Question about Ford F-150

1 Answer

Okay i bought a truck that had a 302 fuel injected but was changed over to carb. i was drivin it and was runin good than went somewheres and it just acted like it ran out of gas so i changed tha fuel pump (manual). but than i put a small electric fuel pump on it... it still wouldnt start.. i have put a rotor button on it, cap, wires, plugs, pick up coil.. and still can not get it to start.. it turns over fine but just will not start.. if anyone has any ideas email me at. austinwest2040@yahoo.com...

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 432 Answers

Good Evening, I have been in your shoes before, however I have figured one thing on the old fords is to change the ignition module first, we had one than ran every day started it one morning it was fine, then that afternoon went to start it and it would not run. Just like you I tried everything, then I changed the ignition module and away it went. I hope this helps some, and if you have any questions please feel free to ask.
Thanks,
Joey

Posted on Aug 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 88 ford bronco full size 302 I put a new fuel pump and relay and it still don't start


are you getting spark at the plugs is this fuel injected or carbed try spraying gas in to it to prime it is the coil working did you check the fuse

Feb 21, 2015 | Ford Cars & Trucks

1 Answer

Where are the fuel pumps on a 1982 ford f150


Well a 1982 model should have a carb, so there should be a mechanical fuel pump on the side of the block near the front.
Just follow the fuel line from the carb.
1985 was the first year for fuel injection on the 302 engine.

Sep 06, 2014 | Ford F-150 Cars & Trucks

1 Answer

1990 ford bronco with fuel injected 302 idles and revs fine out of gear but has loss of power and pings when in gear and accelerating...


First thing to try would be different fuel. Use a fuel stabilizer and fill with good gas. see if that helps. Also, check the fuel pressure.

Nov 11, 2013 | 1990 Ford Bronco

1 Answer

Truck won't start unless I add fuel to the carburetor (fuel injected) and there is lots of fuel pressure at the rail but nothing going into the carb. Any idea


From your vid, it looks like you don't have a dedicated EFI system.(electronic fuel ignition) You have what's called a throttle body system. It is a Frankenstein(hybrid) between carburetor/fuel injector system. Most commonly with these trucks, and I love to work on them, there will be a fuel filter located somewhere between the tester, and the throttle body. there could be more than 1 if you aren't the original owner of the truck, someone else could have stacked a couple in line. If that is not the case, it could also be a vacume issue. Good luck.

Mar 29, 2013 | Cars & Trucks

1 Answer

What is the stock engine size in a 1988 crown victoria


There is a 302 fuel injected motor, also a 351 Windsor 2 bbl carb motor.

May 08, 2010 | 1988 Ford Crown Victoria

1 Answer

Fuel Injection Problem


Is your cat. convertor blocking up? If it is this condition, it could very well be the problem. Disconnect the convertor start the car & see if it takes the gas well. If it does, change the cat. convertor. Good luck!

Apr 22, 2010 | 1985 Lincoln Town Car

1 Answer

What all do you need to do to convert a 1992 ford 5.0 out of an f150 from fuel injection to a Carb.? I know that you need a carb, intake, and fuel pump. I'm putting this motor in my 1984 mustang it had a...


There are special electronic fuel pumps you can get for this kind of conversion that wont put to much fuel pressure in the carb and blow the bowls.
As long as the distributer is vacuum advance and for a 302 it should be able to work. The main difference will be the firing order on the truck engine may be different. So you have to make sure your #1 cylinder is at top dead center and route the post on the cap its pointing at to the #1 cylinder and go from there.
The intake and carb you have should also work.

Mar 26, 2010 | 1984 Ford Mustang

1 Answer

Change a fuel injected engine to carbs. 302 ford want to put it into a 65 falcon


this can be done but you have to make sure the intake you buy will bolt up to the EFI engine which you can find at Summit Racing or Jegs order online or from a catalog they will send you for free where you can also find all the linkage and everything else for the swap.

Oct 06, 2009 | Ford Crown Victoria Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...