Question about 2000 Oldsmobile Bravada

1 Answer

I'm looking for a replacement piece for the right backbumper corner. i can't find anything and need it asap.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 432 Answers

Good Evening, first off you could try your local salvage yards, if not I have a couple web sites that may be of assistance, first I would try car-part.com for used parts possibly in your area, or certifit.com for new aftermarket replacement. I hope this helps, if you have any questions please feel free to ask.
Thanks,
Joey

Posted on Aug 31, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need help asap on replacing wires on distributor cap, i understand the firing order but i cant figure out where 1 is on cap. is it next to the stick out part.


Im sure youve figured this out, but just in case!

Find the connector that plugs into the distributor.

Follow the rectangular shaped top part on the distributor
to the opposite side away from the connector.

Number 1 wire is at the right corner of the rectangular
top part when youre standing at the front left corner
of the car by the battery and looking along that rectangle on top.
Its right against the thumbscrew that tightens down the air
filter housing.

number 8 is the next one to the left of number 1.

can post a pic if you need.

Jul 11, 2011 | 1988 Cadillac Sedan DeVille

1 Answer

I can not get my tailgate to unlatch and open. what do i need to do to get it to open?


i had the same problem with my 2002 1500, the problem lies with a clip or both clips being broke under the tail gate latch that you pull on to open it. you can check this by getting a flash light and look up under the latch as you have it pulled up, you will then see if you have a broken clip. chevy dealer has these. to replace the clips you have to remove the square plastic piece around your latch handle, this square piece has 4 plastic tabs 2 on the upper piece of the square in the corners and the low portion of the square has 2 in the corners also, get 2 putty knives and slide one under the bottom half of the square plastic piece 3 quarters of an inch from the corner, then slide another putty knife under the very corner, note cover this knife with tape as it will scratch your paint if not careful. you will hit a plastic tab shove in carefully to disengage the tab, do this on the other side,then you can remove bottom half of plastic trim, then proceed to do the same step on the top of the plastic trim, once this is done then take it off carefully these plastic tabs are fragile! then proceed to look in the area to see which clip is to be replaced, use needle nose pliers to install new clip, just put clip on shaft that has dropped down, this would be the one that has the broke clip. then after installing new clip try your tailgate if it opens, if it does all is well. install your square plastic piece top first, then the bottom until it snaps into place.

Dec 11, 2010 | 2002 Chevrolet Silverado 1500

1 Answer

I am leaking antifreeze under my blazer onto the ground but not inside the vehicle. My blazer does not overheat, my heat will work sometimes while driving but as soon as I stop or slow down it blows cold....


you need to figure out where the coolant is leaking from. Some common areas are

the water pump in which case you would be able to remove the splash shield from under the front of the vehicle and using a flash light be able to see coolant coming out of the weep hole of the water pump.

The intake gaskets. Look in the corner of the intake valley where the head and lower intake meet right under the a/c compressor. If you see coolant its leaking and needs to be replaced.

The radiator, you'll be looking for wet spots on the side tanks of the radiator. Loose upper and lower radiator hoses could also cause this.

If you can't find anything visually you'll need to bring it in and have it pressure tested.

Nov 23, 2010 | 2001 Chevrolet Blazer

1 Answer

Driver's inside door handle broke. How do I get


found this while looking to replace speakers:

DOOR WITH POWER LOCKS AND WINDOWS First remove the triangle piece in the top corner of the panel (piece closest to the outside mirror). This can be done with a plain screwdriver and just a little
prying and it will snap off. Second, remove the door lock inset, same screwdriver, little prying and it snaps out. Next remove the cover inside the door handle, same screwdriver, pry and snaps out
(turn it upside down and slide it off. Now you will need to remove the cover that holds the window
and door lock buttons, same screwdriver and pry upwards just a little and should pop off. Ok now you
will need a small socket to take out three screws. One is inside the button panel you just took off,
the second is inside corner of the door arm, (the handle you grab to shut the door, look under it,,
see it yet, yeah thats it). The last screw in on the very bottom of the whole door panel, you will
have to get on your hands and knees to see this one (yeah thats it right there). Now would be a good
time to remove the door light on the corner, same screwdriver, pry from the red lens side outward,
once out, remove the wire termial. Ok.... now grab the under side of the panel where that last screw
was and lift upwards, apply a little more pressure till the panel pops upward about an inch. Now your
door panel is loose, you can lift it off a little but you will need to remove the wire from the tweeter.
The termial has a locking tab you need to press down to remove it.

Apr 30, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

Need part name or description


it's called a FILLER piece. I can be ordered at dealer or a local junk yard. Just replaced one , cost for part was $15 used.

Apr 21, 2010 | 2004 Toyota Corolla

1 Answer

How to replace headlight in 1991 dodge dakota?


The grille work on these trucks is divided up to three pieces. Right, left, and center.

1. Open hood
2. Remove the two top screws in the corner grille work.
3. Remove the two lower screws in the corner grille work. (these are located right between the bumper and the grille work). Let's just say they are not easy to remove. You would be surprise how many never reinstall these screws.
4. Lift corner grille work away and you will be able to see the screws for the metal frame that surrounds the headlight remove them and replace headlight.
5. Reverse order to install.

Nov 20, 2009 | 1991 Dodge Dakota

1 Answer

Replacing broken front corner light panel on Volvo 850


When you open the hood, look directly behind the headlight. all the way in the corner and a little way down should be a hook. I usually use a screwdriver and pull directly outward and then a little to the right or left. Then bring the hook back and the corner light should be disconnected. Then you can pull it out and do what you need to do. When you put it back, its a pain because you have to get the hook into a plastic groove. Make sure that you know where the plastic piece is before you start, just get a flashlight and find it. Then use your screwdriver the pull the hook up and get it into the groove. Presto!

Mar 05, 2009 | 1995 Volvo 850

1 Answer

Right signal flasher


i belive its in the fuse box, a rectangle metal piece, or above the diagonstic plug

Jun 30, 2008 | 1993 Buick LeSabre

3 Answers

Replace tail light bulb


1. open tailgate. 2. remove corner floor piece by lifting. 3. remove corner side panel. pull out from tab on bottom. 4. remove two hex bolts(#10) to release light housing. they look like large allen wrenches. 5. replace bulb(s) and refasten again.

May 15, 2008 | 2004 Volvo XC90

Not finding what you are looking for?
2000 Oldsmobile Bravada Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...