Question about Mazda B2600

1 Answer

I have a mazda bravo 4wd 2001 b2600, the head gasket blew and we replaced it and the timing chain, the engine now wont start straight away you have to crank it and rotate the distributor to get ot to fire, then when it does run it idles really fast at 2000rpm. The timing is correct as per the marks, I suspect there has been some damage to a sensor in the computer system, any ideas as to what it might be. Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 114 Answers

Sounds like ur throttle positioning sensors getn stuckor ur choke is sticking u sure ur at top dead center

Posted on Aug 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford Couirier/Mazda Bravo 1994 2.6 petrol 4x4 B2600 I need to buy new/used ECU (G618) replacement or upgrade for my 4x4 ute I want to know the compatible units i can use and best place to get one.


the ecu has to come out of the
same year and number as the engine and drive line
Ford Courier/Mazda Bravo 1994 2.6 petrol 4x4 B2600
source from
ebay
a 4x4 wrecker
an good auto electrican can referb your original
this is usa but might be a seller some where in australia

edit I added image of a G695
http://www.ebay.com/itm/OEM-91-92-93-MAZDA-B2600i-TRUCK-ENGINE-COMPUTER-CONTROL-MODULE-ECU-G618-18-881A-/1916530508691a07fc2d-2613-4d2f-a996-9a4d38ad626f.jpgford-couirier-mazda-bravo-1994-2-6#sln-36462275-ynwsor2g41t5qaon3uf1gyaf-5-2_2.jpgford-couirier-mazda-bravo-1994-2-6-ynwsor2g41t5qaon3uf1gyaf-5-3.jpg

Sep 11, 2016 | Ford Cars & Trucks

2 Answers

My 04 seabring is still overheating after replaceing the thermostat, and then wont start


If you have the 2.7L engine, you may have a bad water pump. The water pump is turned by the timing chain. When the water pump on those particular engines go out, tension on the chain goes away and retards the camshafts bad enough for it not wanting to start. Pull your oil dipstick out and see if you see signs of water in the oil. If there is, this is your problem. When the water pump goes out on those engines, it'll drain water straight into the front of the oil pan.

Mar 10, 2013 | Cars & Trucks

1 Answer

What if i replace my headgaskets and replaced my timing chains and resurfaces the heads want could make the my 2001 madza mpv minivan not start


It may be any number of things, but here's just a few:

1) Cam shaft position sensor incorrectly fitted or wiring faulty.
2) Compression incorrect due to over-skimming of the head.
3) Incorrect timing chain placement and/or faulty valve timing.

Nov 12, 2012 | 2001 Mazda MPV

1 Answer

2001 mazda bravo fuel pump relay location


thanks to all i will take a look dose anyone no what manual i need its a 95 ford courier 4x4 but ive been told that its a badge change by ford and mazdai canrt find any books on courier but thay llok identical ford here in australia wont give me any info on it i gess its the mantallity of people here sad

Aug 14, 2012 | 1988 Mazda B2600 Cab Plus

1 Answer

I need to set up the camshaft timing marks on a 1994 mazda b2600


its not just the camshaft timing marks you set up, you also have to have the crankshaft timing mark set right to or you may damage your engine
check the internet for the right timing procedure for you model car ok

Jun 11, 2010 | 1988 Mazda B2600 Cab Plus

1 Answer

Have Mazda bravo B2600 4WD ,has white smoke & oil from exhaust. Running rough as if on 3 cylinder


You dont say weather its a petrol or diesel engine as there a slight differance in the answer and if a turbo on a diesel thats even more of a differance, but taking it a petrol .
Well to start with the white smoke Isent smoke its water and after going through the engine it turns into Steam and thats what you see..
Running on 3 clyinders is caused through 1 cylinder isent working as a engine should and has a bad valve or a broken piston ring or more and even a cracked head and gasket letting the water through,,,also the broken ring works like a oil pump as if not firing given you power then it works like a oil pump and pumps it into the cylinder that dosent work only pumping oil into the hot exhaust system while running.CAUSING SMOKE
And if a turbo then could be the turbo bearings worn and pushing oil into the engine and still doing the same as before.
Let me know how you get on. RON

Nov 17, 2009 | 2007 Mazda B Series

1 Answer

96 brazo oil and mtal in over head cam engin stopped on highway


i have seen some mazda motors having busted cam shafts, so that's the only thing i can think of. if you didn't say behind the throtle body, i would say you have a busted piston but i doubt that's the case here.

Mar 02, 2009 | 1988 Mazda B2600 Cab Plus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

636 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...