Question about Oldsmobile Intrigue
You should see 3 plug wires on the front side of the engine,remove them twist and pull straight out,to remove the wires.do not get them crossed,but place them where you know they will stay ,since they need to go back to the same spot,or plug.
The back side may be more difficult.If you cant reach them from the top you may need to go from the lower side under the car!! hopefully you can see the wires and remove them and the plugs from the top. A short length of 3/16 rubber vacumn line is verry useful to reinstall the plugs back into the plug holes,since the plug socket may be awkward,and you dont want to start them cross threaded,esp if the heads are aluminum.And if they are they need to be coated with anti seizeing compound! A gray looking grease!
Make sure the plugs have the right gap! Dont drop them on the dirty ground or hard concrete,if you do clean them and regap! Take your time,if you can and you may save some $$$$ good luck!
Posted on Sep 02, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 19, 2015 | 2000 Oldsmobile Intrigue
May 03, 2011 | 2000 Oldsmobile Intrigue
Mar 08, 2011 | 2000 Oldsmobile Intrigue
Jun 19, 2010 | 2000 Oldsmobile Intrigue
Mar 26, 2010 | 2000 Oldsmobile Intrigue
Mar 09, 2010 | 2000 Oldsmobile Intrigue
May 17, 2009 | 2001 Oldsmobile Intrigue
110 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: