Question about Oldsmobile 98

1 Answer

Where can I find a free diagram and directions to install serpentine belt for 1996 Oldsmobile 98?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Go to the Google search engine, type in "1996 Oldsmobile Serpintine Belt routing Diagram", and the first row of stuff that pops up has the pictures for all the different engines of that year. Just pick the one that has the same number and location of pulleys as your motor. MAny parts manufacturers also have online help. For example, if you're installing a goodyear belt, visit their website, which is probably listed on the cardboard sleeve the new belt came in.

Posted on Aug 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Diagram for serpentine belt 96 Oldsmobile 88


Posted by Asker under the 1985 Oldsmobile 98 for a 1996 Oldsmobile 88.
I do not know if you have either the 3.8L or 3.8L Super Charger, or what Engine Options (AC/No AC, etc.) you have. The Link has several Diagrams to match your specific vehicle engine.
For the 1996 Oldsmobile Eighty-Eight:

Click on the following direct, free Link:
http://www.2carpros.com/car_repair_information/year/1996/make/oldsmobile/model/eighty-eight/1996_oldsmobile_eighty-eight_drive_belt_routing_diagram.htm

Apr 18, 2010 | 1985 Oldsmobile 98

1 Answer

How do i change alternator belt on 1996 nissan sentra


Click on the following free direct Link. It has several Diagrams including the correct Serpentine/Drive Belt Diagram for your 1996 Nissan Sentra 1.6L DOHC In-Line 4-Cylinder. Included are Instructional and Directional Diagrams including how to remove/replace your Alternator Belt and set the proper Tension.

http://www.2carpros.com/car_repair_information/year/1996/make/nissan/model/sentra/1996_nissan_sentra_drive_belt_routing_diagram.htm

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!



Apr 06, 2010 | 1996 Nissan Sentra

1 Answer

How to remove and replace a serpentine belt 96 saturn


Click on the following free, direct Link. It has all the Serpentine Belt Diagrams you will need for the 1.9L 4-Cylinder Engine and various Engine Options (AC/No AC etc.), complete with Instructional and Directional Diagrams.

http://www.2carpros.com/car_repair_information/year/1996/make/saturn/model/sl/1996_saturn_sl_drive_belt_routing_diagram.htm

Let me know if this helped or if you have additional information or questions. Feel Free to contact me at FixYa.com!

"HOW TO":
Standard Rules to Removal the Serpentine Belt with an Automatic Tensioner:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.

Apr 04, 2010 | 1996 Saturn SL

1 Answer

Need a diagram of how a serptine belt is installed on a 1990 olds cutlass ciera 2.5 lieter motor


Click on the following free direct Link. It has the Serpentine Belt Diagram and Tensioner location for your 1990 Oldsmobile Ciera, depending on your size 2.5L Engine options (AC/No AC, etc.).

GENERAL/Standard Rules to Removal the Serpentine Belt with a Tensioner:
A. Find the Tensioner(s). (See Diagrams on Link)
B. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
C. Remove the loosened belt off one of the other more easily accessed Pulleys.
D. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with Tensioners:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.


Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

http://www.2carpros.com/car_repair_information/year/1990/make/oldsmobile/model/cutlass_ciera/1990_oldsmobile_cutlass_ciera_drive_belt_routing_diagram.htm

Feb 20, 2010 | 1990 Oldsmobile Cutlass Ciera

1 Answer

Looking for a serpentine belt diagram for a 96 Olds Aurora witha 4.0. The diagram is gone from under the hood


CLICK on the following LINK.
It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1996/make/oldsmobile/model/aurora/1996_oldsmobile_aurora_drive_belt_routing_diagram.htm

Jan 17, 2010 | 1996 Oldsmobile Aurora

1 Answer

Need diagraphm for 1996 oldsmobile serpentine belt


YOUR PARTS STORE SHOUK\LD BE ABLE TO HELP YOU.

Jan 05, 2010 | 1996 Oldsmobile Ninety Eight

1 Answer

How to install serpentine belt on 1996 dodge caravan se


Good morning! I am enclosing a serpentine belt routing diagram to aid in the installation of your serpentine belt. There are 4 different engine possibilities but i have enclosed all. The serpentine belt tensioner is released by rotating in a clockwise direction as shown in the diagrams. Engine configuration will determine what tools you need but the installation is relatively easy to do. Have a great day!4c86670.gif8f5ea2e.gif68b7bf5.gif

Oct 04, 2009 | 1996 Dodge Caravan

1 Answer

Serpentine belt


Click on the following free direct Link. It has the correct Serpentine Belt Diagrams for your 1996 Chey Tahoe 5.7L depending on your Engine Options (AC/No AC etc.).

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1996/make/chevrolet/model/tahoe/1996_chevrolet_tahoe_drive_belt_routing_diagram.htm

Jul 03, 2008 | 1996 Chevrolet Tahoe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...