Question about 1988 Ford F 350

1 Answer

45 psi fuel pressure good spark new distributor new control module new fuel pump and filter wont start unless u use ether any ideas?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Check your plugs confirm that you have the proper fuel pressure make sure your wires are all in good order good luck.

Posted on Aug 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 1987 ford ranger the engine turns over but it wont start


Spark at plugs? Fuel filter? Pressure on injector delivery line? Pressure relief valve? You may be able to measure fuel pressure at the pressure relief valve location. and return line. If you have spark, I'd say it's a fuel supply problem

Dec 21, 2014 | Ford Cars & Trucks

1 Answer

Will start and run a few seconds and stall out


COULD HAVE CLOGGED FUEL FILTER OR FAULTY FUEL PUMP.CHECK FUEL PRESSURE SHOULD BE 35 - 45 PSI. WITH NEW FUEL FILTER.IF FUEL PRESSURE OKAY, YOU INTAKE VACUUM LEAK,YOU COULD HAVE BAD SPARK PLUGS OR WIRES.COULD HAVE BAD DISTRIBUTOR CAP OR ROTOR.

Jul 17, 2011 | 1995 Ford Aerostar

1 Answer

I have a 1993 GMC Safari van code W engine with automatic transmission, cruise control. It is central port injection. My problem is it is it will not start. I have change the all parts in the distributor,...


Spray some carburetor cleaner into the engine an see if it starts ! I don't think 58 psi fuel pressure is enought ! Has to be above 60 psi .415-455 kPa (60-66 psi).

May 28, 2017 | 1993 Chevrolet Astro

1 Answer

New fuel pump and still wont start


1 Inspect Battery Battery Discharged or Faulty. 2 Inspect Battery Cable Corroded, Broken, Shorted or Poorly Connected Battery Cable. 3 Inspect Distributor Cap Distributor Cap Cracked or Burned. 3 Inspect Fuel Filter Clogged or Dirty Fuel Filter. 5 Inspect Coil - Ignition Faulty Ignition Coil. 6 Inspect Wireset Worn, Damaged or Faulty Spark Plug Wire(s). 7 Inspect Spark Plug Incorrectly Gapped or Fouled Spark Plug(s). 8 Inspect Starter Starter Motor Faulty. 9 Inspect Fuel Pump Low Fuel Pressure. 10 Inspect Solenoid Switch Faulty Starter Solenoid Switch. 11 Inspect Relay - Fuel Pumpat Faulty Fuel Pump Relay. 12 Inspect Fuel Injector Pressure Regulator Faulty Fuel Injector Pressure Regulator. 13 Inspect Ignition Switch Improperly Connected or Faulty Ignition Switch. 14 Inspect Starter Drive Faulty Starter Drive. 15 Inspect Fuel Injector Dirty or Worn Fuel Injectors. 16 Inspect Fuel Pump Strainer Clogged or Dirty Fuel Pump Strainerat. 17 Inspect Engine Control Computer Incorrect Operating Information Being Delivered and Sent From The EEC. 18 Inspect Fuel Tank Fuel Tank Empty. 19 Inspect Carburetor Carburetor Flooded or Faulty Choke. 20 Inspect Distributor Worn, Loose, or Incorrectly Installed Distributor.

May 22, 2010 | 2000 Dodge Caravan

1 Answer

I have a 1988 f-150 5.8 liter that has set up for 9 years,I have new gas ,new fuel filter,and have fuel at the test point on the injector fuel line. I don't know the psi at that point, I don't have a gauge...


Sounds like everything with the fuel is good. You will need to check the spark. Test crankshaft position tester, module and coil packs. If it has a distributor, test the pulse. Fuel pressure should be between 30-45

Sep 09, 2009 | Ford F-150 Cars & Trucks

3 Answers

The fuel pump pumps but on start up it dies


Flel regulator will only affect max fuel pressure only will not cause it to not start. try replacing fuel filter first if still does not get fuel then you need to see if it is fuel related or if you have a spark at the spark plugs, pull off a spark plug boot and put screw driver in it hold 1/4 inch away from bare metal and crank engine if you get a spark then it's fuel relateed if no fuel it can be the crank shaft sensor or the cam shaft sensor. let me know if it has fire.

Aug 30, 2009 | 1995 Ford F250

1 Answer

Isuzu Hombre pickup, 2.2L Vortec, Won't Start.


You need four things for an engine to run. 1. fuel 2. spark 3. compression 4. timing (spark at the right time. By your post it seems you have fuel and spark and you probably have compression unless you blew a head gasket. That leaves the timing. Check the timing and/or the timing belt or chain whichever you have.

Jul 01, 2009 | 1998 Isuzu Hombre

2 Answers

Truck would not start, gave it a blast of ether, it started


get your self a fuel pressure tester, hook it up to the fuel rail, you should get at least 30 psi with key on, 30 to 45 psi with engine running.

Mar 11, 2009 | 1996 GMC Suburban

2 Answers

Will not start 96 blazer


Go back to basics. Check if you have spark. From the coil and the plugs. Check if you have fuel pressure, check if you have compression on all cylinders. If you have all three action should happen.

Jun 10, 2008 | 1996 Chevrolet Blazer

3 Answers

Vehicle just keeps cranking wont start.


Make sure that your fuel presure is up to at least 60 psi if not that could be your problem. If not, make sure you are getting spark, if not could be your Crank sensor or ingniton module ECM. Usually if your Engine control module wouldn't be bad because of your fuel pump is working, but may not be putting out the proper pressure for the fuel system. Fuel Pumps are a Problem with that year..

Jun 08, 2008 | 2000 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...