Question about 1991 Nissan Maxima

2 Answers

1991 Nissan Maxima will only go several feet in Drive, then when engine and transmission warm, transmission no longer engages at all. Engine is running fine. Do I need to get transmission replaced or rebuilt?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Had the same problem. it does not have a filter it has a screen and you must remove the engine and transmission to get to it. I changed the oil aie I do not know if this would help you. Itout of me surprised the heck t works finnd now

Posted on Oct 22, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem on the same year and i think its the filter but i cant find it there is no pan on the bottom and i have tried lookin every where and the guy at orileys said it was internal and i would have to take it to get it done but i can do it but i need to know where it is?

Posted on Sep 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1991 Nissan maxima wont go forward


you have a transmission problem your forward clutches may have to change,did you check the shift cable by the neutral switch if all those area check ok the transmission have to be repaired

Feb 25, 2015 | 1991 Nissan Maxima

3 Answers

Why is my 1996 nissan maxima not accelarating pass 20 mph?


Check all your connectors especially the MAF.

Sep 02, 2014 | 1996 Nissan Maxima

1 Answer

Ignition timing



1991 Nissan/Datsun Truck D21 Truck 2WD 3.0L FI 6cyl

The Ignition Timing
15 Degrees Before top dead center*Warm idle speed 750 RPM*Transmission in neutral (Parking brake engaged)*All accessories off.

1991 Nissan/Datsun Truck D21 Truck 2WD 2.4L FI 4cyl

The Ignition Timing
10 Degrees Before top dead center*Warm idle speed 800 RPM*Transmission in neutral (Parking brake engaged)*All accessories off.

Mar 24, 2014 | 1991 Nissan Pickup

2 Answers

My 2005 Dodge ram 1500 5.7 Hemi has a super hard brake pedal with little braking action.


Has the brake pipe been crushed during the engine change, take a look.

Jun 22, 2017 | Cars & Trucks

2 Answers

1991 nissan maxima i press the gas when in gear and keeps revving up but will go forward slowly


Check the transmission for leaks and fluid level. And fix as needed. However, seems like your transmission is slipping.

Jun 27, 2012 | 1991 Nissan Maxima

1 Answer

2001 nissan maxima won't engage in D


Hello
This engine and the transmission in this car are fully electronically controlled by a computer called the PCM or TCM for the transmission, when problems like this occur fault code or codes are set in the PCM/TCM memory. What must be done now is to have the memory read to retrieve this fault code. This is called a system scan, the system is called the OBD2 electronic engine control system. Based on the results of the fault codes you perform diagnostics and repair the problem, that can be a sensor, wiring or even in rare cases the PCM/TCM has failed.



Jun 18, 2012 | 2001 Nissan Maxima

1 Answer

I have a 1995 nissan maxima. It wont start. Replaced the starter. Battery is fully charged. What else could it possibly be?


hi there does the engine crank ,if not check the transmission neutral safety switch
trans switch keeps the engine from starting in gear if defective it will not let the starter engage
the switch is mounted on transmission housing it has two plugs mack shore that it is plugged
in

good luck

Jun 25, 2011 | 1995 Nissan Maxima

2 Answers

Car will start but will not move forward or backwards can u help?


Mke sure that the transmission is working. you can tell if the engine rpm changes when you put it gear (forward or reverse) if it does not then you need to check the level of the transmission fluid for an automatic or you may have clutch problems if it is a manual transmission. if you have more details on the transmission type (auto or manual) and if it is doing anything when you try to get it to move that would be helpful.

Nov 20, 2010 | 1991 Nissan Maxima

1 Answer

Car wont drive


when it won't move can you reve the engine? and if so does it try to engage into any gears at all?

Aug 01, 2008 | 2005 Nissan Maxima

Not finding what you are looking for?
1991 Nissan Maxima Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...