Question about 2007 Dodge Ram Truck

1 Answer

I have to replace my serpentine belt and don't have a diagram on how the new belt goes on.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I recomend drawing a diagram of the current path of the belt. Sometimes there a lot of pullys. Take your time. It can help alot if you have a proper tensioner tool.

Posted on Sep 02, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3


Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb

    Sep 21, 2011 | 2003 Chevrolet Impala

    2 Answers

    Hi when are you supose to change the serpentine belt on a 2001 Saturn SC2? My SC2 has almost 51,000 miles on it with the orginal belt? Thanks,


    The manufacture recommends a serpentine belt replacement every 50,000 miles. However, your serpentine belt should be inspected often for cracks, rips or warping. This can also tell you if you have a pulley that is malfunctioning. Also when you have your serpentine belt off spin your pulleys and make sure they spin free with no hang ups. If you get a hangup you may need to replace that pulley. If you want to replace the serpentine belt yourself here are the steps you take to replace it. This will save you around $50 in labor charges.
    1. You will need a 15mm wrench.
    2. Next you will want to make a diagram of the position of the belt in relation to each pulley. This is important because the belt only goes on one way.
    3. Put the wrench on on the tension pulley
    4. Pull the wrench towards the car releasing the tension on the belt
    5. Slide the belt off
    6. Slowly let the tension pulley release to it's start position
    7. Get the old belt and new belt and compare the two in size, and the amount of groves they have. The belts should be an exact match with the exception that the old belt may be minutely longer from being stretched during use.
    8. Set the new belt on a few pulleys per your diagram
    9. Now get the wrench again and place it on the tension pulley and pull towards the car placing the rest of the belt on the pulleys exactly as the diagram says.
    10. Release the tension pulley gently.
    11. Now you want to inspect how the belt is laying on the pulleys. Make sure the belt is on nice and even and exactly as the diagram says.
    12. Providing all is well to this point turn your car on and go inspect the belt with the engine running and make sure it is staying on the pulleys as it should.
    13. That should be it. 15 minutes and you saved $50. I will upload a diagram for your Car and engine as well.
    ironfist109_2.gif

    Mar 23, 2011 | Saturn SC2 Cars & Trucks

    2 Answers

    Change serpentine belt on 06 sienna


    1. 1 Check to ensure the Sienna's engine is cold, then make sure the Sienna is in park, the ignition is in the off position and the key is removed from the ignition to prevent any possibility of the engine engaging during the serpentine belt replacement.
    2. 2 Open the hood and locate the serpentine belt routing diagram sticker on the side of the engine casing. Study it for a moment before removing the existing belt. It is essential the new belt be installed exactly as the diagram indicates.
    3. 3 Find the tensioner pulley, the main pulley that controls the serpentine belt, and fit a 1/2-inch socket wrench over the self-tensioner on the outside of the pulley.
    4. 4 Pull the wrench to the left to move the pulley forward, which loosens the belt, then remove the belt.
    5. 5 Compare the old serpentine belt with the new, replacement belt for length, width and number of grooves on the belt's underside. Be certain the replacement belt is the right part.
    6. 6 Fit the new belt on to each pulley according to the serpentine belt routing diagram on the manufacturer's sticker, or according to the drawing made prior to removing the old belt. Fit the new belt on to the tensioner pulley last, again applying pressure on the pulley's self-tensioner with the half-inch socket wrench to loosen the pulley.
    7. 7 Release the pressure on the self tensioner and allow the tensioner pulley to ease back into place, thereby tightening the new serpentine belt with the appropriate tension.
    8. 8 Remove the wrench and close the hood.
    Thank you and good luck,
    Lee

    Aug 26, 2010 | 2006 Toyota Sienna

    1 Answer

    Serpentine belt replacement


    draw a diagram first of how it goes around the pulleys.make sure its accurate,and each pulley is named,ie aircon,geni,p/steer/crank/,then usually just need to detension belt by backing off the belt tensioner[use good size spanner or fixed socket on bar]slip belt off.the tensioner usually just springs back,fit new belt reverse way,check against diagram before starting

    Jul 01, 2010 | 1995 Ford Thunderbird

    3 Answers

    I need help with removing a serpentine belt on a 1997 ford expedition and replace it


    FIRST YOU NEED A SERPENTINE REMOVAL TOLL FOR FORD VEHICLE AND CONNECT TO THE BELT TENSIONER AND PUSH UP OR DONW AND SLIDE BELT OFF '''NOTE THE WAY THE BELT GOES ON''

    Sep 16, 2009 | 1997 Ford Expedition

    3 Answers

    I need a diagram for a serpentine belt for a 1999 ford escort zx2


    This information can be found at www.serpentinebeltdiagram.com
    They have all the belt routing info for any vehicle with a serpentine belt.
    Hope this helps....

    Jul 04, 2009 | 1999 Ford Escort

    2 Answers

    Diagram of how serpentine belt goes. Last belt had one on pkg.


    for the most part there is a diagram under your hood showing you how the new belt goes on try this website to see if they have your car listed its www.autozone.com you can also ask the part store where you buy the new belt from for a diagram

    May 02, 2009 | 1992 Mercury Grand Marquis

    Not finding what you are looking for?
    2007 Dodge Ram Truck Logo

    231 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dodge Experts

    yadayada
    yadayada

    Level 3 Expert

    75197 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7782 Answers

    Are you a Dodge Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...