Question about 1989 Toyota 4Runner

4 Answers

89 TOYOTA HILUX 22R PETROL 2 WHEEL . WHAT ARE THE TIMING MARKS , AND TAPPET CLEARENCE

Posted by on

  • RIVER 7 Aug 31, 2010

    WHAT ABOUT WHEN THE ENGION IS COLD AFTER A VRS KIT IS INSTALLED

×

Ad

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 17,970 Answers

Toyota Pick-ups/Land Cruiser/4Runner 1989-1996
Timing Belt

89 TOYOTA HILUX 22R  PETROL 2 WHEEL  .  WHAT ARE - 868bf15.jpg

Fig.: After rotating the engine, ALL the timing marks must align perfectly


NOTE: Mark the position of the belt if it is to be reused


Toyota Pick-ups/Land Cruiser/4Runner 1989-1996

Timing Chain - 22R and 22R-E Engines

98cd4d5.jpg

Fig.: Exploded view of the 2RZ-FE and 3RZ-FE engine timing chain components


fe3fa97.jpg

Fig.: Align the small timing mark of the balance shaft drive gear with the timing mark of the balance shaft timing gear


6dcfc6d.jpg

Fig.: Align the timing marks as shown
707bcfd.jpg

Fig.: Exploded view of the timing chain and cover on the 22R and 22R-E engines


Hope helps.

Posted on Aug 31, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 642 Answers

Turn the crankshaft so that the crank keyway is in 12-0'-clock position. Refit the cranksprocket. Fit the timing chain to the crank sprocket. It is marked in two places. The part that lines up with the crank is a single bright metal link. Fit the cam sprocket to the chain so that the timing mark on the sprocket sits between the two adjacent bright links on the chain and then place it on the camshaft. See that the chain is properly positioned between the guides . Turn the cam counterclockwise and fit the tensioner.

Posted on Aug 31, 2010

  • Rene Rossouw
    Rene Rossouw Aug 31, 2010

    Valve clearance is set with the enigine hot.
    0.008" Intake
    0.012" Exhaust

  • Rene Rossouw
    Rene Rossouw Aug 31, 2010

    If the engine is cold then you set them to the same setting. Start the engine and have it warm up. Then re-adjust.

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Toyota 4runner 2015 timing

Posted on Aug 03, 2014

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Please help me where is the timing marks for a 1987 toyota 22 r e motor

Posted on Jul 01, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I start the engine four warning lights do not go out. They are the water level, the alternator, the timing belt and engine oil level.


double posted 3 min apart,
back up and read my long post.
and be patent. your questions , lack facts.
id love to see that timing belt lamp.. my guess is you are guessing
at ICONS, lost your operators guide? that tells true meaning
seems so.
no country stated
nor engine type.
5th generation Hilux
sold with all these engines.
1.8 L 2Y-U I4
2.4 L 22R-E I4
3.0 L 3VZ-E V6
2.4 L 2L diesel I4
2.8 L 3L diesel I4

pick one,?

Feb 21, 2014 | 1996 Toyota Hilux

1 Answer

Patrol toyota hilux 2000 how to fix timming


if you can remove the timing cover and try to bring the engine using your hand with a tool by turning the crank shaft with the engine off and battery terminal off,to the timing marks. surely the camshaft and crank shaft sensors do have some marks. if it is diesel engine also the fuel pump has mark too. If you aligned the marks and are in a correct place then you problem is something else,If the marks are not aligned then you timing is wrong and try once more to fit it whilst in a correct place.

Sep 11, 2012 | 2002 Toyota Land Cruiser

1 Answer

Im going to replace the front crank seal( timing cover seal) this weekend), is it as easy as pulling the pully off the bottom, taking the old seal out with a screw driver or something, and tapping the new...


Provided that you are able to access it, then yes, there's no reason at all why you shouldn't be able to manage it quite simply. As you're probably aware, you need to be careful as you remove the old seal to make sure you don't damage the casing, and similarly when you replace the new one! Good luck!

Jun 13, 2012 | Cars & Trucks

1 Answer

Timing mark for toyota fj 62 3f petrol engine


Look on the back of the engine, on the same side as the plugs & distributer. There is a rubber cap on the fly wheel, and the timing marks are in there. Good luck!

Aug 02, 2010 | 1989 Toyota Land Cruiser

1 Answer

Where is timing chain adj to get t chain off 92 hilux 22r


There is no adjusment,you have to remove the timing cover to get the chain off.

Apr 14, 2009 | 1992 Toyota Pickup

1 Answer

Toyota 89 4x4 22r-e Timingbelt


I've rebuilt my engine on my '86 22R-E.
I'm willing to bet the timing chain cover it cracked if the timing chain broke. Coolant does run through the timing chain cover and the water pump is mounted to it.

Best thing to do is get a Chilton manual at the Autoparts store. It runs about $20. That way you have better research material. It will give you step by step procedure to do repairs.

Apr 11, 2009 | 1989 Toyota Pickup SR5

1 Answer

Timing marks


send me your email and i will email you the full workshop manual if i can. The timig marks marks are pretty easy to see any way. 1 on cam is at top. 1 for fuel pump is at about 2 oclock position

Oct 06, 2008 | 1995 Toyota 4Runner

2 Answers

Tappet problem


the check prosidure requires you engine be cold engine at top dead center at #1 cylinder and cams timing markes aligned to markes. check only intake and exaust lifters with lobes in the released position. intake is .15-.25mm and exaust is .25-.35 mm. rotate the engine 180deg. to check the remaining cylinders. if exsesive play is exsperianced. You must remove cam shafts, and add a new shim to remove the clearence. this includes the timing chain.most engine machine shops have these shims.really suggest you go online for a sevice manule. you can ruin this engine if not performed properly. This is a zero clearence engine! (no clearence between valves and pistons.) any more questions i can help you with just send to my e mail.

Jun 25, 2008 | 2000 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

3,699 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...