side of the brake handle. At the top/rear of the handle is a locknut and threaded shaft to adjust tension.

Be sure to not have any drag on the brakes when you are done adjusting!

Jun 12, 2009 | 2003 Mitsubishi Outlander

2 Answers

Emergency brake


look under the front of the rubber boot that covers the bottom of the park brake handle, u will see a nut on the end of the park brake cable, tighten it until u reach the proper adjustment.

Feb 27, 2009 | 2004 Kia Rio

1 Answer

Loose emergency brake on 2004 Saturn Vue


  1. Apply and fully release the park brake several times. Verify that the park brake lever releases completely.
  2. Turn ON the ignition. Verify the red BRAKE warning lamp is not illuminated.
  3. If the red BRAKE warning lamp is illuminated, verify the following:
    • The park brake lever is in the fully released position and against the stop.
    • There is no slack in the park brake cable.
  1. Turn OFF the ignition.
  2. Disable the SIR system.
  3. Remove the front floor console.
  4. With the park brake lever in the released position, using ONLY hand tools, loosen the adjusting nut completely to the end of the front cable threaded rod.
  5. Raise and support the vehicle.
  6. Remove the rear tire and wheel assemblies.
  7. Adjust the rear drum brakes.
  8. Ensure there is no brake shoe drag after adjustment by rotating the brake drums. If drag exists, re-center the brake shoes and perform the brake shoe adjustment again.
  9. Install 2 wheel nuts to the wheel studs and firmly hand tighten in order to retain the brake drums.
  10. Lower the vehicle to permit access to the park brake lever.
  11. Raise the park brake lever 1 detent position. Notice: Refer to Fastener Notice in Service Precautions.

Jan 14, 2009 | 2004 Saturn VUE

1 Answer

Tighten emergency brake


iit adjusts by the parking brake pedal

Nov 24, 2008 | 2005 Honda Pilot

Not finding what you are looking for?
2005 Ford Mustang Logo

331 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5572 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...